[PATCH 2/2] powerpc: Move CONFIG_QE_GPIO to SoC

["Christophe Leroy (CS GROUP)" <chleroy@kernel.org>]

Commit 7aa1aa6ecec2 ("QE: Move QE from arch/powerpc to drivers/soc")
moved QE into drivers/soc including gpio.c but left CONFIG_QE_GPIO
in powerpc's Kconfig.

Move it to SoC as well as it is the only place it is used:

  drivers/soc/fsl/qe/Makefile:obj-$(CONFIG_QE_GPIO)       += gpio.o qe_ports_ic.o
  include/soc/fsl/qe/qe.h:#ifdef CONFIG_QE_GPIO
  include/soc/fsl/qe/qe.h:#endif /* CONFIG_QE_GPIO */

Link: https://lore.kernel.org/r/16a187116511f5c844c43a12d09f263e77f4fd60.1780936729.git.chleroy@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
---
 arch/powerpc/platforms/Kconfig | 8 --------
 drivers/soc/fsl/qe/Kconfig     | 8 ++++++++
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index c4e61843d9d99..2f797ac6f1b3f 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -228,14 +228,6 @@ config TAU_AVERAGE
 
 	  If in doubt, say N here.
 
-config QE_GPIO
-	bool "QE GPIO support"
-	depends on QUICC_ENGINE
-	select GPIOLIB
-	help
-	  Say Y here if you're going to use hardware that connects to the
-	  QE GPIOs.
-
 config CPM2
 	bool "Enable support for the CPM2 (Communications Processor Module)"
 	depends on (FSL_SOC_BOOKE && PPC32) || PPC_82xx
diff --git a/drivers/soc/fsl/qe/Kconfig b/drivers/soc/fsl/qe/Kconfig
index eb03f42ab9781..b35a8fd30ebfb 100644
--- a/drivers/soc/fsl/qe/Kconfig
+++ b/drivers/soc/fsl/qe/Kconfig
@@ -67,3 +67,11 @@ config QE_USB
 	default y if USB_FSL_QE
 	help
 	  QE USB Controller support
+
+config QE_GPIO
+	bool "QE GPIO support"
+	depends on QUICC_ENGINE
+	select GPIOLIB
+	help
+	  Say Y here if you're going to use hardware that connects to the
+	  QE GPIOs.
-- 
2.54.0