* [PATCH V5 1/4] ASoC: fsl_asrc: Use in(out)put_format instead of in(out)put_word_width
2019-09-26 1:29 [PATCH V5 0/4] update supported sample format Shengjiu Wang
@ 2019-09-26 1:29 ` Shengjiu Wang
2019-09-26 1:29 ` [PATCH V5 2/4] ASoC: fsl_asrc: update supported sample format Shengjiu Wang
` (2 subsequent siblings)
3 siblings, 0 replies; 6+ messages in thread
From: Shengjiu Wang @ 2019-09-26 1:29 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, lgirdwood, broonie,
perex, tiwai, alsa-devel, linuxppc-dev, linux-kernel, robh+dt,
mark.rutland, devicetree, lars
snd_pcm_format_t is more formal than enum asrc_word_width, which has
two property, width and physical width, which is more accurate than
enum asrc_word_width. So it is better to use in(out)put_format
instead of in(out)put_word_width.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
sound/soc/fsl/fsl_asrc.c | 56 +++++++++++++++++++++++++++-------------
sound/soc/fsl/fsl_asrc.h | 4 +--
2 files changed, 40 insertions(+), 20 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index cfa40ef6b1ca..4d3804a1ea55 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -265,6 +265,8 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
struct asrc_config *config = pair->config;
struct fsl_asrc *asrc_priv = pair->asrc_priv;
enum asrc_pair_index index = pair->index;
+ enum asrc_word_width input_word_width;
+ enum asrc_word_width output_word_width;
u32 inrate, outrate, indiv, outdiv;
u32 clk_index[2], div[2];
int in, out, channels;
@@ -283,9 +285,32 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
return -EINVAL;
}
- /* Validate output width */
- if (config->output_word_width == ASRC_WIDTH_8_BIT) {
- pair_err("does not support 8bit width output\n");
+ switch (snd_pcm_format_width(config->input_format)) {
+ case 8:
+ input_word_width = ASRC_WIDTH_8_BIT;
+ break;
+ case 16:
+ input_word_width = ASRC_WIDTH_16_BIT;
+ break;
+ case 24:
+ input_word_width = ASRC_WIDTH_24_BIT;
+ break;
+ default:
+ pair_err("does not support this input format, %d\n",
+ config->input_format);
+ return -EINVAL;
+ }
+
+ switch (snd_pcm_format_width(config->output_format)) {
+ case 16:
+ output_word_width = ASRC_WIDTH_16_BIT;
+ break;
+ case 24:
+ output_word_width = ASRC_WIDTH_24_BIT;
+ break;
+ default:
+ pair_err("does not support this output format, %d\n",
+ config->output_format);
return -EINVAL;
}
@@ -383,8 +408,8 @@ static int fsl_asrc_config_pair(struct fsl_asrc_pair *pair)
/* Implement word_width configurations */
regmap_update_bits(asrc_priv->regmap, REG_ASRMCR1(index),
ASRMCR1i_OW16_MASK | ASRMCR1i_IWD_MASK,
- ASRMCR1i_OW16(config->output_word_width) |
- ASRMCR1i_IWD(config->input_word_width));
+ ASRMCR1i_OW16(output_word_width) |
+ ASRMCR1i_IWD(input_word_width));
/* Enable BUFFER STALL */
regmap_update_bits(asrc_priv->regmap, REG_ASRMCR(index),
@@ -497,13 +522,13 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct fsl_asrc *asrc_priv = snd_soc_dai_get_drvdata(dai);
- int width = params_width(params);
struct snd_pcm_runtime *runtime = substream->runtime;
struct fsl_asrc_pair *pair = runtime->private_data;
unsigned int channels = params_channels(params);
unsigned int rate = params_rate(params);
struct asrc_config config;
- int word_width, ret;
+ snd_pcm_format_t format;
+ int ret;
ret = fsl_asrc_request_pair(channels, pair);
if (ret) {
@@ -513,15 +538,10 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
pair->config = &config;
- if (width == 16)
- width = ASRC_WIDTH_16_BIT;
- else
- width = ASRC_WIDTH_24_BIT;
-
if (asrc_priv->asrc_width == 16)
- word_width = ASRC_WIDTH_16_BIT;
+ format = SNDRV_PCM_FORMAT_S16_LE;
else
- word_width = ASRC_WIDTH_24_BIT;
+ format = SNDRV_PCM_FORMAT_S24_LE;
config.pair = pair->index;
config.channel_num = channels;
@@ -529,13 +549,13 @@ static int fsl_asrc_dai_hw_params(struct snd_pcm_substream *substream,
config.outclk = OUTCLK_ASRCK1_CLK;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- config.input_word_width = width;
