[PATCH v4 0/4] ASoC: fsl_asrc: support the i.MX952 platform

[PATCH v4 0/4] ASoC: fsl_asrc: support the i.MX952 platform

[Shengjiu Wang]

Update dt binding document and update driver to suppot ASRC on i.MX952.

Changes in v4:
- add Reviewed-by from Daniel in patch 2/4, 3/4
- add Reviewed-by from Frank in patch 4/4
- update the commit message for patch 4/4
- remove 'retry' in patch 2/4, reduce the threshold for timeout.

Changes in v3:
- add Reviewed-by from Daniel in patch 1/4
- swap the patch 2/4 and patch 3/4
- use regmap_read_poll_timeout in the fsl_asrc_m2m_output_ready()
- refine the code in asrc_m2m_device_run()

Changes in v2:
- update commit message for add more infos
- split original patch 2/3 to two patches: patch 2/4 3/4
- use size_add() in patch 4/4

Shengjiu Wang (4):
  ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform
  ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M
  ASoC: fsl_asrc: Add support for i.MX952 platform
  ASoC: fsl_asrc_dma: allocate memory from dma device

 .../bindings/sound/fsl,imx-asrc.yaml          |  1 +
 sound/soc/fsl/fsl_asrc.c                      | 38 +++++++++++++++
 sound/soc/fsl/fsl_asrc.h                      | 18 +++++++
 sound/soc/fsl/fsl_asrc_common.h               |  4 ++
 sound/soc/fsl/fsl_asrc_dma.c                  | 48 ++++++++++++++++---
 sound/soc/fsl/fsl_asrc_m2m.c                  |  8 +++-
 6 files changed, 109 insertions(+), 8 deletions(-)

-- 
2.34.1

[PATCH v4 1/4] ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform

[Shengjiu Wang]

Add new compatible string 'fsl,imx952-asrc' for i.MX952 platform,
below are the differences that make this ASRC not fallback compatible
with other platforms.

1) There is a power domain on i.MX952 for the wakeupmix system where
ASRC is in. But it is enabled by default, ASRC device don't need
to enable it, so it is optional for i.MX952.
2) The clock sources of ASRC are different on i.MX952.
3) There is a limitation on i.MX952 that DMA request is not cleared at the
end of conversion with dma slave mode. Which causes sample is dropped from
the input fifo on the second time if DMA is triggered before the client
device and DMA may copy wrong data from output fifo as the output fifo is
not ready in the beginning. So there is specially handling in the driver.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
index c9152bac7421..608defc93c1e 100644
--- a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
@@ -25,6 +25,7 @@ properties:
           - fsl,imx53-asrc
           - fsl,imx8qm-asrc
           - fsl,imx8qxp-asrc
+          - fsl,imx952-asrc
       - items:
           - enum:
               - fsl,imx6sx-asrc
-- 
2.34.1

[PATCH v4 2/4] ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M

[Shengjiu Wang]

There is a limitation on i.MX952 that dma request is not cleared at the
end of conversion with dma slave mode. Which causes sample is dropped
from the input fifo on the second time if dma is triggered before the
client device and EDMA may copy wrong data from output fifo as the output
fifo is not ready in the beginning.

The solution is to trigger asrc before dma on i.MX952, and add delay to
wait output data is generated then start the EDMA for output, otherwise
the m2m function has noise issues.

So add an option to start ASRC first for M2M before ASRC is enabled on
i.MX952.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 sound/soc/fsl/fsl_asrc.c        | 22 ++++++++++++++++++++++
 sound/soc/fsl/fsl_asrc.h        |  4 ++++
 sound/soc/fsl/fsl_asrc_common.h |  4 ++++
 sound/soc/fsl/fsl_asrc_m2m.c    |  8 +++++++-
 4 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 92fb16f7be45..2fe25667c888 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -1078,6 +1078,26 @@ static unsigned int fsl_asrc_get_output_fifo_size(struct fsl_asrc_pair *pair)
 	return val >> ASRFSTi_OUTPUT_FIFO_SHIFT;
 }
 
