[PATCH 0/4] ibmvfc: hard reset fixes

[PATCH 0/4] ibmvfc: hard reset fixes

[Tyrel Datwyler]

This series contains a minor simplification of ibmvfc_init_sub_crqs() followed
by a couple fixes for sub-CRQ handling which effect hard reset of the
client/host adapter CRQ pair.

[PATCH 1/4] ibmvfc: simplify handling of sub-CRQ initialization

[Tyrel Datwyler]

If ibmvfc_init_sub_crqs() fails ibmvfc_probe() simply parrots
registration failure reported elsewhere, and futher
vhost->scsi_scrq.scrq == NULL is indication enough to the driver that it
has no sub-CRQs available. The mq_enabled check can also be moved into
ibmvfc_init_sub_crqs() such that each caller doesn't have to gate the
call with a mq_enabled check. Finally, in the case of sub-CRQ setup
failure setting do_enquiry can be turned off to putting the driver into
single queue fallback mode.

The aforementioned changes also simplify the next patch in the series
that fixes a hard reset issue, by tying a sub-CRQ setup failure and
do_enquiry logic into ibmvfc_init_sub_crqs().

Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 7097028d4cb6..384960036f8b 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -5705,17 +5705,21 @@ static void ibmvfc_deregister_scsi_channel(struct ibmvfc_host *vhost, int index)
 	LEAVE;
 }
 
-static int ibmvfc_init_sub_crqs(struct ibmvfc_host *vhost)
+static void ibmvfc_init_sub_crqs(struct ibmvfc_host *vhost)
 {
 	int i, j;
 
 	ENTER;
+	if (!vhost->mq_enabled)
+		return;
 
 	vhost->scsi_scrqs.scrqs = kcalloc(nr_scsi_hw_queues,
 					  sizeof(*vhost->scsi_scrqs.scrqs),
 					  GFP_KERNEL);
-	if (!vhost->scsi_scrqs.scrqs)
-		return -1;
+	if (!vhost->scsi_scrqs.scrqs) {
+		vhost->do_enquiry = 0;
+		return;
+	}
 
 	for (i = 0; i < nr_scsi_hw_queues; i++) {
 		if (ibmvfc_register_scsi_channel(vhost, i)) {
@@ -5724,13 +5728,12 @@ static int ibmvfc_init_sub_crqs(struct ibmvfc_host *vhost)
 			kfree(vhost->scsi_scrqs.scrqs);
 			vhost->scsi_scrqs.scrqs = NULL;
 			vhost->scsi_scrqs.active_queues = 0;
-			LEAVE;
-			return -1;
+			vhost->do_enquiry = 0;
+			break;
 		}
 	}
 
 	LEAVE;
-	return 0;
 }
 
 static void ibmvfc_release_sub_crqs(struct ibmvfc_host *vhost)
@@ -5997,11 +6000,7 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id)
 		goto remove_shost;
 	}
 
-	if (vhost->mq_enabled) {
-		rc = ibmvfc_init_sub_crqs(vhost);
-		if (rc)
-			dev_warn(dev, "Failed to allocate Sub-CRQs. rc=%d\n", rc);
-	}
+	ibmvfc_init_sub_crqs(vhost);
 
 	if (shost_to_fc_host(shost)->rqst_q)
 		blk_queue_max_segments(shost_to_fc_host(shost)->rqst_q, 1);
-- 
2.27.0

Re: [PATCH 1/4] ibmvfc: simplify handling of sub-CRQ initialization

[Brian King]

Reviewed-by: Brian King <brking@linux.vnet.ibm.com>


-- 
Brian King
Power Linux I/O
IBM Linux Technology Center

[PATCH 2/4] ibmvfc: fix invalid sub-CRQ handles after hard reset

[Tyrel Datwyler]

A hard reset results in a complete transport disconnect such that the
CRQ connection with the partner VIOS is broken. This has the side effect
of also invalidating the associated sub-CRQs. The current code assumes
that the sub-CRQs are perserved resulting in a protocol violation after
trying to reconnect them with the VIOS. This introduces an infinite loop
such that the VIOS forces a disconnect after each subsequent attempt to
re-register with invalid handles.

