* PowerPC 8266 ADS-PCI(CPM8260) SCC (UART/Ethernet Mode) and SMC in UART mode
@ 2006-06-06 14:50 Aung Soe
0 siblings, 0 replies; only message in thread
From: Aung Soe @ 2006-06-06 14:50 UTC (permalink / raw)
To: linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 705 bytes --]
Dear All
I am working on PowerPC 8266 ADS-PCI board
with Montavista Linux with 2.4.20 Kernel to make SCC1, SMC 1& 2
in UART mode, SCC2, 3 & 4 in Ethernet mode, and FCC 2 in Fast
Ethernet Mode; all in NMSI and not TDM. The drivers provided with
2.4.20 Linux on Power PC were refered and reused.
http://lxr.linux.no/source/arch/ppc/8260_io/?v=2.4.20;a=ppc
When there are only 3 SCCs used in Ethernet mode and the last
SCC in UART mode then the system works well.
But when 2 more SMC are added to the UART serial driver, the SCC
Ethernet network driver is not working after all ports working for a while.
I will be appreciate to hear any pointers and hints.
Thanks in advance.
Sincerley
Aung
[-- Attachment #2: Type: text/html, Size: 1292 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-06-06 14:57 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-06-06 14:50 PowerPC 8266 ADS-PCI(CPM8260) SCC (UART/Ethernet Mode) and SMC in UART mode Aung Soe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).