You can write into flash from linux if you have mapped the flash in mtd partition. you can open /dev/mtdx(partition that covers your flash area) file and use normal read/write function calls to read/write from the flash. Remember to erase the flash before attempting to write data. You can refer sourcecode of mtd-utils.

On 9/11/07, Yoni Levin <yoni.l@slyde-tech.com> wrote:

Hi , I have EN29LV640H flash ( http://www.eonsdi.com/pdf/EN29LV640.pdf)

On my mpc83xx board.

How can I write data to flash from linux.?

I guess it done with mtd , there is an example somewhere?

Thanks.

_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded