From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Dan Jankins" <DJankins@communica.com>
To: <linuxppc-embedded@lists.linuxppc.org>
Subject: MP8240 UART
Date: Mon, 27 Nov 2000 15:09:40 -0500
Message-ID: <NEBBKDMDALNLPJILFLLOCEBFCAAA.DJankins@communica.com>
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Sender: owner-linuxppc-embedded@lists.linuxppc.org
List-Id: <linuxppc-embedded@lists.linuxppc.org>


Hi All,  I am a new to PowerPC.  I have downloaded the Sandpoint Doc’s
including Schematic.  I the Unity X4 schematic  (page 9) has reference to a
UART (SOUT1, SIN1, RTS1, CTS1) but the MP8240 Data sheet status these line
are PCI clock.

Is there a UART in the MP8240?  If so where can I find information on it.
Also does Hardhat Linux use this port?



Thank You
Daniel R Jankins

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/