From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Stephan Linke" <Stephan.Linke@epygi.de>
To: "Linuxppc-Embedded" <linuxppc-embedded@lists.linuxppc.org>
Cc: "Xiaogeng (Shawn) Jin" <xjin@redswitch.com>
Subject: RE: fast ethernet LXT972A support
Date: Fri, 23 Aug 2002 11:04:02 +0200
Message-ID: <FCEAKDJJAPHPLJFINDAJGEBDCIAA.Stephan.Linke@epygi.de>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
In-Reply-To: <3D654892.30500@redswitch.com>
Sender: owner-linuxppc-embedded@lists.linuxppc.org
List-Id: <linuxppc-embedded@lists.linuxppc.org>


Hi,

I'm using the LXT971 settings for an LXT972 on a 857 board and It's running
fine...

Regards, Stephan

(see my response to "MPC857T FEC/MII failure" :o))

> -----Original Message-----
> From: owner-linuxppc-embedded@lists.linuxppc.org
> [mailto:owner-linuxppc-embedded@lists.linuxppc.org]On Behalf Of Xiaogeng
> (Shawn) Jin
> Sent: Donnerstag, 22. August 2002 22:25
> To: linuxppc-embedded@lists.linuxppc.org
> Subject: fast ethernet LXT972A support
>
>
>
> I noticed that only LXT970 and 971 are supported in the lastest kernel
> distribution from DENX. But the comments in fec.c say "includes support
> for following PHYs: QS6612, LXT970, LXT971/2". Does it mean that LXT972
> can use 971's driver? If not, basically what kind of modification is
> needed? Thanks.
>
> - Shawn.
>
>
>
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/