From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Stefan Roese" <stefan.roese@esd-electronics.com>
To: "Laurent Mohin" <laurent.mohin@acterna.com>,
	"Michael Meriin" <Michael@KSWaves.com>
Cc: <linuxppc-embedded@lists.linuxppc.org>
Subject: Re: How to change endian attribute for a memory region
Date: Tue, 15 Oct 2002 11:55:51 +0200
Message-ID: <EFEAIMDCOOOHIEPHDNFJAENOEHAA.stefan.roese@esd-electronics.com>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
In-Reply-To: <OF5FAD415F.66B42502-ONC1256C53.003189A8@eni.wago.de>
Sender: owner-linuxppc-embedded@lists.linuxppc.org
List-Id: <linuxppc-embedded@lists.linuxppc.org>


Michael,

why don't you use the MD4 signal of the Epson Chip to configure it as big
endian device? Or am I missing something here?

Best regards,
Stefan.

> -----Ursprüngliche Nachricht-----
> Von: owner-linuxppc-embedded@lists.linuxppc.org
> [mailto:owner-linuxppc-embedded@lists.linuxppc.org]Im Auftrag von
> Laurent Mohin
> Gesendet: Dienstag, 15. Oktober 2002 11:08
> An: Michael Meriin
> Cc: linuxppc-embedded@lists.linuxppc.org
> Betreff: Re: How to change endian attribute for a memory region
>
>
>
> Michaęl,
>
> I can't connect the chip as a byte wide device due to performance
> degradation.
> Due to other constraints, I can't invert MSB and LSB. In fact,
> due to color
> mapping, if I work in 8 bit per pixel, I must address my
> framebuffer in big
> endian mode. In 16 bit per pixel, I need to use little endian mode.
> So I really need to change the endian attribute.
>
> Thanks for your answer
>
> Laurent
>
>
>
>
> "Michael Meriin" <Michael@KSWaves.com> on 14/10/2002 10:57:00
>
> To:    linuxppc-embedded@lists.linuxppc.org, Laurent
>        Mohin/SE/Wavetek@Global
> cc:
> Subject:    Re: How to change endian attribute for a memory region
>
>
>
> > I'm trying to interface a 405GP chip with an EPSON S1D13506 graphic
> > controller. Because the EPSON chip is a little endian, I need to have my
> > framebuffer memory acceded in little endian mode.
> > What is the best way to change endian attribute for a specific memory
> > region (ioremap little endian)?
> >
> > Laurent
>
> I suggest you to connect it to the uP as a byte wide device, this will
> immediately solve your problem.
> The second way you can do it for 16 bit bus to connect MSB and LSB wise a
> wiser.
> >
> Best Regards,
>                      Michael Meriin
>
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/