From: gopi@india.tejasnetworks.com
To: linuxppc-embedded@lists.linuxppc.org
Subject: mpc 8260 performance..
Date: Fri, 31 Jan 2003 08:40:49 +0000 (GMT) [thread overview]
Message-ID: <Pine.LNX.4.21.0301310840010.19268-100000@localhost.localdomain> (raw)
Hi..
We are planning to use 8260 for our embedded system. One of the
job is to do routing of around 40 interfaces, with each interface
at about 500Kbps duplex.
We are planning to run it at about 260MHz and SDRAM, say about 256KB.
Can 8260 take this load of routing without impacting the cpu usage
too much(say max around 40% usage). We can assume the MTU to be
around 1500.
Is anybody already using 8260 for a similar purpose?
Are there any studies done on this/ any pointers on the web?
thanx in advance
gopi
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next reply other threads:[~2003-01-31 8:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-01-31 8:40 gopi [this message]
2003-01-31 13:39 ` mpc 8260 performance Allen Curtis
2003-01-31 14:22 ` gopi
2003-01-31 14:33 ` Allen Curtis
2003-01-31 15:13 ` gopi
2003-01-31 15:37 ` Allen Curtis
2003-01-31 17:45 ` Dan Malek
-- strict thread matches above, loose matches on Subject: below --
2003-01-31 14:49 Steven Blakeslee
2003-01-31 14:47 ` Allen Curtis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.21.0301310840010.19268-100000@localhost.localdomain \
--to=gopi@india.tejasnetworks.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).