Please pull from 'next' branch (2.6.29)

Please pull from 'next' branch (2.6.29)

[Kumar Gala]

Please pull from 'next' branch of

(this is my last pull request of 'next' for 2.6.29.  I would like to see
the 'powerpc: Unify opcode definitions and support' patch go in but leave
that for you to pull in directly).

	master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc.git next

to receive the following updates:

 arch/powerpc/Kconfig                           |   18 +
 arch/powerpc/boot/dts/mpc8315erdb.dts          |   68 ++++++
 arch/powerpc/boot/dts/mpc8377_mds.dts          |   64 ++++++
 arch/powerpc/boot/dts/mpc8377_rdb.dts          |   64 ++++++
 arch/powerpc/boot/dts/mpc8378_mds.dts          |   64 ++++++
 arch/powerpc/boot/dts/mpc8378_rdb.dts          |   64 ++++++
 arch/powerpc/include/asm/reg_booke.h           |    1
 arch/powerpc/kernel/Makefile                   |    1
 arch/powerpc/kernel/cpu_setup_fsl_booke.S      |   31 +++
 arch/powerpc/kernel/cputable.c                 |    8
 arch/powerpc/kernel/head_booke.h               |    6
 arch/powerpc/kernel/head_fsl_booke.S           |   85 +++++---
 arch/powerpc/mm/fsl_booke_mmu.c                |   93 ++++-----
 arch/powerpc/platforms/83xx/Makefile           |    1
 arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c |  209 +++++++++++++++++++++
 arch/powerpc/platforms/83xx/mpc831x_rdb.c      |    2
 arch/powerpc/platforms/83xx/mpc837x_mds.c      |   10 -
 arch/powerpc/platforms/83xx/mpc837x_rdb.c      |    2
 arch/powerpc/platforms/Kconfig                 |   11 +
 arch/powerpc/sysdev/fsl_pci.c                  |  244 ++++++++++++++++++++++---
 drivers/i2c/chips/Kconfig                      |   11 -
 drivers/i2c/chips/Makefile                     |    1
 drivers/i2c/chips/mcu_mpc8349emitx.c           |  209 ---------------------
 include/linux/pci_ids.h                        |    8
 24 files changed, 941 insertions(+), 334 deletions(-)

Anton Vorontsov (4):
      powerpc/fsl_pci: Add MPC83xx PCI-E controller RC mode support
      powerpc/83xx: Add PCI-E support for all MPC83xx boards with PCI-E
      powerpc/83xx: Make serial ports work on MPC8315E-RDB w/ FSL U-Boots
      powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/

Kumar Gala (2):
      powerpc/fsl-booke: Cleanup init/exception setup to be runtime
      powerpc/e500mc: Doorbells need to be taken w/exceptions disabled

Trent Piepho (3):
      powerpc/fsl-booke: Remove code duplication in lowmem mapping
      powerpc/fsl-booke: Allow larger CAM sizes than 256 MB
      powerpc/fsl-booke: Make CAM entries used for lowmem configurable

Re: Please pull from 'next' branch (2.6.29)

[Benjamin Herrenschmidt]

On Tue, 2009-01-13 at 09:21 -0600, Kumar Gala wrote:
> Please pull from 'next' branch of
> 
> (this is my last pull request of 'next' for 2.6.29.  I would like to see
> the 'powerpc: Unify opcode definitions and support' patch go in but leave
> that for you to pull in directly).

This is really very very very late for these changes, most of them
aren't bug fixes at all...

> 	master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc.git next
> 
> to receive the following updates:
> 
>  arch/powerpc/Kconfig                           |   18 +
>  arch/powerpc/boot/dts/mpc8315erdb.dts          |   68 ++++++
>  arch/powerpc/boot/dts/mpc8377_mds.dts          |   64 ++++++
>  arch/powerpc/boot/dts/mpc8377_rdb.dts          |   64 ++++++
>  arch/powerpc/boot/dts/mpc8378_mds.dts          |   64 ++++++
>  arch/powerpc/boot/dts/mpc8378_rdb.dts          |   64 ++++++
>  arch/powerpc/include/asm/reg_booke.h           |    1
>  arch/powerpc/kernel/Makefile                   |    1
>  arch/powerpc/kernel/cpu_setup_fsl_booke.S      |   31 +++
>  arch/powerpc/kernel/cputable.c                 |    8
>  arch/powerpc/kernel/head_booke.h               |    6
>  arch/powerpc/kernel/head_fsl_booke.S           |   85 +++++---
>  arch/powerpc/mm/fsl_booke_mmu.c                |   93 ++++-----
>  arch/powerpc/platforms/83xx/Makefile           |    1
>  arch/powerpc/platforms/83xx/mcu_mpc8349emitx.c |  209 +++++++++++++++++++++
>  arch/powerpc/platforms/83xx/mpc831x_rdb.c      |    2
>  arch/powerpc/platforms/83xx/mpc837x_mds.c      |   10 -
>  arch/powerpc/platforms/83xx/mpc837x_rdb.c      |    2
>  arch/powerpc/platforms/Kconfig                 |   11 +
>  arch/powerpc/sysdev/fsl_pci.c                  |  244 ++++++++++++++++++++++---
>  drivers/i2c/chips/Kconfig                      |   11 -
>  drivers/i2c/chips/Makefile                     |    1
>  drivers/i2c/chips/mcu_mpc8349emitx.c           |  209 ---------------------
>  include/linux/pci_ids.h                        |    8
>  24 files changed, 941 insertions(+), 334 deletions(-)
> 
> Anton Vorontsov (4):
>       powerpc/fsl_pci: Add MPC83xx PCI-E controller RC mode support
>       powerpc/83xx: Add PCI-E support for all MPC83xx boards with PCI-E
>       powerpc/83xx: Make serial ports work on MPC8315E-RDB w/ FSL U-Boots
>       powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/
> 
> Kumar Gala (2):
>       powerpc/fsl-booke: Cleanup init/exception setup to be runtime
>       powerpc/e500mc: Doorbells need to be taken w/exceptions disabled
> 
> Trent Piepho (3):
>       powerpc/fsl-booke: Remove code duplication in lowmem mapping
>       powerpc/fsl-booke: Allow larger CAM sizes than 256 MB
>       powerpc/fsl-booke: Make CAM entries used for lowmem configurable

