microcode patch for smc1, scc3?

microcode patch for smc1, scc3?

[Yoo. Jonghoon]

Hi.
my custom board(850DE) uses smc1 for console and
scc2, scc3 for ethernet. I found that scc3 does not work
because of conflicting dpram area.
Does anybody know microcode patch relocates smc1
to some other place? I've searched motorola site but
couldn't find that.
is there exists such microcode patch? or must I change
console to smc2?

thanks in advance.

===============================================
Yoo. Jonghoon,        IPone inc.
===============================================
e-mail : yooth@ipone.co.kr
tel : 82-2-02-2222-4631
===============================================


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: microcode patch for smc1, scc3?

[SangTae Ha]

You had better use smc2 instead. I had a exact same problem with you on my early work with 850DE. Finally  I used smc2 instead in order to bring up all interfaces. It works well.
Cheers!

Regards,

SangTae Ha

----- Original Message -----
From: "Yoo. Jonghoon" <yooth@ipone.co.kr>
To: "linuxppc-embedded" <linuxppc-embedded@lists.linuxppc.org>
Sent: Friday, July 06, 2001 11:20 AM
Subject: microcode patch for smc1, scc3?


>
> Hi.
> my custom board(850DE) uses smc1 for console and
> scc2, scc3 for ethernet. I found that scc3 does not work
> because of conflicting dpram area.
> Does anybody know microcode patch relocates smc1
> to some other place? I've searched motorola site but
> couldn't find that.
> is there exists such microcode patch? or must I change
> console to smc2?
>
> thanks in advance.
>
> ===============================================
> Yoo. Jonghoon,        IPone inc.
> ===============================================
> e-mail : yooth@ipone.co.kr
> tel : 82-2-02-2222-4631
> ===============================================
>
>
>

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/