* Please pull from 'powerpc-next' branch (for 2.6.27)
@ 2008-07-16 14:02 Kumar Gala
0 siblings, 0 replies; 3+ messages in thread
From: Kumar Gala @ 2008-07-16 14:02 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
Please pull from 'powerpc-next' branch of
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc.git powerpc-next
to receive the following updates:
Documentation/powerpc/booting-without-of.txt | 189 ++--
Documentation/powerpc/dts-bindings/fsl/cpm_qe/gpio.txt | 38
Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe/usb.txt | 53 -
Documentation/powerpc/dts-bindings/fsl/mcu-mpc8349emitx.txt | 17
Documentation/powerpc/dts-bindings/fsl/pmc.txt | 63 +
Documentation/powerpc/dts-bindings/fsl/tsec.txt | 31
Documentation/powerpc/dts-bindings/fsl/upm-nand.txt | 28
Documentation/powerpc/dts-bindings/gpio/led.txt | 15
arch/powerpc/Kconfig | 14
arch/powerpc/boot/dts/mpc7448hpc2.dts | 24
arch/powerpc/boot/dts/mpc8313erdb.dts | 241 +++--
arch/powerpc/boot/dts/mpc8610_hpcd.dts | 14
arch/powerpc/configs/mpc8610_hpcd_defconfig | 121 ++
arch/powerpc/kernel/head_fsl_booke.S | 187 +---
arch/powerpc/platforms/52xx/Kconfig | 1
arch/powerpc/platforms/82xx/ep8248e.c | 4
arch/powerpc/platforms/83xx/Kconfig | 3
arch/powerpc/platforms/83xx/Makefile | 2
arch/powerpc/platforms/83xx/mpc831x_rdb.c | 1
arch/powerpc/platforms/83xx/mpc832x_mds.c | 1
arch/powerpc/platforms/83xx/mpc832x_rdb.c | 1
arch/powerpc/platforms/83xx/mpc834x_itx.c | 1
arch/powerpc/platforms/83xx/mpc834x_mds.c | 1
arch/powerpc/platforms/83xx/mpc836x_mds.c | 1
arch/powerpc/platforms/83xx/mpc836x_rdk.c | 1
arch/powerpc/platforms/83xx/mpc837x_mds.c | 1
arch/powerpc/platforms/83xx/mpc837x_rdb.c | 1
arch/powerpc/platforms/83xx/mpc83xx.h | 5
arch/powerpc/platforms/83xx/pci.c | 91 --
arch/powerpc/platforms/83xx/sbc834x.c | 1
arch/powerpc/platforms/83xx/suspend-asm.S | 533 ++++++++++++
arch/powerpc/platforms/83xx/suspend.c | 388 ++++++++
arch/powerpc/platforms/83xx/usb.c | 24
arch/powerpc/platforms/85xx/Kconfig | 3
arch/powerpc/platforms/85xx/mpc85xx_ds.c | 2
arch/powerpc/platforms/86xx/Kconfig | 3
arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 87 -
arch/powerpc/platforms/86xx/mpc86xx_hpcn.c | 2
arch/powerpc/platforms/Kconfig | 6
arch/powerpc/platforms/Kconfig.cputype | 2
arch/powerpc/platforms/fsl_uli1575.c | 117 ++
arch/powerpc/platforms/iseries/Kconfig | 1
arch/powerpc/platforms/ps3/Kconfig | 1
arch/powerpc/platforms/pseries/Kconfig | 1
arch/powerpc/sysdev/fsl_pci.c | 61 +
arch/powerpc/sysdev/fsl_pci.h | 1
arch/powerpc/sysdev/fsl_soc.c | 90 --
arch/powerpc/sysdev/fsl_soc.h | 1
arch/powerpc/sysdev/ipic.c | 71 +
arch/powerpc/sysdev/qe_lib/qe.c | 6
arch/powerpc/sysdev/qe_lib/ucc.c | 6
arch/powerpc/sysdev/qe_lib/ucc_fast.c | 16
drivers/net/fs_enet/Makefile | 5
drivers/net/fs_enet/fs_enet-main.c | 310 ------
drivers/net/fs_enet/fs_enet.h | 4
drivers/net/fs_enet/mac-fcc.c | 67 -
drivers/net/fs_enet/mac-fec.c | 23
drivers/net/fs_enet/mac-scc.c | 37
drivers/net/fs_enet/mii-bitbang.c | 107 --
drivers/net/fs_enet/mii-fec.c | 144 ---
drivers/net/gianfar.c | 118 ++
drivers/net/gianfar.h | 12
drivers/net/gianfar_ethtool.c | 41
include/asm-powerpc/pgtable-ppc32.h | 15
include/asm-powerpc/reg.h | 4
include/asm-powerpc/ucc_fast.h | 8
include/linux/fs_enet_pd.h | 4
include/linux/fsl_devices.h | 7
68 files changed, 2142 insertions(+), 1337 deletions(-)
Andy Fleming (2):
powerpc: Add support for multiple gfar mdio interfaces
powerpc: Fix a bunch of sparse warnings in the qe_lib
Anton Vorontsov (6):
powerpc/83xx: fix ULPI setup for MPC8315 processors
powerpc/fsl_soc: gianfar: don't probe disabled devices
powerpc: add FHCI USB, FSL MCU, FSL UPM and GPIO LEDs bindings
powerpc/fsl_uli1575: fix RTC quirk to work on MPC8572DS and MPC8610HPCD
powerpc/85xx/86xx: some refactoring for fsl_uli1575 code
powerpc/86xx: mpc8610_hpcd - add support for ULI RTC
Jochen Friedrich (1):
powerpc: Add documentation for CPM GPIO banks
John Rigby (2):
powerpc: pci config cleanup
powerpc: Move mpc83xx_add_bridge to fsl_pci.c
Kumar Gala (5):
fs_enet: Remove !CONFIG_PPC_CPM_NEW_BINDING code
powerpc: Remove Kconfig PPC_CPM_NEW_BINDING
powerpc: rework FSL Book-E PTE access and TLB miss
powerpc/fsl: Minor TLBSYNC cleanup for FSL Book-E
powerpc/ep8248e: Fix compile problem if !CONFIG_FS_ENET
Paul Gortmaker (1):
powerpc/mpc7448: add alias list to DTS, clean out old chosen node
Scott Wood (6):
powerpc: Document Freescale power management nodes, and the sleep property.