Re: Please pull from 'next' branch (2.6.29)

[Kumar Gala]

On Jan 13, 2009, at 2:59 PM, Benjamin Herrenschmidt wrote:

> On Tue, 2009-01-13 at 09:21 -0600, Kumar Gala wrote:
>> Please pull from 'next' branch of
>>
>> (this is my last pull request of 'next' for 2.6.29.  I would like  
>> to see
>> the 'powerpc: Unify opcode definitions and support' patch go in but  
>> leave
>> that for you to pull in directly).
>
> This is really very very very late for these changes, most of them
> aren't bug fixes at all...

True.

>> Anton Vorontsov (4):
>>      powerpc/fsl_pci: Add MPC83xx PCI-E controller RC mode support
>>      powerpc/83xx: Add PCI-E support for all MPC83xx boards with  
>> PCI-E

Would like to see this feature added into .29

>>      powerpc/83xx: Make serial ports work on MPC8315E-RDB w/ FSL U- 
>> Boots

A sort of bug fix.

>>      powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/ 
>> chips/

At Jean's request to move i2c clients out of drivers/i2c.

>> Kumar Gala (2):
>>      powerpc/fsl-booke: Cleanup init/exception setup to be runtime
>>      powerpc/e500mc: Doorbells need to be taken w/exceptions disabled

can wait for .30

>> Trent Piepho (3):
>>      powerpc/fsl-booke: Remove code duplication in lowmem mapping
>>      powerpc/fsl-booke: Allow larger CAM sizes than 256 MB
>>      powerpc/fsl-booke: Make CAM entries used for lowmem configurable

Posted we'll before.. finally got around to reviewing them.. but can  
wait for .30

So the real question I have is when does your next branch start  
queuing up changes for .30?

I can completely live w/these not going into .29 if they can go into  
your next branch for .30

- k

Re: Please pull from 'next' branch (2.6.29)

[Kumar Gala]

On Jan 13, 2009, at 3:17 PM, Kumar Gala wrote:

>>>
>>>     powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/ 
>>> chips/
>
> At Jean's request to move i2c clients out of drivers/i2c.

Getting this into .29 might be useful since its just a driver move and  
saves us merge headache's later.

- k

Re: Please pull from 'next' branch (2.6.29)

[Benjamin Herrenschmidt]

On Tue, 2009-01-13 at 15:17 -0600, Kumar Gala wrote:
> On Jan 13, 2009, at 2:59 PM, Benjamin Herrenschmidt wrote:
> 
> > On Tue, 2009-01-13 at 09:21 -0600, Kumar Gala wrote:
> >> Please pull from 'next' branch of
> >>
> >> (this is my last pull request of 'next' for 2.6.29.  I would like  
> >> to see
> >> the 'powerpc: Unify opcode definitions and support' patch go in but  
> >> leave
> >> that for you to pull in directly).
> >
> > This is really very very very late for these changes, most of them
> > aren't bug fixes at all...
> 
> True.
> 
> >> Anton Vorontsov (4):
> >>      powerpc/fsl_pci: Add MPC83xx PCI-E controller RC mode support
> >>      powerpc/83xx: Add PCI-E support for all MPC83xx boards with  
> >> PCI-E
> 
> Would like to see this feature added into .29

Can you either rebase with just that (and bug fixes) ? Or stick that in
another branch ?

> >>      powerpc/83xx: Make serial ports work on MPC8315E-RDB w/ FSL U- 
> >> Boots
> 
> A sort of bug fix.

Ok.

> >>      powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/ 
> >> chips/
> 
> At Jean's request to move i2c clients out of drivers/i2c.

Ok.

> >> Kumar Gala (2):
> >>      powerpc/fsl-booke: Cleanup init/exception setup to be runtime
> >>      powerpc/e500mc: Doorbells need to be taken w/exceptions disabled
> 
> can wait for .30

Isn't the second one a clear bug fix ?

> >> Trent Piepho (3):
> >>      powerpc/fsl-booke: Remove code duplication in lowmem mapping
> >>      powerpc/fsl-booke: Allow larger CAM sizes than 256 MB
> >>      powerpc/fsl-booke: Make CAM entries used for lowmem configurable
> 
> Posted we'll before.. finally got around to reviewing them.. but can  
> wait for .30
> 
> So the real question I have is when does your next branch start  
> queuing up changes for .30?

Soon :-)

> I can completely live w/these not going into .29 if they can go into  
> your next branch for .30

Cheers,
Ben.