- config.output_word_width = word_width;
+ config.input_format = params_format(params);
+ config.output_format = format;
config.input_sample_rate = rate;
config.output_sample_rate = asrc_priv->asrc_rate;
} else {
- config.input_word_width = word_width;
- config.output_word_width = width;
+ config.input_format = format;
+ config.output_format = params_format(params);
config.input_sample_rate = asrc_priv->asrc_rate;
config.output_sample_rate = rate;
}
diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
index c60075112570..38af485bdd22 100644
--- a/sound/soc/fsl/fsl_asrc.h
+++ b/sound/soc/fsl/fsl_asrc.h
@@ -342,8 +342,8 @@ struct asrc_config {
unsigned int dma_buffer_size;
unsigned int input_sample_rate;
unsigned int output_sample_rate;
- enum asrc_word_width input_word_width;
- enum asrc_word_width output_word_width;
+ snd_pcm_format_t input_format;
+ snd_pcm_format_t output_format;
enum asrc_inclk inclk;
enum asrc_outclk outclk;
};
--
2.21.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH V5 2/4] ASoC: fsl_asrc: update supported sample format
2019-09-26 1:29 [PATCH V5 0/4] update supported sample format Shengjiu Wang
2019-09-26 1:29 ` [PATCH V5 1/4] ASoC: fsl_asrc: Use in(out)put_format instead of in(out)put_word_width Shengjiu Wang
@ 2019-09-26 1:29 ` Shengjiu Wang
2019-09-26 1:29 ` [PATCH V5 3/4] ASoC: pcm_dmaengine: Extract snd_dmaengine_pcm_refine_runtime_hwparams Shengjiu Wang
2019-09-26 1:29 ` [PATCH V5 4/4] ASoC: fsl_asrc: Fix error with S24_3LE format bitstream in i.MX8 Shengjiu Wang
3 siblings, 0 replies; 6+ messages in thread
From: Shengjiu Wang @ 2019-09-26 1:29 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, lgirdwood, broonie,
perex, tiwai, alsa-devel, linuxppc-dev, linux-kernel, robh+dt,
mark.rutland, devicetree, lars
The ASRC support 24bit/16bit/8bit input width, which is
data width, not slot width.
For the S20_3LE format, the data with is 20bit, slot width
is 24bit, if we set ASRMCR1n.IWD to be 24bits, the result
is the volume is lower than expected, it likes 24bit data
right shift 4 bits
So replace S20_3LE with S24_3LE in supported list and add S8
format in TX supported list
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
sound/soc/fsl/fsl_asrc.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 4d3804a1ea55..584badf956d2 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -624,7 +624,7 @@ static int fsl_asrc_dai_probe(struct snd_soc_dai *dai)
#define FSL_ASRC_FORMATS (SNDRV_PCM_FMTBIT_S24_LE | \
SNDRV_PCM_FMTBIT_S16_LE | \
- SNDRV_PCM_FMTBIT_S20_3LE)
+ SNDRV_PCM_FMTBIT_S24_3LE)
static struct snd_soc_dai_driver fsl_asrc_dai = {
.probe = fsl_asrc_dai_probe,
@@ -635,7 +635,8 @@ static struct snd_soc_dai_driver fsl_asrc_dai = {
.rate_min = 5512,
.rate_max = 192000,
.rates = SNDRV_PCM_RATE_KNOT,
- .formats = FSL_ASRC_FORMATS,
+ .formats = FSL_ASRC_FORMATS |
+ SNDRV_PCM_FMTBIT_S8,
},
.capture = {
.stream_name = "ASRC-Capture",
--
2.21.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH V5 3/4] ASoC: pcm_dmaengine: Extract snd_dmaengine_pcm_refine_runtime_hwparams
2019-09-26 1:29 [PATCH V5 0/4] update supported sample format Shengjiu Wang
2019-09-26 1:29 ` [PATCH V5 1/4] ASoC: fsl_asrc: Use in(out)put_format instead of in(out)put_word_width Shengjiu Wang
2019-09-26 1:29 ` [PATCH V5 2/4] ASoC: fsl_asrc: update supported sample format Shengjiu Wang
@ 2019-09-26 1:29 ` Shengjiu Wang
2019-09-26 1:29 ` [PATCH V5 4/4] ASoC: fsl_asrc: Fix error with S24_3LE format bitstream in i.MX8 Shengjiu Wang
3 siblings, 0 replies; 6+ messages in thread
From: Shengjiu Wang @ 2019-09-26 1:29 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, lgirdwood, broonie,
perex, tiwai, alsa-devel, linuxppc-dev, linux-kernel, robh+dt,
mark.rutland, devicetree, lars
When set the runtime hardware parameters, we may need to query
the capability of DMA to complete the parameters.