+static bool fsl_asrc_m2m_output_ready(struct fsl_asrc_pair *pair)
+{
+	struct fsl_asrc *asrc = pair->asrc;
+	enum asrc_pair_index index = pair->index;
+	u32 val;
+	int ret;
+
+	/* Check output fifo status if it exceeds the watermark. */
+	ret = regmap_read_poll_timeout(asrc->regmap, REG_ASRFST(index), val,
+				       (ASRFSTi_OUTPUT_FIFO_FILL(val) >= ASRC_M2M_OUTPUTFIFO_WML),
+				       1, 1000);
+
+	if (ret) {
+		pair_warn("output is not ready\n");
+		return false;
+	}
+
+	return true;
+}
+
 static int fsl_asrc_m2m_prepare(struct fsl_asrc_pair *pair)
 {
 	struct fsl_asrc_pair_priv *pair_priv = pair->private;
@@ -1275,6 +1295,7 @@ static int fsl_asrc_probe(struct platform_device *pdev)
 
 	asrc_priv->soc = of_device_get_match_data(&pdev->dev);
 	asrc->use_edma = asrc_priv->soc->use_edma;
+	asrc->start_before_dma = asrc_priv->soc->start_before_dma;
 	asrc->get_dma_channel = fsl_asrc_get_dma_channel;
 	asrc->request_pair = fsl_asrc_request_pair;
 	asrc->release_pair = fsl_asrc_release_pair;
@@ -1289,6 +1310,7 @@ static int fsl_asrc_probe(struct platform_device *pdev)
 	asrc->m2m_get_maxburst = fsl_asrc_m2m_get_maxburst;
 	asrc->m2m_pair_resume = fsl_asrc_m2m_pair_resume;
 	asrc->m2m_get_cap = fsl_asrc_m2m_get_cap;
+	asrc->m2m_output_ready = fsl_asrc_m2m_output_ready;
 
 	if (of_device_is_compatible(np, "fsl,imx35-asrc")) {
 		asrc_priv->clk_map[IN] = input_clk_map_imx35;
diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
index 1c492eb237f5..60b6865ca952 100644
--- a/sound/soc/fsl/fsl_asrc.h
+++ b/sound/soc/fsl/fsl_asrc.h
@@ -257,6 +257,8 @@
 #define ASRFSTi_OUTPUT_FIFO_WIDTH	7
 #define ASRFSTi_OUTPUT_FIFO_SHIFT	12
 #define ASRFSTi_OUTPUT_FIFO_MASK	(((1 << ASRFSTi_OUTPUT_FIFO_WIDTH) - 1) << ASRFSTi_OUTPUT_FIFO_SHIFT)
+#define ASRFSTi_OUTPUT_FIFO_FILL(v)	\
+	(((v) & ASRFSTi_OUTPUT_FIFO_MASK) >> ASRFSTi_OUTPUT_FIFO_SHIFT)
 #define ASRFSTi_IAEi_SHIFT		11
 #define ASRFSTi_IAEi_MASK		(1 << ASRFSTi_IAEi_SHIFT)
 #define ASRFSTi_IAEi			(1 << ASRFSTi_IAEi_SHIFT)
@@ -432,10 +434,12 @@ struct dma_block {
  *
  * @use_edma: using edma as dma device or not
  * @channel_bits: width of ASRCNCR register for each pair
+ * @start_before_dma: start asrc before dma
  */
 struct fsl_asrc_soc_data {
 	bool use_edma;
 	unsigned int channel_bits;
+	bool start_before_dma;
 };
 
 /**
diff --git a/sound/soc/fsl/fsl_asrc_common.h b/sound/soc/fsl/fsl_asrc_common.h
index 0cd595b0f629..c8a1a2b5915d 100644
--- a/sound/soc/fsl/fsl_asrc_common.h
+++ b/sound/soc/fsl/fsl_asrc_common.h
@@ -107,6 +107,7 @@ struct fsl_asrc_pair {
  * @asrc_rate: default sample rate for ASoC Back-Ends
  * @asrc_format: default sample format for ASoC Back-Ends
  * @use_edma: edma is used
+ * @start_before_dma: start asrc before dma
  * @get_dma_channel: function pointer
  * @request_pair: function pointer
  * @release_pair: function pointer
@@ -116,6 +117,7 @@ struct fsl_asrc_pair {
  * @m2m_start: function pointer
  * @m2m_unprepare: function pointer
  * @m2m_stop: function pointer
+ * @m2m_output_ready: function pointer, check output fifo ready or not
  * @m2m_calc_out_len: function pointer
  * @m2m_get_maxburst: function pointer
  * @m2m_pair_suspend: function pointer
@@ -143,6 +145,7 @@ struct fsl_asrc {
 	int asrc_rate;
 	snd_pcm_format_t asrc_format;
 	bool use_edma;
+	bool start_before_dma;
 
