Re: 2.6.24 for mpc8458amc

["maxime louvel" <m.louvel@gmail.com>]

[-- Attachment #1: Type: text/plain, Size: 1613 bytes --]

Hi again,

this time I have tried to compile the kernel, with an embedded compiler on
the board.
here is the result...

....
  BOOTAS  arch/powerpc/boot/ps3-hvcall.o
  BOOTCC  arch/powerpc/boot/ps3.o
  BOOTCC  arch/powerpc/boot/treeboot-bamboo.o
  BOOTCC  arch/powerpc/boot/cuboot-8xx.o
  BOOTCC  arch/powerpc/boot/cuboot-pq2.o
  BOOTCC  arch/powerpc/boot/cuboot-sequoia.o
  BOOTCC  arch/powerpc/boot/treeboot-walnut.o
Assembler messages:
Error: Internal assembler error for instruction icbt
Internal error, aborting at ../../gas/config/tc-ppc.c line 1300 in
ppc_setup_opcodes
Please report this bug.
make[2]: *** [arch/powerpc/boot/treeboot-walnut.o] Error 2
make[1]: *** [uImage] Error 2
make: *** [sub-make] Error 2

any idea ?

cheers,
Maxime

On Feb 19, 2008 2:57 PM, Jon Loeliger <jdl@freescale.com> wrote:

> maxime louvel wrote:
> > Thanks for your answer,
> >
> > I am going to check this ppc / powerpc things.
> > I should use the architecture powerpc, don't I?
>
> ARCH == ppc is scheduled for _removal_ from the
> entire Kernel source base is just about 4 months.
> Feel free to move the deck chairs around. :-)
>
> > I'm not really sure I have understand what do you want to do with a
> > BDI-2000.
>
> Perhaps, for starters, you read "Building Embedded Linux Systems"
> as found here:
>    http://www.oreilly.com/catalog/belinuxsys/
>
> > I access the cards through a serial line directly.
>
> Of course.  But when you get no information there,
> you might try a different interface.
>
> jdl
>



-- 
Maxime Louvel
0044 7964 5555 80
43 Allen road
Whitemore reans
WV60AW Wolverhampton
United Kingdom

[-- Attachment #2: Type: text/html, Size: 2261 bytes --]