Re: How to do IO mapped Implimentation ???

["Jeyner Gil Caga" <jeynergilcaga@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1153 bytes --]

Hi Misbah,

If I am not mistaken, ioremap takes 2 parameters,
ioremap(base_addr,size_to_remap). i have tried out_8() and in_8() to issue
the command.


Regards,
gil

On 12/28/07, Misbah khan <misbah_khan@engineer.com> wrote:
>
>
> Hi all...
>
> I am writing a driver in which device port is mapped to CPLD and 8 bit
> data
> bus is directly connected from processor to CPLD. Read write on CPLD
> memory
> mapped (buffer/register) is required to control the device. This is now IO
> mapped to processor.
>
> I need to know whether i am right if i impliment like this :-
>         addr=ioremap(base_addr);          // Remap to Mem mapped address
>         outb(addr) and inb(addr);
>
> Please suggest me if i am wrong or there could be better solution to this
> .
>
> -----Misbah <><
>
> --
> View this message in context:
> http://www.nabble.com/How-to-do-IO-mapped-Implimentation-----tp14522349p14522349.html
> Sent from the linuxppc-embedded mailing list archive at Nabble.com.
>
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>

[-- Attachment #2: Type: text/html, Size: 1922 bytes --]