From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-bw0-f10.google.com (mail-bw0-f10.google.com [209.85.218.10]) by ozlabs.org (Postfix) with ESMTP id 0DBF1DE4D4 for ; Tue, 6 Jan 2009 23:00:03 +1100 (EST) Received: by bwz3 with SMTP id 3so20618629bwz.9 for ; Tue, 06 Jan 2009 04:00:00 -0800 (PST) Message-ID: Date: Tue, 6 Jan 2009 12:54:27 +0100 From: "Leon Woestenberg" To: avorontsov@ru.mvista.com Subject: Re: 2.6.28 does not boot on MPC8315E-RDB, or...? In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 References: <008601c96e04$18b74bc0$6b03a8c0@sdelaney2> <20090105165817.GA24565@oksana.dev.rtsoft.ru> Cc: Linux PPC , onramp123@yahoo.com List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello, On Mon, Jan 5, 2009 at 11:07 PM, Leon Woestenberg wrote: >> >> 2.6.28 works fine here... using >> arch/powerpc/configs/83xx/mpc8315_rdb_defconfig and >> arch/powerpc/boot/dts/mpc8315erdb.dts >> Hope this helps, >> > Thanks for the report, I went back to the defconfig and at least it > gives me a partial boot: > False report. The partial boot was with a 2.6.24.7 dts, and 2.6.28 uImage. After some experimenting, I noticed garbage on the serial port. The pre-programmed u-boot is too old. The stupid thing is, I ran into this earlier, the thread is here: http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06551.html I forgot I was using the second board lying around, which hadn't had u-boot updated. Regards, -- Leon