 	struct dma_chan *(*get_dma_channel)(struct fsl_asrc_pair *pair, bool dir);
 	int (*request_pair)(int channels, struct fsl_asrc_pair *pair);
@@ -154,6 +157,7 @@ struct fsl_asrc {
 	int (*m2m_start)(struct fsl_asrc_pair *pair);
 	int (*m2m_unprepare)(struct fsl_asrc_pair *pair);
 	int (*m2m_stop)(struct fsl_asrc_pair *pair);
+	bool (*m2m_output_ready)(struct fsl_asrc_pair *pair);
 
 	int (*m2m_calc_out_len)(struct fsl_asrc_pair *pair, int input_buffer_length);
 	int (*m2m_get_maxburst)(u8 dir, struct fsl_asrc_pair *pair);
diff --git a/sound/soc/fsl/fsl_asrc_m2m.c b/sound/soc/fsl/fsl_asrc_m2m.c
index f46881f71e43..77999526dd9e 100644
--- a/sound/soc/fsl/fsl_asrc_m2m.c
+++ b/sound/soc/fsl/fsl_asrc_m2m.c
@@ -253,15 +253,21 @@ static int asrc_m2m_device_run(struct fsl_asrc_pair *pair, struct snd_compr_task
 	reinit_completion(&pair->complete[IN]);
 	reinit_completion(&pair->complete[OUT]);
 
+	if (asrc->start_before_dma)
+		asrc->m2m_start(pair);
+
 	/* Submit DMA request */
 	dmaengine_submit(pair->desc[IN]);
 	dma_async_issue_pending(pair->desc[IN]->chan);
 	if (out_dma_len > 0) {
+		if (asrc->start_before_dma && asrc->m2m_output_ready)
+			asrc->m2m_output_ready(pair);
 		dmaengine_submit(pair->desc[OUT]);
 		dma_async_issue_pending(pair->desc[OUT]->chan);
 	}
 
-	asrc->m2m_start(pair);
+	if (!asrc->start_before_dma)
+		asrc->m2m_start(pair);
 
 	if (!wait_for_completion_interruptible_timeout(&pair->complete[IN], 10 * HZ)) {
 		dev_err(dev, "out DMA task timeout\n");
-- 
2.34.1

[PATCH v4 3/4] ASoC: fsl_asrc: Add support for i.MX952 platform

[Shengjiu Wang]

Add a compatible string, clock mapping table and enable the option
'start_before_dma' to support ASRC on the i.MX952 platform.

The clock mapping table is to map the clock sources on i.MX952 to the
clock ids in the driver, the clock ids are for all the clock sources on
all supported platforms.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
---
 sound/soc/fsl/fsl_asrc.c | 16 ++++++++++++++++
 sound/soc/fsl/fsl_asrc.h | 14 ++++++++++++++
 2 files changed, 30 insertions(+)

diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 2fe25667c888..5fda9b647c70 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -106,6 +106,12 @@ static unsigned char clk_map_imx8qxp[2][ASRC_CLK_MAP_LEN] = {
 	},
 };
 
+static unsigned char clk_map_imx952[ASRC_CLK_MAP_LEN] = {
+	0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0x0,
+	0x0, 0x1, 0x2, 0x3, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0x4, 0x5, 0x6, 0x8, 0xf, 0xf,
+	0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0x7, 0x9, 0xa, 0xb, 0xc, 0xd, 0xf, 0xf, 0xf, 0xf,
+};
+
 /*
  * According to RM, the divider range is 1 ~ 8,
  * prescaler is power of 2 from 1 ~ 128.
@@ -1337,6 +1343,9 @@ static int fsl_asrc_probe(struct platform_device *pdev)
 			asrc_priv->clk_map[IN] = clk_map_imx8qxp[map_idx];
 			asrc_priv->clk_map[OUT] = clk_map_imx8qxp[map_idx];
 		}
+	} else if (of_device_is_compatible(np, "fsl,imx952-asrc")) {
+		asrc_priv->clk_map[IN] = clk_map_imx952;
+		asrc_priv->clk_map[OUT] = clk_map_imx952;
 	}
 
 	asrc->channel_avail = 10;
@@ -1575,11 +1584,18 @@ static const struct fsl_asrc_soc_data fsl_asrc_imx8qxp_data = {
 	.channel_bits = 4,
 };
 
