From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Tue, 3 Oct 2000 13:10:42 +0200 (CEST) From: Geert Uytterhoeven To: Michael Schmitz cc: Benjamin Herrenschmidt , Michael Schmitz , linuxppc-dev@lists.linuxppc.org Subject: Re: Patch: PCI resource fixup for atyfb (was: Re: xf 4.0.1 + ati driver with rage II/rage pro) In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: On Mon, 2 Oct 2000, Michael Schmitz wrote: > > (Rage LT Pro only). In the later case, you can use a different setup for > > the LCD, do real dual-head, have a higher refresh rate for the CRT, etc.... > > Fine, but how would I do that? And how do I tell atyfb to set up two > framebuffers for the two separate screens`? By adding code to atyfb. Sorry for the short answer ;-) Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/