linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Paul Mackerras <paulus@ozlabs.org>
To: linuxppc-dev@ozlabs.org
Subject: [PATCH 08/11] powerpc/microwatt: Add microwatt_defconfig
Date: Tue, 15 Jun 2021 09:02:40 +1000	[thread overview]
Message-ID: <YMfgEPrZDqqxTHgT@thinks.paulus.ozlabs.org> (raw)
In-Reply-To: <YMfeswgEHeXSLOUF@thinks.paulus.ozlabs.org>

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
---
 arch/powerpc/configs/microwatt_defconfig | 98 ++++++++++++++++++++++++
 1 file changed, 98 insertions(+)
 create mode 100644 arch/powerpc/configs/microwatt_defconfig

diff --git a/arch/powerpc/configs/microwatt_defconfig b/arch/powerpc/configs/microwatt_defconfig
new file mode 100644
index 000000000000..a08b739123da
--- /dev/null
+++ b/arch/powerpc/configs/microwatt_defconfig
@@ -0,0 +1,98 @@
+# CONFIG_SWAP is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB_MERGE_DEFAULT is not set
+CONFIG_PPC64=y
+# CONFIG_PPC_KUEP is not set
+# CONFIG_PPC_KUAP is not set
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_NR_IRQS=64
+CONFIG_PANIC_TIMEOUT=10
+# CONFIG_PPC_POWERNV is not set
+# CONFIG_PPC_PSERIES is not set
+CONFIG_PPC_MICROWATT=y
+# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
+CONFIG_CPU_FREQ=y
+CONFIG_HZ_100=y
+# CONFIG_PPC_MEM_KEYS is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_MQ_IOSCHED_KYBER is not set
+# CONFIG_COREDUMP is not set
+# CONFIG_COMPACTION is not set
+# CONFIG_MIGRATION is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=y
+CONFIG_INET=y
+CONFIG_INET_UDP_DIAG=y
+CONFIG_INET_RAW_DIAG=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_ALLOW_DEV_COREDUMP is not set
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_PARTITIONED_MASTER=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_NETDEVICES=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_NVRAM is not set
+CONFIG_RANDOM_TRUST_CPU=y
+CONFIG_SPI=y
+CONFIG_SPI_DEBUG=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_SPIDEV=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_VIRTIO_MENU is not set
+# CONFIG_IOMMU_SUPPORT is not set
+# CONFIG_NVMEM is not set
+CONFIG_EXT4_FS=y
+# CONFIG_FILE_LOCKING is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_IA64 is not set
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_SPARC is not set
+CONFIG_PRINTK_TIME=y
+# CONFIG_SYMBOLIC_ERRNAME is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MISC is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_FTRACE is not set
+# CONFIG_STRICT_DEVMEM is not set
+CONFIG_PPC_DISABLE_WERROR=y
+CONFIG_XMON=y
+CONFIG_XMON_DEFAULT=y
+# CONFIG_XMON_DEFAULT_RO_MODE is not set
+# CONFIG_RUNTIME_TESTING_MENU is not set
-- 
2.31.1


  parent reply	other threads:[~2021-06-14 23:06 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-14 22:56 [PATCH 00/11] powerpc: Add support for Microwatt soft-core Paul Mackerras
2021-06-14 22:57 ` [PATCH 01/11] powerpc: Add Microwatt platform Paul Mackerras
2021-06-16 18:40   ` Segher Boessenkool
2021-06-16 22:24     ` Paul Mackerras
2021-06-14 22:58 ` [PATCH 02/11] powerpc: Add Microwatt device tree Paul Mackerras
2021-06-17  4:41   ` Michael Ellerman
2021-06-18  2:58     ` Paul Mackerras
2021-06-14 22:59 ` [PATCH 03/11] powerpc/radix: Add support for microwatt's PRTBL SPR Paul Mackerras
2021-06-15  1:12   ` Nicholas Piggin
2021-06-14 23:00 ` [PATCH 04/11] powerpc/microwatt: Populate platform bus from device-tree Paul Mackerras
2021-06-14 23:00 ` [PATCH 05/11] powerpc/xics: Add a native ICS backend for microwatt Paul Mackerras
2021-06-14 23:01 ` [PATCH 06/11] powerpc: microwatt: Use standard 16550 UART for console Paul Mackerras
2021-06-16 20:42   ` Segher Boessenkool
2021-06-14 23:02 ` [PATCH 07/11] powerpc: Add support for microwatt's hardware random number generator Paul Mackerras
2021-06-15  1:40   ` Nicholas Piggin
2021-06-16 13:16     ` Michael Ellerman
2021-06-16 22:22       ` Paul Mackerras
2021-06-14 23:02 ` Paul Mackerras [this message]
2021-06-14 23:03 ` [PATCH 10/11] powerpc/microwatt: Add a boot wrapper for Microwatt Paul Mackerras
2021-06-14 23:04 ` [PATCH 09/11] powerpc: boot: Fixup device-tree on little endian Paul Mackerras
2021-06-14 23:05 ` [PATCH 11/11] powerpc/microwatt: Disable interrupts in boot wrapper main program Paul Mackerras
2021-06-15  1:21   ` Nicholas Piggin
2021-06-16 23:37   ` Segher Boessenkool
2021-06-17  1:40     ` Nicholas Piggin
2021-06-17  4:06       ` Michael Ellerman
2021-06-17 16:54       ` Segher Boessenkool

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YMfgEPrZDqqxTHgT@thinks.paulus.ozlabs.org \
    --to=paulus@ozlabs.org \
    --cc=linuxppc-dev@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).