From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mailgate.sysgo.de (ns.sysgo.de [213.68.67.98]) by ozlabs.org (Postfix) with ESMTP id D439E2BDEB for ; Thu, 28 Oct 2004 16:39:53 +1000 (EST) Date: Thu, 28 Oct 2004 08:12:27 +0200 (CEST) From: Armin Schindler Sender: acs@sysgo.com To: carolyn.j.smith@exgate.tek.com In-Reply-To: <212D7E61C1F7D511B9270002A507DE7D07AB3974@us-bv-m10.bv.tek.com> Message-ID: References: <212D7E61C1F7D511B9270002A507DE7D07AB3974@us-bv-m10.bv.tek.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Cc: linuxppc-embedded@ozlabs.org Subject: Re: Machine check in USB driver interrupt handler on 8xx board List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello Carolyn, On Wed, 27 Oct 2004 carolyn.j.smith@exgate.tek.com wrote: > Hello, > > I am porting a USB (Philips ISP116x) driver to an 8xx (852T in particular) > board. It is built into the kernel at the moment (i.e. it isn't a loadable > module) and comes up fine and gets and handles interrupts (at least 2400 of > them) while the rest of the kernel is initializing. ... > I am baffled and don't know where to look next. Any ideas / suggestions will > be gratefully received. I had a similar problem with this driver when porting it. But now it works and we use it with the kernel in our ELinOS distribution. Contact me if you are interested and I can send the driver to you. Regards, Armin Schindler SYSGO AG Am Pfaffenstein 14 D-55270 Klein-Winternheim / Germany Phone: +49 6136 9948-0 Fax : +49 6136 9948-10 armin.schindler@sysgo.com www.sysgo.com www.elinos.com