Re: Kernel v6.17-rc4 with STATIC_CALL_SELFTEST=y enabled fails to boot at early stage (PowerMac G4 DP)

[Madhavan Srinivasan <maddy@linux.ibm.com>]

On 9/4/25 1:01 PM, Christophe Leroy wrote:
> Hi Erhard,
> 
> Le 04/09/2025 à 00:44, Erhard Furtner a écrit :
>> Greetings!
>>
>> In a conversation with Andrew about his page table check code for PowerPC he found out there seems to be a general problem of the code patching code on ppc:
>>
>>  > I note that STATIC_CALL_SELFTEST seems to fail, which could be but isn't
>>  > necessarily related.
>>
>>  > Specifically, it looks like code patching fails if the instruction being patched
>>  > is in an __init function, and in this case, that occurs due to
>>  > page_table_check_pte_clear() being inlined into ptep_clear(), which is in turn
>>  > inlined into pte_clear_tests() in debug_vm_pgtable.c which is marked __init.
>>  > Very curious!
>>
>> Indeed, when I enable STATIC_CALL_SELFTEST=y on my G4 the kernel fails to boot at an early stage, the OpenFirmware console showing only:
>>
>> done
>> found display   : /pci@f0000000/ATY,AlteracParent@10/ATY,Alterac_B@1, opening...
>>
>> Without STATIC_CALL_SELFTEST the kernel boots just fine.
>>
>> Kernel .config attached.
> 
> With your .config, on QEMU I get the following. I will investigate.
> 
> [    0.000000] Kernel panic - not syncing: arch_static_call_transform: patching failed func_a+0x0/0x10 at 0x0
> [    0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.17.0-rc4-PMacG4+ #1628 PREEMPTLAZY
> [    0.000000] Hardware name: PowerMac3,1 7400 0xc0209 PowerMac
> [    0.000000] Call Trace:

I am using qemu with -M mac99 and it boots 

Hardware name: PowerMac3,1 7400 0xc0209 PowerMac
printk: legacy bootconsole [udbg0] enabled
-----------------------------------------------------
phys_mem_size     = 0x8000000
dcache_bsize      = 0x20

I am missing something here. Digging some more

Maddy


> [    0.000000] [c0dd7e60] [c0810e54] dump_stack_lvl+0x70/0x8c (unreliable)
> [    0.000000] [c0dd7e80] [c004b220] vpanic+0x114/0x2e4
> [    0.000000] [c0dd7eb0] [c004b45c] arch_set_bit+0x0/0x38
> [    0.000000] [c0dd7f00] [c00155fc] arch_static_call_transform+0xec/0x1e8
> [    0.000000] [c0dd7f30] [c0176944] __static_call_init+0x110/0x288
> [    0.000000] [c0dd7f80] [c0c19ab0] static_call_init+0x4c/0x9c
> [    0.000000] [c0dd7fa0] [c0c02e00] start_kernel+0x7c/0x664
> [    0.000000] [c0dd7ff0] [000035d0] 0x35d0
> [    0.000000] Rebooting in 40 seconds..
> 
> Christophe
>