+static const struct fsl_asrc_soc_data fsl_asrc_imx952_data = {
+	.use_edma = true,
+	.channel_bits = 4,
+	.start_before_dma = true,
+};
+
 static const struct of_device_id fsl_asrc_ids[] = {
 	{ .compatible = "fsl,imx35-asrc", .data = &fsl_asrc_imx35_data },
 	{ .compatible = "fsl,imx53-asrc", .data = &fsl_asrc_imx53_data },
 	{ .compatible = "fsl,imx8qm-asrc", .data = &fsl_asrc_imx8qm_data },
 	{ .compatible = "fsl,imx8qxp-asrc", .data = &fsl_asrc_imx8qxp_data },
+	{ .compatible = "fsl,imx952-asrc", .data = &fsl_asrc_imx952_data },
 	{}
 };
 MODULE_DEVICE_TABLE(of, fsl_asrc_ids);
diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
index 60b6865ca952..7a81366a0ee4 100644
--- a/sound/soc/fsl/fsl_asrc.h
+++ b/sound/soc/fsl/fsl_asrc.h
@@ -326,6 +326,13 @@ enum asrc_inclk {
 	INCLK_SAI6_TX_BCLK     = 0x22,
 	INCLK_HDMI_RX_SAI0_RX_BCLK     = 0x24,
 	INCLK_HDMI_TX_SAI0_TX_BCLK     = 0x25,
+
+	INCLK_SAI2_TX_BCLK	= 0x26,
+	INCLK_SAI3_TX_BCLK	= 0x27,
+	INCLK_SAI4_RX_BCLK	= 0x28,
+	INCLK_SAI4_TX_BCLK	= 0x29,
+	INCLK_SAI5_RX_BCLK	= 0x2a,
+	INCLK_SAI5_TX_BCLK	= 0x2b,
 };
 
 enum asrc_outclk {
@@ -366,6 +373,13 @@ enum asrc_outclk {
 	OUTCLK_SAI6_TX_BCLK     = 0x22,
 	OUTCLK_HDMI_RX_SAI0_RX_BCLK     = 0x24,
 	OUTCLK_HDMI_TX_SAI0_TX_BCLK     = 0x25,
+
+	OUTCLK_SAI2_TX_BCLK	= 0x26,
+	OUTCLK_SAI3_TX_BCLK	= 0x27,
+	OUTCLK_SAI4_RX_BCLK	= 0x28,
+	OUTCLK_SAI4_TX_BCLK	= 0x29,
+	OUTCLK_SAI5_RX_BCLK	= 0x2a,
+	OUTCLK_SAI5_TX_BCLK	= 0x2b,
 };
 
 #define ASRC_CLK_MAX_NUM	16
-- 
2.34.1

[PATCH v4 4/4] ASoC: fsl_asrc_dma: allocate memory from dma device

[Shengjiu Wang]

The dma-coherent property is used to indicate a device is capable of
coherent DMA operations. On i.MX952, one of EDMA devices support such
feature, in order to support the EDMA device, the memory needs to be
allocated from the DMA device.

Make this driver to support both non dma-coherent and dma-coherent dma
engine.

Remove dma coerce_mask_and coherent() because DMA provider already set it
according to its capability.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
---
 sound/soc/fsl/fsl_asrc_dma.c | 48 ++++++++++++++++++++++++++++++------
 1 file changed, 41 insertions(+), 7 deletions(-)

diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
index 7dacc06b2f02..348b0aabfa68 100644
--- a/sound/soc/fsl/fsl_asrc_dma.c
+++ b/sound/soc/fsl/fsl_asrc_dma.c
@@ -449,18 +449,52 @@ fsl_asrc_dma_pcm_pointer(struct snd_soc_component *component,
 static int fsl_asrc_dma_pcm_new(struct snd_soc_component *component,
 				struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_card *card = rtd->card->snd_card;
+	struct device *dev = component->dev;
+	struct fsl_asrc *asrc = dev_get_drvdata(dev);
+	struct fsl_asrc_pair *pair;
 	struct snd_pcm *pcm = rtd->pcm;
+	struct dma_chan *chan;
 	int ret;
 
