* pins sequence
@ 2001-06-22 10:10 amyyah
2001-06-23 13:58 ` Matt Porter
0 siblings, 1 reply; 2+ messages in thread
From: amyyah @ 2001-06-22 10:10 UTC (permalink / raw)
To: linuxppc-embedded
Hello.I use MCPN750 CPU-Board.And there's serial port(COM1,8 pin) on its front panel. How can I turn it into normal RS232 connector (9 pin)? What's the pins sequence?
************************************
ÁôÑ§ÒÆÃñ,Ãâ·ÑÆÀ¹À.
http://www.mercan.com.cn/mercan2000/china.htm
¶¨ÖÆÖлªÍø¶ÌÐÅÏ¢£¨http://sms.china.com£©£¬ÌìÆø¡¢ÐÂÎÅ¡¢¹ÉÊÐÐÐÇéÊÖ´¥¿ÉµÃ¡£
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: pins sequence
2001-06-22 10:10 pins sequence amyyah
@ 2001-06-23 13:58 ` Matt Porter
0 siblings, 0 replies; 2+ messages in thread
From: Matt Porter @ 2001-06-23 13:58 UTC (permalink / raw)
To: amyyah; +Cc: linuxppc-embedded
On Fri, Jun 22, 2001 at 06:10:10PM +0800, amyyah@china.com wrote:
> Hello.I use MCPN750 CPU-Board.And there's serial port(COM1,8 pin) on
> its front panel. How can I turn it into normal RS232 connector
> (9 pin)? What's the pins sequence?
RTFM
MCPN750 CompactPCI Single Board Computer Installation and Use, July 2000
Page 4-17
Pin Signal
--------------
1 DCD
2 RTS
3 GND
4 TXD
5 RXD
6 GND
7 CTS
8 DTR
--
Matt Porter
MontaVista Software, Inc.
mporter@mvista.com
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2001-06-23 13:58 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-06-22 10:10 pins sequence amyyah
2001-06-23 13:58 ` Matt Porter
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).