This patch is to Extract this operation from
dmaengine_pcm_set_runtime_hwparams function to a separate function
snd_dmaengine_pcm_refine_runtime_hwparams, that other components
which need this feature can call this function.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Nicolin Chen <nicoleotsuka@gmail.com>
---
include/sound/dmaengine_pcm.h | 5 ++
sound/core/pcm_dmaengine.c | 83 +++++++++++++++++++++++++++
sound/soc/soc-generic-dmaengine-pcm.c | 61 ++------------------
3 files changed, 94 insertions(+), 55 deletions(-)
diff --git a/include/sound/dmaengine_pcm.h b/include/sound/dmaengine_pcm.h
index c679f6116580..b65220685920 100644
--- a/include/sound/dmaengine_pcm.h
+++ b/include/sound/dmaengine_pcm.h
@@ -83,6 +83,11 @@ void snd_dmaengine_pcm_set_config_from_dai_data(
const struct snd_dmaengine_dai_dma_data *dma_data,
struct dma_slave_config *config);
+int snd_dmaengine_pcm_refine_runtime_hwparams(
+ struct snd_pcm_substream *substream,
+ struct snd_dmaengine_dai_dma_data *dma_data,
+ struct snd_pcm_hardware *hw,
+ struct dma_chan *chan);
/*
* Try to request the DMA channel using compat_request_channel or
diff --git a/sound/core/pcm_dmaengine.c b/sound/core/pcm_dmaengine.c
index 89a05926ac73..5749a8a49784 100644
--- a/sound/core/pcm_dmaengine.c
+++ b/sound/core/pcm_dmaengine.c
@@ -369,4 +369,87 @@ int snd_dmaengine_pcm_close_release_chan(struct snd_pcm_substream *substream)
}
EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_close_release_chan);
+/**
+ * snd_dmaengine_pcm_refine_runtime_hwparams - Refine runtime hw params
+ * @substream: PCM substream
+ * @dma_data: DAI DMA data
+ * @hw: PCM hw params
+ * @chan: DMA channel to use for data transfers
+ *
+ * Returns 0 on success, a negative error code otherwise.
+ *
+ * This function will query DMA capability, then refine the pcm hardware
+ * parameters.
+ */
+int snd_dmaengine_pcm_refine_runtime_hwparams(
+ struct snd_pcm_substream *substream,
+ struct snd_dmaengine_dai_dma_data *dma_data,
+ struct snd_pcm_hardware *hw,
+ struct dma_chan *chan)
+{
+ struct dma_slave_caps dma_caps;
+ u32 addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ snd_pcm_format_t i;
+ int ret = 0;
+
+ if (!hw || !chan || !dma_data)
+ return -EINVAL;
+
+ ret = dma_get_slave_caps(chan, &dma_caps);
+ if (ret == 0) {
+ if (dma_caps.cmd_pause && dma_caps.cmd_resume)
+ hw->info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
+ if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
+ hw->info |= SNDRV_PCM_INFO_BATCH;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ addr_widths = dma_caps.dst_addr_widths;
+ else
+ addr_widths = dma_caps.src_addr_widths;
+ }
+
+ /*
+ * If SND_DMAENGINE_PCM_DAI_FLAG_PACK is set keep
+ * hw.formats set to 0, meaning no restrictions are in place.
+ * In this case it's the responsibility of the DAI driver to
+ * provide the supported format information.