Avoid the aforementioned issue by releasing the sub-CRQs prior to CRQ
disconnect, and driving a reinitialization of the sub-CRQs once a new
CRQ is registered with the hypervisor.

fixes: faacf8c5f1d5 ("ibmvfc: add alloc/dealloc routines for SCSI Sub-CRQ Channels")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 384960036f8b..3dd20f383453 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -158,6 +158,9 @@ static void ibmvfc_npiv_logout(struct ibmvfc_host *);
 static void ibmvfc_tgt_implicit_logout_and_del(struct ibmvfc_target *);
 static void ibmvfc_tgt_move_login(struct ibmvfc_target *);
 
+static void ibmvfc_release_sub_crqs(struct ibmvfc_host *);
+static void ibmvfc_init_sub_crqs(struct ibmvfc_host *);
+
 static const char *unknown_error = "unknown error";
 
 static long h_reg_sub_crq(unsigned long unit_address, unsigned long ioba,
@@ -926,8 +929,8 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)
 	unsigned long flags;
 	struct vio_dev *vdev = to_vio_dev(vhost->dev);
 	struct ibmvfc_queue *crq = &vhost->crq;
-	struct ibmvfc_queue *scrq;
-	int i;
+
+	ibmvfc_release_sub_crqs(vhost);
 
 	/* Close the CRQ */
 	do {
@@ -947,16 +950,6 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)
 	memset(crq->msgs.crq, 0, PAGE_SIZE);
 	crq->cur = 0;
 
-	if (vhost->scsi_scrqs.scrqs) {
-		for (i = 0; i < nr_scsi_hw_queues; i++) {
-			scrq = &vhost->scsi_scrqs.scrqs[i];
-			spin_lock(scrq->q_lock);
-			memset(scrq->msgs.scrq, 0, PAGE_SIZE);
-			scrq->cur = 0;
-			spin_unlock(scrq->q_lock);
-		}
-	}
-
 	/* And re-open it again */
 	rc = plpar_hcall_norets(H_REG_CRQ, vdev->unit_address,
 				crq->msg_token, PAGE_SIZE);
@@ -966,6 +959,9 @@ static int ibmvfc_reset_crq(struct ibmvfc_host *vhost)
 		dev_warn(vhost->dev, "Partner adapter not ready\n");
 	else if (rc != 0)
 		dev_warn(vhost->dev, "Couldn't register crq (rc=%d)\n", rc);
+
+	ibmvfc_init_sub_crqs(vhost);
+
 	spin_unlock(vhost->crq.q_lock);
 	spin_unlock_irqrestore(vhost->host->host_lock, flags);
 
@@ -5692,6 +5688,7 @@ static void ibmvfc_deregister_scsi_channel(struct ibmvfc_host *vhost, int index)
 
 	free_irq(scrq->irq, scrq);
 	irq_dispose_mapping(scrq->irq);
+	scrq->irq = 0;
 
 	do {
 		rc = plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address,
-- 
2.27.0

Re: [PATCH 2/4] ibmvfc: fix invalid sub-CRQ handles after hard reset

[Brian King]

Reviewed-by: Brian King <brking@linux.vnet.ibm.com>


-- 
Brian King
Power Linux I/O
IBM Linux Technology Center

[PATCH 3/4] ibmvfc: treat H_CLOSED as success during sub-CRQ registration

[Tyrel Datwyler]

A non-zero return code for H_REG_SUB_CRQ is currently treated as a
failure resulting in failing sub-CRQ setup. The case of H_CLOSED should
not be treated as a failure. This return code translates to a successful
sub-CRQ registration by the hypervisor, and is meant to communicate back
that there is currently no partner VIOS CRQ connection established as of
yet. This is a common occurrence during a disconnect where the client
adapter can possibly come back up prior to the partner adapter.

For non-zero return code from H_REG_SUB_CRQ treat a H_CLOSED as success
so that sub-CRQs are successfully setup.