-	ret = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
-	if (ret) {
-		dev_err(card->dev, "failed to set DMA mask\n");
-		return ret;
+	pair = kzalloc(size_add(sizeof(*pair), asrc->pair_priv_size), GFP_KERNEL);
+	if (!pair)
+		return -ENOMEM;
+
+	pair->asrc = asrc;
+	pair->private = (void *)pair + sizeof(struct fsl_asrc_pair);
+
+	/* Request a pair, which will be released later.
+	 * Request pair function needs channel num as input, for this
+	 * pair, we just request "1" channel temporarily.
+	 */
+	ret = asrc->request_pair(1, pair);
+	if (ret < 0) {
+		dev_err(dev, "failed to request asrc pair\n");
+		goto req_pair_err;
+	}
+
+	/* Request a dma channel, which will be released later. */
+	chan = asrc->get_dma_channel(pair, IN);
+	if (!chan) {
+		dev_err(dev, "failed to get dma channel\n");
+		ret = -EINVAL;
+		goto dma_chan_err;
 	}
 
-	return snd_pcm_set_fixed_buffer_all(pcm, SNDRV_DMA_TYPE_DEV,
-					    card->dev, FSL_ASRC_DMABUF_SIZE);
+	ret = snd_pcm_set_fixed_buffer_all(pcm,
+					   SNDRV_DMA_TYPE_DEV,
+					   chan->device->dev,
+					   FSL_ASRC_DMABUF_SIZE);
+
+	dma_release_channel(chan);
+
+dma_chan_err:
+	asrc->release_pair(pair);
+
+req_pair_err:
+	kfree(pair);
+
+	return ret;
 }
 
 struct snd_soc_component_driver fsl_asrc_component = {
-- 
2.34.1

Re: [PATCH v4 2/4] ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M

[Frank Li]

