Re: Problem with Xilinx Uart Lite

["Qichen Huang" <jasonal00@googlemail.com>]

[-- Attachment #1: Type: text/plain, Size: 1778 bytes --]

Hello Andrei,

Thank you. I have tried this patch, but without luck, the system can not
start, there's no login prompt.
Boot stopps after starting system.
The boot log looks like this:

loaded at: 00400000 004C51E0
board data at: 004C2138 004C2150
relocated to: 0040530C 00405324
zimage at: 00405811 004C1A00
avail ram: 004C6000 04000000

Linux/PPC load: console=ttl0 ip=off root=/dev/xsysace/disc0/part3 rw
Uncompressing Linux...done.
Now booting the kernel
......

Welcome to ML300 powerpc linux 2.4.21, E.I.S. edition

Starting system...
mounting /proc: done.
Mounting '/' read-write: mount: Cannot read /etc/mtab: No such file or
directory

done.
brining up loopback interface: done.
Setup IP-address for eth0: done.
Mounting /tmp: done.
Starting syslogd: done.
Starting klogd: done.
Starting


Thanks,
Qichen

ps. Sorry, I forgot to post this to the mailing list.


On 6/30/06, Andrei Konovalov <akonovalov@ru.mvista.com> wrote:
>
> Seeing a lot of ^M (LF) characters in the end of lines makes me think
> you are using [Win]DOS.
> This makes the patch to look somewhat funny - some of the lines terminated
> with
> <CR> only ("Unix style"), some - with <CR><LF> ("DOS style").
>
> Please try the attached patch. It should help.
>
> Thanks,
> Andrei
>
> Qichen Huang wrote:
> > Hello,
> >
> > attached is my xuartlite_serial.c
> >
> > Thanks,
> > Qichen
> >
> > On 6/30/06, *Andrei Konovalov* <akonovalov@ru.mvista.com
> > <mailto:akonovalov@ru.mvista.com>> wrote:
> >
> >      > Xilinx OS Independent Code XAssert: xuartlite.c:194
> >      > Code may crash due to unhandled errors.
> >
> >     So this is inside XUartLite_Send().
> >     Could you send me your xuartlite_serial.c?
> >     Seems yours doesn't have one of the fixes.
> >
> >     Thanks,
> >     Andrei
>
>
>

[-- Attachment #2: Type: text/html, Size: 2681 bytes --]