* XPC850SR atm help
@ 2003-03-26 16:53 li
0 siblings, 0 replies; only message in thread
From: li @ 2003-03-26 16:53 UTC (permalink / raw)
To: linuxppc-embedded
Hi all,
I experienced atm native PVC connection based on XPC850SR board and ppc linux kernel 2.4.4(downloaded from DENX).
First of all, i modified mpc860sar atm driver to fit for my board, and use atm-0.79.ppc to perform data transmit and receive.
Now, with two such board connect each other, i use
aread 0.0.1 on board A, and use awrite 0.0.1 hello on board B. From the driver code output, i know that board A has send out the cell, and board B has received the cell, but the received cell with the channel num is 0 so it is treated as a raw cell, so aread will not get the data.
But if i use the aread command in a pc with an ATM interface card, the board B can receive the data correctly!
I think there still may be some code about send cell need to be changed for XPC850SR, but where is it?
Any advice will be appreciated!
Regards
Li
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-03-26 16:53 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-03-26 16:53 XPC850SR atm help li
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).