On Fri, Feb 06, 2026 at 09:48:03AM +0800, Shengjiu Wang wrote:
> There is a limitation on i.MX952 that dma request is not cleared at the
> end of conversion with dma slave mode. Which causes sample is dropped
> from the input fifo on the second time if dma is triggered before the
> client device and EDMA may copy wrong data from output fifo as the output
> fifo is not ready in the beginning.
>
> The solution is to trigger asrc before dma on i.MX952, and add delay to
> wait output data is generated then start the EDMA for output, otherwise
> the m2m function has noise issues.
>
> So add an option to start ASRC first for M2M before ASRC is enabled on
> i.MX952.
>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>
>  sound/soc/fsl/fsl_asrc.c        | 22 ++++++++++++++++++++++
>  sound/soc/fsl/fsl_asrc.h        |  4 ++++
>  sound/soc/fsl/fsl_asrc_common.h |  4 ++++
>  sound/soc/fsl/fsl_asrc_m2m.c    |  8 +++++++-
>  4 files changed, 37 insertions(+), 1 deletion(-)
>
> diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
> index 92fb16f7be45..2fe25667c888 100644
> --- a/sound/soc/fsl/fsl_asrc.c
> +++ b/sound/soc/fsl/fsl_asrc.c
> @@ -1078,6 +1078,26 @@ static unsigned int fsl_asrc_get_output_fifo_size(struct fsl_asrc_pair *pair)
>  	return val >> ASRFSTi_OUTPUT_FIFO_SHIFT;
>  }
>
> +static bool fsl_asrc_m2m_output_ready(struct fsl_asrc_pair *pair)
> +{
> +	struct fsl_asrc *asrc = pair->asrc;
> +	enum asrc_pair_index index = pair->index;
> +	u32 val;
> +	int ret;
> +
> +	/* Check output fifo status if it exceeds the watermark. */
> +	ret = regmap_read_poll_timeout(asrc->regmap, REG_ASRFST(index), val,
> +				       (ASRFSTi_OUTPUT_FIFO_FILL(val) >= ASRC_M2M_OUTPUTFIFO_WML),
> +				       1, 1000);
> +
> +	if (ret) {
> +		pair_warn("output is not ready\n");
> +		return false;
> +	}
> +
> +	return true;
> +}
> +
>  static int fsl_asrc_m2m_prepare(struct fsl_asrc_pair *pair)
>  {
>  	struct fsl_asrc_pair_priv *pair_priv = pair->private;
> @@ -1275,6 +1295,7 @@ static int fsl_asrc_probe(struct platform_device *pdev)
>
>  	asrc_priv->soc = of_device_get_match_data(&pdev->dev);
>  	asrc->use_edma = asrc_priv->soc->use_edma;
> +	asrc->start_before_dma = asrc_priv->soc->start_before_dma;
>  	asrc->get_dma_channel = fsl_asrc_get_dma_channel;
>  	asrc->request_pair = fsl_asrc_request_pair;
>  	asrc->release_pair = fsl_asrc_release_pair;
> @@ -1289,6 +1310,7 @@ static int fsl_asrc_probe(struct platform_device *pdev)
>  	asrc->m2m_get_maxburst = fsl_asrc_m2m_get_maxburst;
>  	asrc->m2m_pair_resume = fsl_asrc_m2m_pair_resume;
>  	asrc->m2m_get_cap = fsl_asrc_m2m_get_cap;
> +	asrc->m2m_output_ready = fsl_asrc_m2m_output_ready;
>
>  	if (of_device_is_compatible(np, "fsl,imx35-asrc")) {
>  		asrc_priv->clk_map[IN] = input_clk_map_imx35;
> diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
> index 1c492eb237f5..60b6865ca952 100644
> --- a/sound/soc/fsl/fsl_asrc.h
> +++ b/sound/soc/fsl/fsl_asrc.h
> @@ -257,6 +257,8 @@
>  #define ASRFSTi_OUTPUT_FIFO_WIDTH	7
>  #define ASRFSTi_OUTPUT_FIFO_SHIFT	12
>  #define ASRFSTi_OUTPUT_FIFO_MASK	(((1 << ASRFSTi_OUTPUT_FIFO_WIDTH) - 1) << ASRFSTi_OUTPUT_FIFO_SHIFT)
> +#define ASRFSTi_OUTPUT_FIFO_FILL(v)	\
