From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Mon, 06 Dec 1999 10:56:02 -0700 From: "Joseph N. Hall" Reply-To: " "@5sigma.com Subject: pcmcia enet on pb2400 (more info) To: linuxppc-dev@lists.linuxppc.org Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; CHARSET=US-ASCII Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: The attempt to boot is dying during the pcmcia memory probe. I am using the following in config.opts: > include port 0x0-0xfff > include memory 0x90000000-0x90ffffff Both slots are filled. I get a single high beep and then a crash. The above configuration is reported to work with pcmcia-cs-3.0.8 LinuxPPC R4 + 2.2.1 kernel on a pb2400 (confirmed with a Japanese user). It appears that I am using 2.2.6-15a from the 1999 Q3 RPM. Is this broken? If so, what should I try next? RSVP to the address below or joseph@5sigma.com for more info. Thanks, -joseph -- Joseph N. Hall, 5 Sigma Productions mailto:" "@5sigma.com Author, Effective Perl Programming . . . . . http://www.effectiveperl.com Perl Training . . . . . . . . . . . . . . . http://www.perltraining.com ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/