From: Herbert Xu <herbert@gondor.apana.org.au>
To: Gabriel Paubert <paubert@iram.es>
Cc: kernel test robot <lkp@intel.com>,
oe-kbuild-all@lists.linux.dev,
Linux Crypto Mailing List <linux-crypto@vger.kernel.org>,
Venkat Rao Bagalkote <venkat88@linux.ibm.com>,
Madhavan Srinivasan <maddy@linux.ibm.com>,
Stephen Rothwell <sfr@canb.auug.org.au>,
Danny Tsen <dtsen@linux.ibm.com>,
linuxppc-dev@lists.ozlabs.org,
Michael Ellerman <mpe@ellerman.id.au>
Subject: [v2 PATCH] powerpc: Add gcc 128-bit shift helpers
Date: Sat, 17 May 2025 09:50:40 +0800 [thread overview]
Message-ID: <aCfrcNFYIWJruP4G@gondor.apana.org.au> (raw)
In-Reply-To: <aCccToR_71ETmPd-@lt-gp.iram.es>
On Fri, May 16, 2025 at 01:06:54PM +0200, Gabriel Paubert wrote:
>
> It won't work for big endian, nor for 32 bit obviously.
Good catch, I will restrict the Kconfig option to little-endian.
The accelerated crypto code which uses this is already restricted
to little-endian anyway.
The Kconfig option is also dependent on PPC64 so 32-bit shouldn't
be a problem.
> Besides that, in arch/power/kernel/misc_32.S, you'll find a branchless
> version of these functions. It's for 64 bit shifts on 32 bit big-endian
> but it can easily be adapted to 128 bit shifts on 64 bit processors
> (swapping r3 and r4 depending on endianness).
Nice. I've replaced the shift code with one based on misc_32.S.
> Several functions of kernel/misc_32.S should arguably be moved to lib/.
I'll leave that to someone else :)
Thanks,
---8<---
When optimising for size, gcc generates out-of-line calls for 128-bit
integer shifts. Add these functions to avoid build errors.
Also restrict ARCH_SUPPORTS_INT128 to little-endian since the only
user that prompted this poly1305 only supports that.
Fixes: c66d7ebbe2fa ("crypto: powerpc/poly1305 - Add SIMD fallback")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://urldefense.com/v3/__https://lore.kernel.org/oe-kbuild-all/202505152053.FrKekjCe-lkp@intel.com/__;!!D9dNQwwGXtA!TSuOAutxjuD3Hp-RC0Fw9dTNuagdCKeNLTN71tv_OmhUxyAPLfIfwwpZop5pKFXgS4Jfkt830_tEMkbo7rsvYg$
Suggested-by: Gabriel Paubert <paubert@iram.es>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 651e0c32957a..7a7d39fa8b01 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -173,7 +173,7 @@ config PPC
select ARCH_STACKWALK
select ARCH_SUPPORTS_ATOMIC_RMW
select ARCH_SUPPORTS_DEBUG_PAGEALLOC if PPC_BOOK3S || PPC_8xx
- select ARCH_SUPPORTS_INT128 if PPC64 && CC_HAS_INT128
+ select ARCH_SUPPORTS_INT128 if PPC64 && CC_HAS_INT128 && CPU_LITTLE_ENDIAN
select ARCH_USE_BUILTIN_BSWAP
select ARCH_USE_CMPXCHG_LOCKREF if PPC64
select ARCH_USE_MEMTEST
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 1cd74673cbf7..a41c071c1652 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -87,3 +87,5 @@ obj-$(CONFIG_CRC_T10DIF_ARCH) += crc-t10dif-powerpc.o
crc-t10dif-powerpc-y := crc-t10dif-glue.o crct10dif-vpmsum_asm.o
obj-$(CONFIG_PPC64) += $(obj64-y)
+
+obj-$(CONFIG_ARCH_SUPPORTS_INT128) += tishift.o
diff --git a/arch/powerpc/lib/tishift.S b/arch/powerpc/lib/tishift.S
new file mode 100644
index 000000000000..f63748b5e1c5
--- /dev/null
+++ b/arch/powerpc/lib/tishift.S
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
+ * and Paul Mackerras.
+ * Copyright (c) 2025 Herbert Xu <herbert@gondor.apana.org.au>
+ */
+#include <asm/ppc_asm.h>
+#include <linux/export.h>
+
+_GLOBAL(__lshrti3)
+ subfic r6,r5,64
+ srd r3,r3,r5 # LSW = count > 63 ? 0 : LSW >> count
+ addi r7,r5,-64 # could be xori, or addi with -64
+ sld r6,r4,r6 # t1 = count > 63 ? 0 : MSW << (64-count)
+ srd r7,r4,r7 # t2 = count < 64 ? 0 : MSW >> (count-64)
+ or r3,r3,r6 # LSW |= t1
+ srd r4,r4,r5 # MSW = MSW >> count
+ or r3,r3,r7 # LSW |= t2
+ blr
+EXPORT_SYMBOL(__lshrti3)
+
+_GLOBAL(__ashrti3)
+ subfic r6,r5,64
+ srd r3,r3,r5 # LSW = count > 63 ? 0 : LSW >> count
+ addi r7,r5,-64 # could be xori, or addi with -64
+ sld r6,r4,r6 # t1 = count > 63 ? 0 : MSW << (64-count)
+ rlwinm r8,r7,0,64 # t3 = (count < 64) ? 64 : 0
+ srad r7,r4,r7 # t2 = MSW >> (count-64)
+ or r3,r3,r6 # LSW |= t1
+ sld r7,r7,r8 # t2 = (count < 64) ? 0 : t2
+ srad r4,r4,r5 # MSW = MSW >> count
+ or r3,r3,r7 # LSW |= t2
+ blr
+EXPORT_SYMBOL(__ashrti3)
+
+_GLOBAL(__ashlti3)
+ subfic r6,r5,64
+ sld r4,r4,r5 # MSW = count > 64 ? 0 : MSW << count
+ addi r7,r5,-64 # could be xori, or addi with -64
+ srd r6,r3,r6 # t1 = count > 63 ? 0 : LSW >> (64-count)
+ sld r7,r3,r7 # t2 = count < 64 ? 0 : LSW << (count-64)
+ or r4,r4,r6 # MSW |= t1
+ sld r3,r3,r5 # LSW = LSW << count
+ or r4,r4,r7 # MSW |= t2
+ blr
+EXPORT_SYMBOL(__ashlti3)
--
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt
prev parent reply other threads:[~2025-05-17 1:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <202505152053.FrKekjCe-lkp@intel.com>
2025-05-16 8:46 ` [PATCH] powerpc: Add gcc 128-bit shift helpers Herbert Xu
2025-05-16 11:06 ` Gabriel Paubert
2025-05-17 1:50 ` Herbert Xu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aCfrcNFYIWJruP4G@gondor.apana.org.au \
--to=herbert@gondor.apana.org.au \
--cc=dtsen@linux.ibm.com \
--cc=linux-crypto@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=lkp@intel.com \
--cc=maddy@linux.ibm.com \
--cc=mpe@ellerman.id.au \
--cc=oe-kbuild-all@lists.linux.dev \
--cc=paubert@iram.es \
--cc=sfr@canb.auug.org.au \
--cc=venkat88@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).