From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from xproxy.gmail.com (xproxy.gmail.com [66.249.82.206]) by ozlabs.org (Postfix) with ESMTP id 7CFD9689D9 for ; Thu, 2 Feb 2006 04:27:29 +1100 (EST) Received: by xproxy.gmail.com with SMTP id i27so133297wxd for ; Wed, 01 Feb 2006 09:27:28 -0800 (PST) Message-ID: Date: Wed, 1 Feb 2006 17:27:28 +0000 From: Addison Baldwin To: linuxppc-embedded@ozlabs.org Subject: Re: MPC8272ADS Hangs with gcc 4.0.0 and u-boot 1.1.4 In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 References: List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Really sorry! I sent this message to the wrong list. I'll send it to the U-Boot. Regards, Addison Baldwin On 2/1/06, Addison Baldwin wrote: > Hi developers > > I have a MPC8272ADS board, from Freescale. I'm using low-boot > configuration (HRCW is 0x0E_74_B2_0A). > > I have ELDK 3.1 and ELDK 4.0 installed. I'm using U-Boot 1.1.4. When I > compile U-Boot with GCC 3.3.3, the board works ok, but not with GCC > 4.0.0. All the ethernet leds freeze turned on and the Run led too. It > makes me thinking the board entered some loop state. Nothing appears > at serial port. > > If anyone had this problem, or if anyone have such a configuration > working (GCC 4 and U-Boot 1.1.4 with this board), any help will be > very appreciated. > > Regards, > Addison Baldwin >