Re: [PATCH 10/19] powerpc: dts: Add MPC8314E devicetree

["J. Neuschäfer" <j.ne@posteo.net>]

On Fri, Jan 10, 2025 at 04:21:58PM +0100, Krzysztof Kozlowski wrote:
> On 02/01/2025 19:31, J. Neuschäfer via B4 Relay wrote:
> > From: "J. Neuschäfer" <j.ne@posteo.net>
> > 
> > The MPC8314E is a variant of the MPC8315E without SATA controllers.
> > 
> > Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
> > ---
> >  arch/powerpc/boot/dts/mpc8314e.dtsi | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/arch/powerpc/boot/dts/mpc8314e.dtsi b/arch/powerpc/boot/dts/mpc8314e.dtsi
> > new file mode 100644
> > index 0000000000000000000000000000000000000000..65a96a485dded5d4918d96b38778399d2f348190
> > --- /dev/null
> > +++ b/arch/powerpc/boot/dts/mpc8314e.dtsi
> > @@ -0,0 +1,7 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +// Copyright 2024 J. Neuschäfer
> > +#include "mpc8315e.dtsi"
> > +
> > +/* MPC8314E does not support SATA */
> > +/delete-node/ &sata0;
> > +/delete-node/ &sata1;
> 
> 
> You should not delete nodes. That's not really maintainable code. Either
> this is in base DTSI or it does not. If it does exist, then this delete
> is incorrect.
> 
> If it does not delete, you are not supposed to include other SoC/device
> which is not the subset of this one, so your includes are not correct.

With that in mind, I think it makes sense to structure these (up to)
four devices the other way around:

- MPC8314 as the base, because it has the least features
- MPC8314E, MPC8315E, and the currently unused MPC8315 based on MPC8314

I'll do that.

Best regards,
J. Neuschäfer