From mboxrd@z Thu Jan 1 00:00:00 1970 Reply-To: From: "Allen Curtis" To: "Ing.Gianfranco Morandi" , "LinuxPPC" Subject: RE: my_console_write Date: Tue, 15 Oct 2002 07:23:52 -0700 Message-ID: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" In-Reply-To: <003301c2735c$4def2960$0700a8c0@pc005> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: > After this no other messages are shown on the console and the program is > running in the infinite loop. > > I have then tried to stop the PPCboot over the prompt, giving the command > "bootp" and "bootm" manually. > There could be a couple problems here: 1. With the EST8260 configuration, the simple boot loader is used and it receive a bd_info structure describing clocks etc. Is this correct? 2. There was a problem in embed_config.c where the code to initialize the 8260 clocks was not called. Check that this is right. 3. We had an infinite loop problem with a different PPC. I believe it is decompress.c, where all the boot messages are printed from, right after if calls embed_conf() it falls into a loop looking for keyboard input for custom parameters. You can try commenting out this loop. I hope this helps. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/