> +	(((v) & ASRFSTi_OUTPUT_FIFO_MASK) >> ASRFSTi_OUTPUT_FIFO_SHIFT)
>  #define ASRFSTi_IAEi_SHIFT		11
>  #define ASRFSTi_IAEi_MASK		(1 << ASRFSTi_IAEi_SHIFT)
>  #define ASRFSTi_IAEi			(1 << ASRFSTi_IAEi_SHIFT)
> @@ -432,10 +434,12 @@ struct dma_block {
>   *
>   * @use_edma: using edma as dma device or not
>   * @channel_bits: width of ASRCNCR register for each pair
> + * @start_before_dma: start asrc before dma
>   */
>  struct fsl_asrc_soc_data {
>  	bool use_edma;
>  	unsigned int channel_bits;
> +	bool start_before_dma;
>  };
>
>  /**
> diff --git a/sound/soc/fsl/fsl_asrc_common.h b/sound/soc/fsl/fsl_asrc_common.h
> index 0cd595b0f629..c8a1a2b5915d 100644
> --- a/sound/soc/fsl/fsl_asrc_common.h
> +++ b/sound/soc/fsl/fsl_asrc_common.h
> @@ -107,6 +107,7 @@ struct fsl_asrc_pair {
>   * @asrc_rate: default sample rate for ASoC Back-Ends
>   * @asrc_format: default sample format for ASoC Back-Ends
>   * @use_edma: edma is used
> + * @start_before_dma: start asrc before dma
>   * @get_dma_channel: function pointer
>   * @request_pair: function pointer
>   * @release_pair: function pointer
> @@ -116,6 +117,7 @@ struct fsl_asrc_pair {
>   * @m2m_start: function pointer
>   * @m2m_unprepare: function pointer
>   * @m2m_stop: function pointer
> + * @m2m_output_ready: function pointer, check output fifo ready or not
>   * @m2m_calc_out_len: function pointer
>   * @m2m_get_maxburst: function pointer
>   * @m2m_pair_suspend: function pointer
> @@ -143,6 +145,7 @@ struct fsl_asrc {
>  	int asrc_rate;
>  	snd_pcm_format_t asrc_format;
>  	bool use_edma;
> +	bool start_before_dma;
>
>  	struct dma_chan *(*get_dma_channel)(struct fsl_asrc_pair *pair, bool dir);
>  	int (*request_pair)(int channels, struct fsl_asrc_pair *pair);
> @@ -154,6 +157,7 @@ struct fsl_asrc {
>  	int (*m2m_start)(struct fsl_asrc_pair *pair);
>  	int (*m2m_unprepare)(struct fsl_asrc_pair *pair);
>  	int (*m2m_stop)(struct fsl_asrc_pair *pair);
> +	bool (*m2m_output_ready)(struct fsl_asrc_pair *pair);
>
>  	int (*m2m_calc_out_len)(struct fsl_asrc_pair *pair, int input_buffer_length);
>  	int (*m2m_get_maxburst)(u8 dir, struct fsl_asrc_pair *pair);
> diff --git a/sound/soc/fsl/fsl_asrc_m2m.c b/sound/soc/fsl/fsl_asrc_m2m.c
> index f46881f71e43..77999526dd9e 100644
> --- a/sound/soc/fsl/fsl_asrc_m2m.c
> +++ b/sound/soc/fsl/fsl_asrc_m2m.c
> @@ -253,15 +253,21 @@ static int asrc_m2m_device_run(struct fsl_asrc_pair *pair, struct snd_compr_task
>  	reinit_completion(&pair->complete[IN]);
>  	reinit_completion(&pair->complete[OUT]);
>
> +	if (asrc->start_before_dma)
> +		asrc->m2m_start(pair);
> +
>  	/* Submit DMA request */
>  	dmaengine_submit(pair->desc[IN]);
>  	dma_async_issue_pending(pair->desc[IN]->chan);
>  	if (out_dma_len > 0) {
> +		if (asrc->start_before_dma && asrc->m2m_output_ready)
> +			asrc->m2m_output_ready(pair);
>  		dmaengine_submit(pair->desc[OUT]);
>  		dma_async_issue_pending(pair->desc[OUT]->chan);
>  	}
>
> -	asrc->m2m_start(pair);
> +	if (!asrc->start_before_dma)
> +		asrc->m2m_start(pair);
>
>  	if (!wait_for_completion_interruptible_timeout(&pair->complete[IN], 10 * HZ)) {
>  		dev_err(dev, "out DMA task timeout\n");
> --
> 2.34.1
>

