From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from fk-out-0910.google.com (fk-out-0910.google.com [209.85.128.191]) by ozlabs.org (Postfix) with ESMTP id A92BEDDED3 for ; Sun, 4 Jan 2009 11:45:17 +1100 (EST) Received: by fk-out-0910.google.com with SMTP id e30so3157449fke.9 for ; Sat, 03 Jan 2009 16:45:15 -0800 (PST) Message-ID: Date: Sun, 4 Jan 2009 01:45:15 +0100 From: "Leon Woestenberg" To: onramp123@yahoo.com Subject: Re: 2.6.28 does not boot on MPC8315E-RDB, or...? In-Reply-To: <008601c96e04$18b74bc0$6b03a8c0@sdelaney2> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 References: <008601c96e04$18b74bc0$6b03a8c0@sdelaney2> Cc: Linux PPC List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello, On Sun, Jan 4, 2009 at 1:33 AM, Steve DeLaney wrote: > > we are booting 2.6.26 on MPC8349-MITXE > do you need a device tree? this can be tftp loaded, or flashed in the board > and > cp.b from flash to ram before booting. > Earlier release kernels booted for me, and I use the device tree compiled from the device tree source that comes with the tree. I used the exact same build procedure for the kernel and device tree blob, it's just that 2.6.28 seems to reset on start for the MPC8315E-RDB for me. Just wanted to hear if the problem is with me alone, or not. Regards, -- Leon