* 8260 w/256MB RAM problem
@ 2002-09-10 3:32 Allen Curtis
0 siblings, 0 replies; only message in thread
From: Allen Curtis @ 2002-09-10 3:32 UTC (permalink / raw)
To: Ppc Embedded
I have an 8260 base board with 256MB of RAM. If I tell the system that there
is 256MB it boots, sort of, but /proc only contains "mounts". (Note: I have
been running this as if there was 128MB-0x08000000 til this point) If I tell
the system that there is something less than 256MB, for instance 0x0C000000
of RAM, the system boots and works fine. Could it be trying to use an extra
BAT?
Any ideas?
Note: This is based on the EST8260 embedded boot which passes in a bd_info
structure that contains the memory size.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-09-10 3:32 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-09-10 3:32 8260 w/256MB RAM problem Allen Curtis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).