Re: [PATCH v4 3/4] ASoC: fsl_asrc: Add support for i.MX952 platform

[Frank Li]

On Fri, Feb 06, 2026 at 09:48:04AM +0800, Shengjiu Wang wrote:
> Add a compatible string, clock mapping table and enable the option
> 'start_before_dma' to support ASRC on the i.MX952 platform.
>
> The clock mapping table is to map the clock sources on i.MX952 to the
> clock ids in the driver, the clock ids are for all the clock sources on
> all supported platforms.
>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  sound/soc/fsl/fsl_asrc.c | 16 ++++++++++++++++
>  sound/soc/fsl/fsl_asrc.h | 14 ++++++++++++++
>  2 files changed, 30 insertions(+)
>
> diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
> index 2fe25667c888..5fda9b647c70 100644
> --- a/sound/soc/fsl/fsl_asrc.c
> +++ b/sound/soc/fsl/fsl_asrc.c
> @@ -106,6 +106,12 @@ static unsigned char clk_map_imx8qxp[2][ASRC_CLK_MAP_LEN] = {
>  	},
>  };
>
> +static unsigned char clk_map_imx952[ASRC_CLK_MAP_LEN] = {
> +	0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0x0,
> +	0x0, 0x1, 0x2, 0x3, 0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0x4, 0x5, 0x6, 0x8, 0xf, 0xf,
> +	0xf, 0xf, 0xf, 0xf, 0xf, 0xf, 0x7, 0x9, 0xa, 0xb, 0xc, 0xd, 0xf, 0xf, 0xf, 0xf,
> +};
> +
>  /*
>   * According to RM, the divider range is 1 ~ 8,
>   * prescaler is power of 2 from 1 ~ 128.
> @@ -1337,6 +1343,9 @@ static int fsl_asrc_probe(struct platform_device *pdev)
>  			asrc_priv->clk_map[IN] = clk_map_imx8qxp[map_idx];
>  			asrc_priv->clk_map[OUT] = clk_map_imx8qxp[map_idx];
>  		}
> +	} else if (of_device_is_compatible(np, "fsl,imx952-asrc")) {
> +		asrc_priv->clk_map[IN] = clk_map_imx952;
> +		asrc_priv->clk_map[OUT] = clk_map_imx952;
>  	}
>
>  	asrc->channel_avail = 10;
> @@ -1575,11 +1584,18 @@ static const struct fsl_asrc_soc_data fsl_asrc_imx8qxp_data = {
>  	.channel_bits = 4,
>  };
>
> +static const struct fsl_asrc_soc_data fsl_asrc_imx952_data = {
> +	.use_edma = true,
> +	.channel_bits = 4,
> +	.start_before_dma = true,
> +};
> +
>  static const struct of_device_id fsl_asrc_ids[] = {
>  	{ .compatible = "fsl,imx35-asrc", .data = &fsl_asrc_imx35_data },
>  	{ .compatible = "fsl,imx53-asrc", .data = &fsl_asrc_imx53_data },
>  	{ .compatible = "fsl,imx8qm-asrc", .data = &fsl_asrc_imx8qm_data },
>  	{ .compatible = "fsl,imx8qxp-asrc", .data = &fsl_asrc_imx8qxp_data },
> +	{ .compatible = "fsl,imx952-asrc", .data = &fsl_asrc_imx952_data },
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, fsl_asrc_ids);
> diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
> index 60b6865ca952..7a81366a0ee4 100644
> --- a/sound/soc/fsl/fsl_asrc.h
> +++ b/sound/soc/fsl/fsl_asrc.h
> @@ -326,6 +326,13 @@ enum asrc_inclk {
>  	INCLK_SAI6_TX_BCLK     = 0x22,
>  	INCLK_HDMI_RX_SAI0_RX_BCLK     = 0x24,
>  	INCLK_HDMI_TX_SAI0_TX_BCLK     = 0x25,
> +
> +	INCLK_SAI2_TX_BCLK	= 0x26,
> +	INCLK_SAI3_TX_BCLK	= 0x27,
> +	INCLK_SAI4_RX_BCLK	= 0x28,
> +	INCLK_SAI4_TX_BCLK	= 0x29,
> +	INCLK_SAI5_RX_BCLK	= 0x2a,
> +	INCLK_SAI5_TX_BCLK	= 0x2b,
>  };
>
>  enum asrc_outclk {
> @@ -366,6 +373,13 @@ enum asrc_outclk {
>  	OUTCLK_SAI6_TX_BCLK     = 0x22,
>  	OUTCLK_HDMI_RX_SAI0_RX_BCLK     = 0x24,
>  	OUTCLK_HDMI_TX_SAI0_TX_BCLK     = 0x25,
> +
> +	OUTCLK_SAI2_TX_BCLK	= 0x26,
> +	OUTCLK_SAI3_TX_BCLK	= 0x27,
> +	OUTCLK_SAI4_RX_BCLK	= 0x28,
> +	OUTCLK_SAI4_TX_BCLK	= 0x29,
> +	OUTCLK_SAI5_RX_BCLK	= 0x2a,
> +	OUTCLK_SAI5_TX_BCLK	= 0x2b,
>  };
>
>  #define ASRC_CLK_MAX_NUM	16
> --
> 2.34.1
>

Re: [PATCH v4 0/4] ASoC: fsl_asrc: support the i.MX952 platform

[Mark Brown]

On Fri, 06 Feb 2026 09:48:01 +0800, Shengjiu Wang wrote:
> Update dt binding document and update driver to suppot ASRC on i.MX952.
> 
> Changes in v4:
> - add Reviewed-by from Daniel in patch 2/4, 3/4
> - add Reviewed-by from Frank in patch 4/4
> - update the commit message for patch 4/4
> - remove 'retry' in patch 2/4, reduce the threshold for timeout.
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/4] ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform
      commit: 37bb773b4a5a5107b92beda3447a7c6c0cfc1237
[2/4] ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M
      commit: 83447a38ba9abac52bc110566d3e117753899f69
[3/4] ASoC: fsl_asrc: Add support for i.MX952 platform
      commit: 6a8c6f5587337eceb387812b6f47bc16c125b883
[4/4] ASoC: fsl_asrc_dma: allocate memory from dma device
      commit: b010c782341b79edbeb80706360b772db908daa6

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark