From: Kumar Gala <galak@kernel.crashing.org>
To: jdl@jdl.com
Cc: linuxppc-dev@ozlabs.org
Subject: [POWERPC] 86xx: Cleaned up platform dts files
Date: Sat, 17 Feb 2007 16:32:18 -0600 (CST) [thread overview]
Message-ID: <Pine.LNX.4.64.0702171631150.11585@localhost.localdomain> (raw)
* Removed explicit linux,phandle usage. Use references and labels now
* Removed interrupts property from openpic node
* Removed interrupt-parent property from openpic node that pointed to itself
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
Please review, I'm pretty sure the changes to the openpic node should be
ok, but wanted to run them by you.
- k
commit affa4df34f80104d5740c225b57639d1d72a7ed0
tree d03d27107b5a49f247103853eff9865037786b1b
parent ff7298ea16bc15ffbba49c36724714e033a5fc10
author Kumar Gala <galak@kernel.crashing.org> Sat, 17 Feb 2007 16:09:56 -0600
committer Kumar Gala <galak@kernel.crashing.org> Sat, 17 Feb 2007 16:09:56 -0600
arch/powerpc/boot/dts/mpc8641_hpcn.dts | 193 ++++++++++++++------------------
1 files changed, 85 insertions(+), 108 deletions(-)
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index 8c75e4e..8a4995a 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -66,7 +66,7 @@
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <2b 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
dfsrr;
};
@@ -75,7 +75,7 @@
compatible = "fsl-i2c";
reg = <3100 100>;
interrupts = <2b 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
dfsrr;
};
@@ -85,31 +85,26 @@
device_type = "mdio";
compatible = "gianfar";
reg = <24520 20>;
- linux,phandle = <24520>;
- ethernet-phy@0 {
- linux,phandle = <2452000>;
- interrupt-parent = <40000>;
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
interrupts = <4a 1>;
reg = <0>;
device_type = "ethernet-phy";
};
- ethernet-phy@1 {
- linux,phandle = <2452001>;
- interrupt-parent = <40000>;
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
interrupts = <4a 1>;
reg = <1>;
device_type = "ethernet-phy";
};
- ethernet-phy@2 {
- linux,phandle = <2452002>;
- interrupt-parent = <40000>;
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
interrupts = <4a 1>;
reg = <2>;
device_type = "ethernet-phy";
};
- ethernet-phy@3 {
- linux,phandle = <2452003>;
- interrupt-parent = <40000>;
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
interrupts = <4a 1>;
reg = <3>;
device_type = "ethernet-phy";
@@ -125,8 +120,8 @@
reg = <24000 1000>;
mac-address = [ 00 E0 0C 00 73 00 ];
interrupts = <1d 2 1e 2 22 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452000>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
};
ethernet@25000 {
@@ -138,8 +133,8 @@
reg = <25000 1000>;
mac-address = [ 00 E0 0C 00 73 01 ];