Fixes: faacf8c5f1d5 ("ibmvfc: add alloc/dealloc routines for SCSI Sub-CRQ Channels")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index 3dd20f383453..ba6fcf9cbc57 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -5636,7 +5636,8 @@ static int ibmvfc_register_scsi_channel(struct ibmvfc_host *vhost,
 	rc = h_reg_sub_crq(vdev->unit_address, scrq->msg_token, PAGE_SIZE,
 			   &scrq->cookie, &scrq->hw_irq);
 
-	if (rc) {
+	/* H_CLOSED indicates successful register, but no CRQ partner */
+	if (rc && rc != H_CLOSED) {
 		dev_warn(dev, "Error registering sub-crq: %d\n", rc);
 		if (rc == H_PARAMETER)
 			dev_warn_once(dev, "Firmware may not support MQ\n");
-- 
2.27.0

Re: [PATCH 3/4] ibmvfc: treat H_CLOSED as success during sub-CRQ registration

[Brian King]

Reviewed-by: Brian King <brking@linux.vnet.ibm.com>


-- 
Brian King
Power Linux I/O
IBM Linux Technology Center

[PATCH 4/4] ibmvfc: store return code of H_FREE_SUB_CRQ during cleanup

[Tyrel Datwyler]

The H_FREE_SUB_CRQ hypercall can return a retry delay return code that
indicates the call needs to be retried after a specific amount of time
delay. The error path to free a sub-CRQ in case of a failure during
channel registration fails to capture the return code of H_FREE_SUB_CRQ
which will result in the delay loop being skipped in the case of a retry
delay return code.

Store the return code result of the H_FREE_SUB_CRQ call such that the
return code check in the delay loop evaluates a meaningful value.

Fixes: 9288d35d70b5 ("ibmvfc: map/request irq and register Sub-CRQ interrupt handler")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
---
 drivers/scsi/ibmvscsi/ibmvfc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
index ba6fcf9cbc57..23b803ac4a13 100644
--- a/drivers/scsi/ibmvscsi/ibmvfc.c
+++ b/drivers/scsi/ibmvscsi/ibmvfc.c
@@ -5670,7 +5670,7 @@ static int ibmvfc_register_scsi_channel(struct ibmvfc_host *vhost,
 
 irq_failed:
 	do {
-		plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address, scrq->cookie);
+		rc = plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address, scrq->cookie);
 	} while (rc == H_BUSY || H_IS_LONG_BUSY(rc));
 reg_failed:
 	ibmvfc_free_queue(vhost, scrq);
-- 
2.27.0

Re: [PATCH 4/4] ibmvfc: store return code of H_FREE_SUB_CRQ during cleanup

[Brian King]

On 2/11/21 12:57 PM, Tyrel Datwyler wrote:
> diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
> index ba6fcf9cbc57..23b803ac4a13 100644
> --- a/drivers/scsi/ibmvscsi/ibmvfc.c
> +++ b/drivers/scsi/ibmvscsi/ibmvfc.c
> @@ -5670,7 +5670,7 @@ static int ibmvfc_register_scsi_channel(struct ibmvfc_host *vhost,
>  
>  irq_failed:
>  	do {
> -		plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address, scrq->cookie);
> +		rc = plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address, scrq->cookie);
>  	} while (rc == H_BUSY || H_IS_LONG_BUSY(rc));

Other places in the driver where we get a busy return code back we have an msleep(100).
Should we be doing that here as well?

Thanks,

Brian

-- 
Brian King
Power Linux I/O
IBM Linux Technology Center

Re: [PATCH 4/4] ibmvfc: store return code of H_FREE_SUB_CRQ during cleanup

[Tyrel Datwyler]

On 2/16/21 6:58 AM, Brian King wrote:
> On 2/11/21 12:57 PM, Tyrel Datwyler wrote:
>> diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c
>> index ba6fcf9cbc57..23b803ac4a13 100644
>> --- a/drivers/scsi/ibmvscsi/ibmvfc.c
>> +++ b/drivers/scsi/ibmvscsi/ibmvfc.c
>> @@ -5670,7 +5670,7 @@ static int ibmvfc_register_scsi_channel(struct ibmvfc_host *vhost,
>>  
>>  irq_failed:
>>  	do {
>> -		plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address, scrq->cookie);
>> +		rc = plpar_hcall_norets(H_FREE_SUB_CRQ, vdev->unit_address, scrq->cookie);
>>  	} while (rc == H_BUSY || H_IS_LONG_BUSY(rc));
> 
> Other places in the driver where we get a busy return code back we have an msleep(100).
> Should we be doing that here as well?

Indeed, and actually even better would be to use rtas_busy_delay() which will
perform the sleep with the correct ms delay, and marks itself with the
might_sleep() macro.

-Tyrel

> 
> Thanks,
> 
> Brian
>