RE: MKLinux on Performa 6200

[Gary Thomas <gdt@linuxppc.org>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=us-ascii, Size: 5757 bytes --]



On 17-Feb-99 marcos otero garcia wrote:
> My Questions:
> Does the Installatin not run because of the MK Linux Booter v1.4? What about other Booters
> Do I have a chance on running Linux on the Performa 6200?
> What about alternative System?

Terribly sorry, but at this point there is no Linux (of any type) available
for that machine.  I have one myself and it just sits here, unused :-(

On 17-Feb-99 marcos otero garcia wrote:
> 
> Hey,
> 
> my name is Marcos I´m mailing from Luebeck-Germany.
> 
> I tried to install MK Linux DR3 on a Macintosh Performa 6200. I´ve read in the ReadMe and in the faqomatic of the
> darmouth university that the Performa 6200 is not supported to run with MKLinux. I´ve asked me if its a problem of
> the less SCSI HD´s and wrote a mail to covile@apple.com. This Adress I have found in the faqomatic. I gotn´t a reply
> yet.
> 
> So I tried it my way. I connected an Quantum 1GB xternal SCSI HD, made a swap Partition and one filesystem-partition,
> copied the extensions, controll panles etc. and restarted my older Performa.
> The Mac comes up and started Linux
> 
> "--- Sorry you need to upgrade your this MKLinux Booter to boot OSF MK Kernel. ---"
> 
> I want to run the Performa as a DialIn webserver/like an intranetsever where friends and customers can Dial dircetly
> in and get information about me. Maybe it will be posibble to access it from the internet using the Network and
> Backbone of the local ComputerClub "ON" .
> I tried to configure it on MacOS but the tools are not very functionally and under System 8.5 not fast except using
> AppleShare IP or Mac OS X Server. But these tools are to expensive for a student - like me, and without one of these
> I can´t configure an PPP DialIn (to the Performa) connection.
> Many friends got me on Linux. I´ve found MKLinux for Macintosh or PPC based systems.
> 
> Now im have spent many time on configurating this server. And I don´t need an AppleTalk Server to print or backup my
> Data. The only use I have for it to try it for an webserver. I´ve spent many money on a good LinuxBook and bought an
> xternal SCSICase for the HD because the Performa got no internal SCSI. In the article i´ve read about unsupported
> IDE-controllers.
> and i want to run a Linux System or another good Server on my older Performa. Currently I´m working on a G3 Yosemite.
> 
> My Questions:
> Does the Installatin not run because of the MK Linux Booter v1.4? What about other Booters
> Do I have a chance on running Linux on the Performa 6200?
> What about alternative System?
> 
> I´ve looked in several mailinglist etc. but nothing found
> 
> Here the Screen as it appears when trying to install Linux
> ----------------------------------------------------------------------------------------------------------------------
> -----------------
> 
> Mach3.0  VERSION(PMK1.1): gilbert <osfmk> Wed Jun 10 17:45:07 PDT 1998; mach_kernel/PRODUKTION (venus.apple.com)
> 
> Sorry! You need to upgrade your MKLinux Booter to boot this OSF MK kernel.
> (it can be found in your MacOS Systemfolder: Extensions Folder)
> Mach Microkernel is booting on a Power Macintosh Performa (unsupported) class machine
> mem_size = 64M
> vm_page_bootstrap: 15328 free Pages
> panic: Unsupported class for Interrupt dispatcher
> 
> No debugger configured - dumping debug information
> 
> version string : Mach3.0  VERSION(PMK1.1): gilbert <osfmk> Wed Jun 10 17:45:07 PDT 1998; mach_kernel/PRODUKTION
> (venus.apple.com)
> 
> backtrace: 0025f31c 00212454 00268874 0026b0e8 0025efc4 00226e04 0025ecec 0025e3d4
> 
> please report the above messages to
> bugs@mklinux.apple.com and reboot your machine
> 
> ----------------------------------------------------------------------------------------------------------------------
> ---------------------
> Technical Spec of "my"Performa 6200
> 
> PowerPC 603 CPU with 75MHZ
> 64 MD SIMM RAM
> running under System 8.5
> using an 4GB internal IDE Seagate with MacOs System HFS-Standard (HDT Driver)
> and an xternal 1GB Quantum 1080 S Empire for Linux (700 for filesystem, 64 MB for swap) and MacOS (250MB partition
> for System and other LINUXinstaller files)
> 
> an Asante Maccon 10BaseT CommSlotI EthernetAdapter
> 
> for more information - I think you have a datasheet about all Mac Modells. If not mail me
> ----------------------------------------------------------------------------------------------------------------------
> --------------------
> 
> Please help me. Now I´m over two days reading books preparing the Hardware, surfing the web for Info.
> I´´ve Spent 350DM (will be about 150 EUR) on HardWare and Books. My girlfriend says that I´m getting silly.
> There must be a way to use this performa as a good Server with Linux.
> Hardware with the same manufacturing date is supported too and Linux runs on cheap PC System´s for less then 1000 DM
> (maybe 500 EUR).
> 
> 
> 
> If there is no way to run Linux on the Performa 6200 tell me what to do with the machine!
> 
> 
> Please excuse my bad english. I hope I get an answer. 
> 
> Thanks for interest and help...
> 
> now I´m exhausted - I will go to bed
> 
> 
> cu
> 
> 
> [[ This message was sent via the linuxppc-user mailing list. Replies are ]]
> [[ not forced back to the list, so be sure to  Cc linuxppc-user  if your ]]
> [[ reply is of general interest. To unsubscribe from linuxppc-user, send ]]
> [[ the message 'unsubscribe' to linuxppc-user-request@lists.linuxppc.org ]]


[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to  Cc linuxppc-dev  if your ]]
[[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]]
[[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]]