powerpc: Update example SOC node in booting-without-of.txt.
powerpc/mpc83xx: Power Management support
powerpc/mpc8313erdb: Add power management to the device tree.
gianfar: Add magic packet and suspend/resume support.
Add fsl,magic-packet to, and clean up, the gianfar binding.
^ permalink raw reply [flat|nested] 3+ messages in thread
* Please pull from 'powerpc-next' branch (for 2.6.27)
@ 2008-07-28 12:54 Kumar Gala
2008-07-28 13:50 ` Please pull from 'powerpc-next' branch (for 2.6.27)(updated) Kumar Gala
0 siblings, 1 reply; 3+ messages in thread
From: Kumar Gala @ 2008-07-28 12:54 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
Please pull from 'powerpc-next' branch of
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc.git powerpc-next
to receive the following updates:
Sorry for taking so long on these. Being at OLS limited patch applying
ability last week. These are some CPM related patches that have been on
the list for some time and a fix to the RTC cmos detection need for the
mpc8610ds board.
- k
Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt | 11
arch/powerpc/platforms/8xx/Kconfig | 10
arch/powerpc/platforms/Kconfig | 2
arch/powerpc/sysdev/cpm1.c | 267 ++++++++++++++-
arch/powerpc/sysdev/cpm2.c | 11
arch/powerpc/sysdev/cpm_common.c | 123 ++++++
arch/powerpc/sysdev/rtc_cmos_setup.c | 23 -
drivers/serial/cpm_uart/cpm_uart.h | 11
drivers/serial/cpm_uart/cpm_uart_core.c | 66 +++
include/asm-powerpc/cpm.h | 3
10 files changed, 506 insertions(+), 21 deletions(-)
Anton Vorontsov (1):
powerpc: rtc_cmos_setup: assign interrupts only if there is i8259 PIC
Jochen Friedrich (1):
powerpc: implement GPIO LIB API on CPM1 Freescale SoC.
Laurent Pinchart (3):
cpm2: Implement GPIO LIB API on CPM2 Freescale SoC.
cpm_uart: Modem control lines support
cpm_uart: Add generic clock API support to set baudrates
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Please pull from 'powerpc-next' branch (for 2.6.27)(updated)
2008-07-28 12:54 Please pull from 'powerpc-next' branch (for 2.6.27) Kumar Gala
@ 2008-07-28 13:50 ` Kumar Gala
0 siblings, 0 replies; 3+ messages in thread
From: Kumar Gala @ 2008-07-28 13:50 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: linuxppc-dev
Please pull from 'powerpc-next' branch of
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc.git powerpc-next
Laurent informed me I missed one CPM related patch:
'cpm2: Rework baud rate generators configuration to support external
clocks.'
- k
to receive the following updates:
Documentation/powerpc/dts-bindings/fsl/cpm_qe/serial.txt | 11
arch/powerpc/platforms/8xx/Kconfig | 10
arch/powerpc/platforms/Kconfig | 3
arch/powerpc/sysdev/cpm1.c | 267 ++++++++++++++-
arch/powerpc/sysdev/cpm2.c | 45 --
arch/powerpc/sysdev/cpm_common.c | 123 ++++++
arch/powerpc/sysdev/rtc_cmos_setup.c | 23 -
drivers/serial/cpm_uart/cpm_uart.h | 11
drivers/serial/cpm_uart/cpm_uart_core.c | 66 +++
include/asm-powerpc/cpm.h | 3
include/asm-powerpc/cpm2.h | 46 +-
11 files changed, 544 insertions(+), 64 deletions(-)
Anton Vorontsov (1):
powerpc: rtc_cmos_setup: assign interrupts only if there is i8259 PIC
Jochen Friedrich (1):
powerpc: implement GPIO LIB API on CPM1 Freescale SoC.
Laurent Pinchart (4):
cpm2: Implement GPIO LIB API on CPM2 Freescale SoC.
cpm_uart: Modem control lines support
cpm_uart: Add generic clock API support to set baudrates
cpm2: Rework baud rate generators configuration to support external clocks.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-07-28 13:50 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-07-28 12:54 Please pull from 'powerpc-next' branch (for 2.6.27) Kumar Gala
2008-07-28 13:50 ` Please pull from 'powerpc-next' branch (for 2.6.27)(updated) Kumar Gala
-- strict thread matches above, loose matches on Subject: below --
2008-07-16 14:02 Please pull from 'powerpc-next' branch (for 2.6.27) Kumar Gala
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).