+ */
+ if (!(dma_data->flags & SND_DMAENGINE_PCM_DAI_FLAG_PACK))
+ /*
+ * Prepare formats mask for valid/allowed sample types. If the
+ * dma does not have support for the given physical word size,
+ * it needs to be masked out so user space can not use the
+ * format which produces corrupted audio.
+ * In case the dma driver does not implement the slave_caps the
+ * default assumption is that it supports 1, 2 and 4 bytes
+ * widths.
+ */
+ for (i = SNDRV_PCM_FORMAT_FIRST; i <= SNDRV_PCM_FORMAT_LAST; i++) {
+ int bits = snd_pcm_format_physical_width(i);
+
+ /*
+ * Enable only samples with DMA supported physical
+ * widths
+ */
+ switch (bits) {
+ case 8:
+ case 16:
+ case 24:
+ case 32:
+ case 64:
+ if (addr_widths & (1 << (bits / 8)))
+ hw->formats |= pcm_format_to_bits(i);
+ break;
+ default:
+ /* Unsupported types */
+ break;
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(snd_dmaengine_pcm_refine_runtime_hwparams);
+
MODULE_LICENSE("GPL");
diff --git a/sound/soc/soc-generic-dmaengine-pcm.c b/sound/soc/soc-generic-dmaengine-pcm.c
index 748f5f641002..b9f147eaf7c4 100644
--- a/sound/soc/soc-generic-dmaengine-pcm.c
+++ b/sound/soc/soc-generic-dmaengine-pcm.c
@@ -118,12 +118,7 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea
struct device *dma_dev = dmaengine_dma_dev(pcm, substream);
struct dma_chan *chan = pcm->chan[substream->stream];
struct snd_dmaengine_dai_dma_data *dma_data;
- struct dma_slave_caps dma_caps;
struct snd_pcm_hardware hw;
- u32 addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
- BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
- BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
- snd_pcm_format_t i;
int ret;
if (pcm->config && pcm->config->pcm_hardware)
@@ -145,56 +140,12 @@ static int dmaengine_pcm_set_runtime_hwparams(struct snd_pcm_substream *substrea
if (pcm->flags & SND_DMAENGINE_PCM_FLAG_NO_RESIDUE)
hw.info |= SNDRV_PCM_INFO_BATCH;
- ret = dma_get_slave_caps(chan, &dma_caps);
- if (ret == 0) {
- if (dma_caps.cmd_pause && dma_caps.cmd_resume)
- hw.info |= SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME;
- if (dma_caps.residue_granularity <= DMA_RESIDUE_GRANULARITY_SEGMENT)
- hw.info |= SNDRV_PCM_INFO_BATCH;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- addr_widths = dma_caps.dst_addr_widths;
- else
- addr_widths = dma_caps.src_addr_widths;
- }
-
- /*
- * If SND_DMAENGINE_PCM_DAI_FLAG_PACK is set keep
- * hw.formats set to 0, meaning no restrictions are in place.
- * In this case it's the responsibility of the DAI driver to
- * provide the supported format information.
- */
- if (!(dma_data->flags & SND_DMAENGINE_PCM_DAI_FLAG_PACK))
- /*
- * Prepare formats mask for valid/allowed sample types. If the
- * dma does not have support for the given physical word size,
- * it needs to be masked out so user space can not use the
- * format which produces corrupted audio.
- * In case the dma driver does not implement the slave_caps the
- * default assumption is that it supports 1, 2 and 4 bytes
- * widths.
- */
- for (i = SNDRV_PCM_FORMAT_FIRST; i <= SNDRV_PCM_FORMAT_LAST; i++) {
- int bits = snd_pcm_format_physical_width(i);
-
- /*
- * Enable only samples with DMA supported physical
- * widths
- */
- switch (bits) {
- case 8:
- case 16:
- case 24:
- case 32:
- case 64:
- if (addr_widths & (1 << (bits / 8)))
- hw.formats |= pcm_format_to_bits(i);
- break;
- default:
- /* Unsupported types */
- break;
- }
- }
+ ret = snd_dmaengine_pcm_refine_runtime_hwparams(substream,
+ dma_data,
+ &hw,
+ chan);
+ if (ret)
+ return ret;
return snd_soc_set_runtime_hwparams(substream, &hw);
}
--
2.21.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH V5 4/4] ASoC: fsl_asrc: Fix error with S24_3LE format bitstream in i.MX8
2019-09-26 1:29 [PATCH V5 0/4] update supported sample format Shengjiu Wang
` (2 preceding siblings ...)