interrupts = <23 2 24 2 28 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452001>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
};
ethernet@26000 {
@@ -151,8 +146,8 @@
reg = <26000 1000>;
mac-address = [ 00 E0 0C 00 02 FD ];
interrupts = <1F 2 20 2 21 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452002>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy2>;
};
ethernet@27000 {
@@ -164,8 +159,8 @@
reg = <27000 1000>;
mac-address = [ 00 E0 0C 00 03 FD ];
interrupts = <25 2 26 2 27 2>;
- interrupt-parent = <40000>;
- phy-handle = <2452003>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy3>;
};
serial@4500 {
device_type = "serial";
@@ -173,7 +168,7 @@
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <2a 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
serial@4600 {
@@ -182,7 +177,7 @@
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <1c 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
pci@8000 {
@@ -196,103 +191,102 @@
ranges = <02000000 0 80000000 80000000 0 20000000
01000000 0 00000000 e2000000 0 00100000>;
clock-frequency = <1fca055>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
interrupts = <18 2>;
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x11 */
- 8800 0 0 1 4d0 3 2
- 8800 0 0 2 4d0 4 2
- 8800 0 0 3 4d0 5 2
- 8800 0 0 4 4d0 6 2
+ 8800 0 0 1 &i8259 3 2
+ 8800 0 0 2 &i8259 4 2
+ 8800 0 0 3 &i8259 5 2
+ 8800 0 0 4 &i8259 6 2
/* IDSEL 0x12 */
- 9000 0 0 1 4d0 4 2
- 9000 0 0 2 4d0 5 2
- 9000 0 0 3 4d0 6 2
- 9000 0 0 4 4d0 3 2
+ 9000 0 0 1 &i8259 4 2
+ 9000 0 0 2 &i8259 5 2
+ 9000 0 0 3 &i8259 6 2
+ 9000 0 0 4 &i8259 3 2
/* IDSEL 0x13 */
- 9800 0 0 1 4d0 0 0
- 9800 0 0 2 4d0 0 0
- 9800 0 0 3 4d0 0 0
- 9800 0 0 4 4d0 0 0
+ 9800 0 0 1 &i8259 0 0
+ 9800 0 0 2 &i8259 0 0
+ 9800 0 0 3 &i8259 0 0
+ 9800 0 0 4 &i8259 0 0
/* IDSEL 0x14 */
- a000 0 0 1 4d0 0 0
- a000 0 0 2 4d0 0 0
- a000 0 0 3 4d0 0 0
- a000 0 0 4 4d0 0 0
+ a000 0 0 1 &i8259 0 0
+ a000 0 0 2 &i8259 0 0
+ a000 0 0 3 &i8259 0 0
+ a000 0 0 4 &i8259 0 0
/* IDSEL 0x15 */
- a800 0 0 1 4d0 0 0
- a800 0 0 2 4d0 0 0
- a800 0 0 3 4d0 0 0
- a800 0 0 4 4d0 0 0
+ a800 0 0 1 &i8259 0 0
+ a800 0 0 2 &i8259 0 0
+ a800 0 0 3 &i8259 0 0
+ a800 0 0 4 &i8259 0 0
/* IDSEL 0x16 */
- b000 0 0 1 4d0 0 0
- b000 0 0 2 4d0 0 0
- b000 0 0 3 4d0 0 0
- b000 0 0 4 4d0 0 0
+ b000 0 0 1 &i8259 0 0
+ b000 0 0 2 &i8259 0 0
+ b000 0 0 3 &i8259 0 0
+ b000 0 0 4 &i8259 0 0
/* IDSEL 0x17 */
- b800 0 0 1 4d0 0 0
- b800 0 0 2 4d0 0 0
- b800 0 0 3 4d0 0 0
- b800 0 0 4 4d0 0 0
+ b800 0 0 1 &i8259 0 0
+ b800 0 0 2 &i8259 0 0
+ b800 0 0 3 &i8259 0 0
+ b800 0 0 4 &i8259 0 0
/* IDSEL 0x18 */
- c000 0 0 1 4d0 0 0
- c000 0 0 2 4d0 0 0
- c000 0 0 3 4d0 0 0
- c000 0 0 4 4d0 0 0
+ c000 0 0 1 &i8259 0 0
+ c000 0 0 2 &i8259 0 0
+ c000 0 0 3 &i8259 0 0
