From mboxrd@z Thu Jan 1 00:00:00 1970 From: okorpil@fh-landshut.de Date: Thu, 1 Apr 2004 10:45:18 +0200 (CEST) Reply-To: okorpil@fh-landshut.de To: Tom Rini Cc: linuxppc-embedded@lists.linuxppc.org Subject: Re: Serial Console / Booting Linux with the PPCbug on MVME2100? In-Reply-To: <20040331170924.GL13819@smtp.west.cox.net> Message-ID: References: <20040331170924.GL13819@smtp.west.cox.net> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: BTW, I just tested modifying the images with mkbugboot, both with the vmlinux.gz and zImage.prep - will not boot image off the network. Will not boot image with RB; V (load from ROM/RAM verbose) if loaded at $10000 address either (both bugboot images). This always leads to Alignment errors, while trying to boot the zImage.prep off the net directly does not lead to errors but to a system hang. I've seen evidence on the list, that the netboot stuff works - most people seem to have problems transplanting a working configuration into Flash, but not with netbooting, therefore leading to little useful advice on this in the list. :( Hope my config from the previous post is more useful. Thanks in advance, Oliver ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/