2019-09-26 1:29 ` [PATCH V5 3/4] ASoC: pcm_dmaengine: Extract snd_dmaengine_pcm_refine_runtime_hwparams Shengjiu Wang
@ 2019-09-26 1:29 ` Shengjiu Wang
2019-09-26 1:49 ` Nicolin Chen
3 siblings, 1 reply; 6+ messages in thread
From: Shengjiu Wang @ 2019-09-26 1:29 UTC (permalink / raw)
To: timur, nicoleotsuka, Xiubo.Lee, festevam, lgirdwood, broonie,
perex, tiwai, alsa-devel, linuxppc-dev, linux-kernel, robh+dt,
mark.rutland, devicetree, lars
There is error "aplay: pcm_write:2023: write error: Input/output error"
on i.MX8QM/i.MX8QXP platform for S24_3LE format.
In i.MX8QM/i.MX8QXP, the DMA is EDMA, which don't support 24bit
sample, but we didn't add any constraint, that cause issues.
So we need to query the caps of dma, then update the hw parameters
according to the caps.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
sound/soc/fsl/fsl_asrc.c | 4 +--
sound/soc/fsl/fsl_asrc.h | 3 ++
sound/soc/fsl/fsl_asrc_dma.c | 66 +++++++++++++++++++++++++++++++-----
3 files changed, 63 insertions(+), 10 deletions(-)
diff --git a/sound/soc/fsl/fsl_asrc.c b/sound/soc/fsl/fsl_asrc.c
index 584badf956d2..0bf91a6f54b9 100644
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -115,7 +115,7 @@ static void fsl_asrc_sel_proc(int inrate, int outrate,
* within range [ANCA, ANCA+ANCB-1], depends on the channels of pair A
* while pair A and pair C are comparatively independent.
*/
-static int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
+int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
{
enum asrc_pair_index index = ASRC_INVALID_PAIR;
struct fsl_asrc *asrc_priv = pair->asrc_priv;
@@ -158,7 +158,7 @@ static int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair)
*
* It clears the resource from asrc_priv and releases the occupied channels.
*/
-static void fsl_asrc_release_pair(struct fsl_asrc_pair *pair)
+void fsl_asrc_release_pair(struct fsl_asrc_pair *pair)
{
struct fsl_asrc *asrc_priv = pair->asrc_priv;
enum asrc_pair_index index = pair->index;
diff --git a/sound/soc/fsl/fsl_asrc.h b/sound/soc/fsl/fsl_asrc.h
index 38af485bdd22..2b57e8c53728 100644
--- a/sound/soc/fsl/fsl_asrc.h
+++ b/sound/soc/fsl/fsl_asrc.h
@@ -462,4 +462,7 @@ struct fsl_asrc {
#define DRV_NAME "fsl-asrc-dai"
extern struct snd_soc_component_driver fsl_asrc_component;
struct dma_chan *fsl_asrc_get_dma_channel(struct fsl_asrc_pair *pair, bool dir);
+int fsl_asrc_request_pair(int channels, struct fsl_asrc_pair *pair);
+void fsl_asrc_release_pair(struct fsl_asrc_pair *pair);
+
#endif /* _FSL_ASRC_H */
diff --git a/sound/soc/fsl/fsl_asrc_dma.c b/sound/soc/fsl/fsl_asrc_dma.c
index 01052a0808b0..7712970aeb28 100644
--- a/sound/soc/fsl/fsl_asrc_dma.c
+++ b/sound/soc/fsl/fsl_asrc_dma.c
@@ -16,13 +16,11 @@
#define FSL_ASRC_DMABUF_SIZE (256 * 1024)
-static const struct snd_pcm_hardware snd_imx_hardware = {
+static struct snd_pcm_hardware snd_imx_hardware = {
.info = SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE |
- SNDRV_PCM_INFO_RESUME,
+ SNDRV_PCM_INFO_MMAP_VALID,
.buffer_bytes_max = FSL_ASRC_DMABUF_SIZE,
.period_bytes_min = 128,
.period_bytes_max = 65535, /* Limited by SDMA engine */
@@ -270,12 +268,25 @@ static int fsl_asrc_dma_hw_free(struct snd_pcm_substream *substream)
static int fsl_asrc_dma_startup(struct snd_pcm_substream *substream)
{
+ bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_component *component = snd_soc_rtdcom_lookup(rtd, DRV_NAME);
+ struct snd_dmaengine_dai_dma_data *dma_data;
struct device *dev = component->dev;
struct fsl_asrc *asrc_priv = dev_get_drvdata(dev);
struct fsl_asrc_pair *pair;
+ struct dma_chan *tmp_chan = NULL;
+ u8 dir = tx ? OUT : IN;
+ bool release_pair = true;
+ int ret = 0;
+
+ ret = snd_pcm_hw_constraint_integer(substream->runtime,
+ SNDRV_PCM_HW_PARAM_PERIODS);
+ if (ret < 0) {
+ dev_err(dev, "failed to set pcm hw params periods\n");
+ return ret;
+ }
pair = kzalloc(sizeof(struct fsl_asrc_pair), GFP_KERNEL);
if (!pair)
@@ -285,11 +296,50 @@ static int fsl_asrc_dma_startup(struct snd_pcm_substream *substream)
runtime->private_data = pair;
- snd_pcm_hw_constraint_integer(substream->runtime,
- SNDRV_PCM_HW_PARAM_PERIODS);
- snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
+ /* Request a dummy pair, which will be released later.