+ c000 0 0 4 &i8259 0 0
/* IDSEL 0x19 */
- c800 0 0 1 4d0 0 0
- c800 0 0 2 4d0 0 0
- c800 0 0 3 4d0 0 0
- c800 0 0 4 4d0 0 0
+ c800 0 0 1 &i8259 0 0
+ c800 0 0 2 &i8259 0 0
+ c800 0 0 3 &i8259 0 0
+ c800 0 0 4 &i8259 0 0
/* IDSEL 0x1a */
- d000 0 0 1 4d0 6 2
- d000 0 0 2 4d0 3 2
- d000 0 0 3 4d0 4 2
- d000 0 0 4 4d0 5 2
+ d000 0 0 1 &i8259 6 2
+ d000 0 0 2 &i8259 3 2
+ d000 0 0 3 &i8259 4 2
+ d000 0 0 4 &i8259 5 2
/* IDSEL 0x1b */
- d800 0 0 1 4d0 5 2
- d800 0 0 2 4d0 0 0
- d800 0 0 3 4d0 0 0
- d800 0 0 4 4d0 0 0
+ d800 0 0 1 &i8259 5 2
+ d800 0 0 2 &i8259 0 0
+ d800 0 0 3 &i8259 0 0
+ d800 0 0 4 &i8259 0 0
/* IDSEL 0x1c */
- e000 0 0 1 4d0 9 2
- e000 0 0 2 4d0 a 2
- e000 0 0 3 4d0 c 2
- e000 0 0 4 4d0 7 2
+ e000 0 0 1 &i8259 9 2
+ e000 0 0 2 &i8259 a 2
+ e000 0 0 3 &i8259 c 2
+ e000 0 0 4 &i8259 7 2
/* IDSEL 0x1d */
- e800 0 0 1 4d0 9 2
- e800 0 0 2 4d0 a 2
- e800 0 0 3 4d0 b 2
- e800 0 0 4 4d0 0 0
+ e800 0 0 1 &i8259 9 2
+ e800 0 0 2 &i8259 a 2
+ e800 0 0 3 &i8259 b 2
+ e800 0 0 4 &i8259 0 0
/* IDSEL 0x1e */
- f000 0 0 1 4d0 c 2
- f000 0 0 2 4d0 0 0
- f000 0 0 3 4d0 0 0
- f000 0 0 4 4d0 0 0
+ f000 0 0 1 &i8259 c 2
+ f000 0 0 2 &i8259 0 0
+ f000 0 0 3 &i8259 0 0
+ f000 0 0 4 &i8259 0 0
/* IDSEL 0x1f */
- f800 0 0 1 4d0 6 2
- f800 0 0 2 4d0 0 0
- f800 0 0 3 4d0 0 0
- f800 0 0 4 4d0 0 0
+ f800 0 0 1 &i8259 6 2
+ f800 0 0 2 &i8259 0 0
+ f800 0 0 3 &i8259 0 0
+ f800 0 0 4 &i8259 0 0
>;
- i8259@4d0 {
- linux,phandle = <4d0>;
+ i8259: i8259@4d0 {
clock-frequency = <0>;
interrupt-controller;
device_type = "interrupt-controller";
@@ -302,12 +296,11 @@
compatible = "chrp,iic";
big-endian;
interrupts = <49 2>;
- interrupt-parent = <40000>;
+ interrupt-parent = <&mpic>;
};
};
- pic@40000 {
- linux,phandle = <40000>;
+ mpic: pic@40000 {
clock-frequency = <0>;
interrupt-controller;
#address-cells = <0>;
@@ -316,23 +309,7 @@
built-in;
compatible = "chrp,open-pic";
device_type = "open-pic";
- big-endian;
- interrupts = <
- 10 2 11 2 12 2 13 2
- 14 2 15 2 16 2 17 2
- 18 2 19 2 1a 2 1b 2
- 1c 2 1d 2 1e 2 1f 2
- 20 2 21 2 22 2 23 2
- 24 2 25 2 26 2 27 2
- 28 2 29 2 2a 2 2b 2
- 2c 2 2d 2 2e 2 2f 2
- 30 2 31 2 32 2 33 2
- 34 2 35 2 36 2 37 2
- 38 2 39 2 2a 2 3b 2
- 3c 2 3d 2 3e 2 3f 2
- 48 1 49 2 4a 1
- >;
- interrupt-parent = <40000>;
+ big-endian;
};
};
};
next reply other threads:[~2007-02-17 22:35 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-17 22:32 Kumar Gala [this message]
2007-02-17 23:40 ` [POWERPC] 86xx: Cleaned up platform dts files David Gibson
2007-02-18 0:07 ` Jon Loeliger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.64.0702171631150.11585@localhost.localdomain \
--to=galak@kernel.crashing.org \
--cc=jdl@jdl.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox