From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from wr-out-0506.google.com (wr-out-0506.google.com [64.233.184.234]) by ozlabs.org (Postfix) with ESMTP id 0E25867B28 for ; Thu, 4 May 2006 04:52:40 +1000 (EST) Received: by wr-out-0506.google.com with SMTP id 58so204171wri for ; Wed, 03 May 2006 11:52:39 -0700 (PDT) Message-ID: Date: Wed, 3 May 2006 13:45:19 -0500 From: "Simon Smith" To: linuxppc-embedded@ozlabs.org Subject: Sandpoint X3B and 7447 - boot problems MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_Part_1149_13031985.1146681919785" List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , ------=_Part_1149_13031985.1146681919785 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi, I'm a new member on this list. I've been trying to get my Sandpoint X3B/mpmc7447 to boot a stock Linux kernel from kernel.org (tried 2.6.14 and 2.6.16). I'm running into a boot issue, I load zImage.elf (using DINK32 v13.1.1) - I get the "Linux/PPC load:" prompt and then nothing (no more text, and no more serial port response). I been searching through the archives - I did come across one email that mentioned that Motorola(Freescale) started to ship Sandpoint X3B's with serial #'s > 6000 with "different" switch settings (my board has a serial # greater than 6000). I haven't changed any switch settings from the defaults, the comments in arch/ppc/platforms/sandpoint.c seem to make reference to switch settings for the X1/2 board - but nothing about the X3B= . In all my searching I have yet to find any reference to what the switch settings for the X3B rev should be for Linux. If anyone has any pointers regarding the switch settings for the X3B - or anything else that might help - I would appreciate any help I can get. Here's my environment: Development Environment: ------------------------------------- RedHat Enterprise Linux 4.0 ELDK 4.0 cross devlopment tools (I'm successufully building zImage for sandpoint_defconfig and cross compiling for ppc_74xx-) build steps: export CROSS_COMPILE=3Dppc_74xx- make ARCH=3Dppc CROSS_COMPILE=3Dppc_74xx- sandpoint_defconfig make ARCH=3Dppc CROSS_COMPILE=3Dppc_74xx- zImage Board: --------- Sandpoint X3B , serial # > 6000 DINK32 v13.1.1 Altimus (MPMC7447) v1.1 Memory: Map B (CHRP) 128MB at CL3 Thanks, -Simon. ------=_Part_1149_13031985.1146681919785 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline Hi,

I'm a new member on this list.  I've been trying to get my = Sandpoint X3B/mpmc7447 to boot a stock Linux kernel from kernel.org (tried 2.6.14 and 2.6.16). I'm running into a bo= ot issue, I load=20 zImage.elf (using DINK32 v13.1.1) -  I get the "Linux/PPC load:&q= uot; prompt  and then nothing (no more text, and no more serial port r= esponse).

I been searching through the archives - I did come across = one email that mentioned that Motorola(Freescale) started to ship Sandpoint= X3B's with serial #'s > 6000 with "different" switch settings= (my board has a serial # greater than 6000).  I haven't changed any s= witch settings from the defaults, the comments in arch/ppc/platforms/sandpo= int.c seem to make reference to switch settings for the X1/2 board - but no= thing about the X3B. In all my searching I have yet to find any reference t= o what the switch settings for the X3B rev should be for Linux.

If anyone has any pointers regarding the switch settings for the X3= B - or anything else that might help - I would appreciate any help I can ge= t.

Here's my environment:

Development Environment:
-------= ------------------------------
RedHat Enterprise Linux 4.0
ELDK 4.0 cross devlopment tools

(= I'm successufully building zImage for sandpoint_defconfig and cross compili= ng for ppc_74xx-)

build steps:
  export CROSS_COMPILE=3Dppc_= 74xx-
  make ARCH=3Dppc CROSS_COMPILE=3Dppc_74xx- sandpoint_defconfig  make ARCH=3Dppc CROSS_COMPILE=3Dppc_74xx- zImage

Board:
-= --------
Sandpoint X3B , serial # > 6000
DINK32 v13.1.1
Altimus= (MPMC7447) v1.1
Memory: Map B (CHRP) 128MB at CL3

Thanks,

-Simon.

=
------=_Part_1149_13031985.1146681919785--