+ * Request pair function needs channel num as input, for this
+ * dummy pair, we just request "1" channel temporarily.
+ */
+ ret = fsl_asrc_request_pair(1, pair);
+ if (ret < 0) {
+ dev_err(dev, "failed to request asrc pair\n");
+ goto req_pair_err;
+ }
- return 0;
+ /* Request a dummy dma channel, which will be released later. */
+ tmp_chan = fsl_asrc_get_dma_channel(pair, dir);
+ if (!tmp_chan) {
+ dev_err(dev, "failed to get dma channel\n");
+ ret = -EINVAL;
+ goto dma_chan_err;
+ }
+
+ dma_data = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream);
+
+ /* Refine the snd_imx_hardware according to caps of DMA. */
+ ret = snd_dmaengine_pcm_refine_runtime_hwparams(substream,
+ dma_data,
+ &snd_imx_hardware,
+ tmp_chan);
+ if (ret < 0) {
+ dev_err(dev, "failed to refine runtime hwparams\n");
+ goto out;
+ }
+
+ release_pair = false;
+ ret = snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
+
+out:
+ dma_release_channel(tmp_chan);
+
+dma_chan_err:
+ fsl_asrc_release_pair(pair);
+
+req_pair_err:
+ if (release_pair)
+ kfree(pair);
+
+ return ret;
}
static int fsl_asrc_dma_shutdown(struct snd_pcm_substream *substream)
--
2.21.0
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH V5 4/4] ASoC: fsl_asrc: Fix error with S24_3LE format bitstream in i.MX8
2019-09-26 1:29 ` [PATCH V5 4/4] ASoC: fsl_asrc: Fix error with S24_3LE format bitstream in i.MX8 Shengjiu Wang
@ 2019-09-26 1:49 ` Nicolin Chen
0 siblings, 0 replies; 6+ messages in thread
From: Nicolin Chen @ 2019-09-26 1:49 UTC (permalink / raw)
To: Shengjiu Wang
Cc: mark.rutland, devicetree, alsa-devel, lars, timur, Xiubo.Lee,
linuxppc-dev, tiwai, lgirdwood, robh+dt, perex, broonie, festevam,
linux-kernel
Just a small concern...
On Thu, Sep 26, 2019 at 09:29:51AM +0800, Shengjiu Wang wrote:
> static int fsl_asrc_dma_startup(struct snd_pcm_substream *substream)
> {
> +
> + release_pair = false;
> + ret = snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
This set_runtime_hwparams() always returns 0 for now, but if
one day it changes and it fails here, kfree() will be still
ignored although the startup() gets error-out.
We could avoid this if we continue to ignore the return value
like the current code. Or we may check ret at kfree() also?
> +
> +out:
> + dma_release_channel(tmp_chan);
> +
> +dma_chan_err:
> + fsl_asrc_release_pair(pair);
> +
> +req_pair_err:
> + if (release_pair)
> + kfree(pair);
> +
> + return ret;
> }
^ permalink raw reply [flat|nested] 6+ messages in thread