From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Sat, 21 Oct 2000 01:23:43 -0500 (CDT) From: Ramprasad Rao To: Robert E Brose II cc: linuxppc-dev@lists.linuxppc.org Subject: Re: 2.4.0-test10 & iMac video failure In-Reply-To: <20001021060725.8637.qmail@kunk.jriver.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: I just built a 2.4.0-test10 and it works fine on my iMac Rev D. On Sat, 21 Oct 2000, Robert E Brose II wrote: > > If I build a kernel from the penguinppc dev tree (as of 10-21) and > use bootx 1.2 for booting, it will not bring up the iMac > rev C mach64 properly. The bootx parameters are the same that > work fine with 2.2.17 (single,video=atyfb:vmode=17:cmode=32). If the > "no video driver" box is UNchecked, the screen goes blank on > boot and stays that way. If the box is checked I get the debug messages > but nothing after the boot exit. > > The machine continues to boot works fine via telnet. At first look > through the messages, it appeared related to the PowerBook 2.4.10 > vid bug which had been fixed so I guess that's not it... > > Any ideas? > > Bob > -- > Robert E. Brose II N0QBJ > http://www.jriver.com/~bob/ > bob@kunk.jriver.com > > ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/