BDI2000 help

BDI2000 help

[Steve Iribarne (GMail)]

Hello All.

Yes it's me again.  So I've got a BDI2000.  I have my serial cable
hooked up and I can run the ./bdisetup -v program.

The question I have is what "type" do I select for my MPC8260.  As you
can see I'm new to this part of the PPC world.  I'm usually a bit
higher up and someone has already set this up for me.

I think I have everything else setup right, I just don't get that last
bit.  Because I think I need a configuration file for it.  Correct?

Thanks.

-stv

Re: BDI2000 help

[Wolfgang Denk]

In message <b4b98b690605081527u9001aandfd6f54733c2a09d@mail.gmail.com> you wrote:
> 
> The question I have is what "type" do I select for my MPC8260.  As you
> can see I'm new to this part of the PPC world.  I'm usually a bit
> higher up and someone has already set this up for me.

Well, maybe you can come down a bit and start reading the manual that
comes with the BDI2000?


Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
For every complex problem, there is a solution that is simple,  neat,
and wrong.                                           -- H. L. Mencken

Re: BDI2000 help

[Steve Iribarne (GMail)]

On 5/8/06, Wolfgang Denk <wd@denx.de> wrote:
> In message <b4b98b690605081527u9001aandfd6f54733c2a09d@mail.gmail.com> yo=
u wrote:
> >
> > The question I have is what "type" do I select for my MPC8260.  As you
> > can see I'm new to this part of the PPC world.  I'm usually a bit
> > higher up and someone has already set this up for me.
>
> Well, maybe you can come down a bit and start reading the manual that
> comes with the BDI2000?
>
>
Funny Wolfgang.  I did read it but we only have a very outdated
version.  So it only talks about the MPC8xx/MCP5xx.  So it's a bit
outdated.  I couldn't readily find the newer manual.  So when all else
fails.  Ask.  :)



> Best regards,
>
> Wolfgang Denk
>
> --
> Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
> For every complex problem, there is a solution that is simple,  neat,
> and wrong.                                           -- H. L. Mencken
>

Re: BDI2000 help

[Dan Malek]

On May 8, 2006, at 6:59 PM, Steve Iribarne (GMail) wrote:

> ....  So it only talks about the MPC8xx/MCP5xx.  So it's a bit
> outdated.  I couldn't readily find the newer manual.  So when all else
> fails.  Ask.  :)

Well, if you legally obtained the 82xx firmware for the
BDI, you should also have the matching manual.  The 8xx
and 82xx are separate products and manuals.


	-- Dan

Re: BDI2000 help

[Wolfgang Denk]

In message <b4b98b690605081559u7d03cb73m733a50ac2825fc27@mail.gmail.com> you wrote:
>
> > > The question I have is what "type" do I select for my MPC8260.  As you
...
> Funny Wolfgang.  I did read it but we only have a very outdated
> version.  So it only talks about the MPC8xx/MCP5xx.  So it's a bit

Ummm... if you want to use the BDI2000 with a MPC8260  processor  you
need  a  firmware  version for such a CPU. Abatron always ships these
with manual included (both on paper copy and on floppy disk).

> outdated.  I couldn't readily find the newer manual.  So when all else
> fails.  Ask.  :)

Before asking, search. You should be able to find
http://www.abatron.ch/, and then
http://www.abatron.ch/Files/ManGdbCOP-2000C.pdf

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
"The more data I punch in this card,  the lighter it becomes, and the
lower the mailing cost."
                     - Stan Kelly-Bootle, "The Devil's DP Dictionary"

Re: BDI2000 help

[Steve Iribarne (GMail)]

> Ummm... if you want to use the BDI2000 with a MPC8260  processor  you
> need  a  firmware  version for such a CPU. Abatron always ships these
> with manual included (both on paper copy and on floppy disk).
>
> > outdated.  I couldn't readily find the newer manual.  So when all else
> > fails.  Ask.  :)
>
> Before asking, search. You should be able to find
> http://www.abatron.ch/, and then
> http://www.abatron.ch/Files/ManGdbCOP-2000C.pdf
>


Thanks.  And yes I got this all legal its just that some people in the
company quit and I'm still trying to find everything.