From: Sam Bobroff <sbobroff@linux.ibm.com>
To: linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v2 07/13] powerpc/eeh: Clean up pci_ers_result handling
Date: Fri, 25 May 2018 13:11:34 +1000 [thread overview]
Message-ID: <e638159f9e6dfc4931f5164220741dd99bb4c0c7.1527217866.git.sbobroff@linux.ibm.com> (raw)
In-Reply-To: <cover.1527217866.git.sbobroff@linux.ibm.com>
In-Reply-To: <cover.1527217866.git.sbobroff@linux.ibm.com>
As EEH event handling progresses, a cumulative result of type
pci_ers_result is built up by (some of) the eeh_report_*() functions
using either:
if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
if (*res == PCI_ERS_RESULT_NONE) *res = rc;
or:
if ((*res == PCI_ERS_RESULT_NONE) ||
(*res == PCI_ERS_RESULT_RECOVERED)) *res = rc;
if (*res == PCI_ERS_RESULT_DISCONNECT &&
rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
(Where *res is the accumulator.)
However, the intent is not immediately clear and the result in some
situations is order dependent.
Address this by assigning a priority to each result value, and always
merging to the highest priority. This renders the intent clear, and
provides a stable value for all orderings.
Signed-off-by: Sam Bobroff <sbobroff@linux.ibm.com>
---
====== v1 -> v2: ======
* Added the value, and missing newline, to some WARN()s.
* Improved name of merge_result() to pci_ers_merge_result().
* Adjusted the result priorities so that unknown doesn't overlap with _NONE.
arch/powerpc/kernel/eeh_driver.c | 36 ++++++++++++++++++++++++++----------
1 file changed, 26 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c
index 188d15c4fe3a..2d3cac584899 100644
--- a/arch/powerpc/kernel/eeh_driver.c
+++ b/arch/powerpc/kernel/eeh_driver.c
@@ -39,6 +39,29 @@ struct eeh_rmv_data {
int removed;
};
+static int eeh_result_priority(enum pci_ers_result result)
+{
+ switch (result) {
+ case PCI_ERS_RESULT_NONE: return 1;
+ case PCI_ERS_RESULT_NO_AER_DRIVER: return 2;
+ case PCI_ERS_RESULT_RECOVERED: return 3;
+ case PCI_ERS_RESULT_CAN_RECOVER: return 4;
+ case PCI_ERS_RESULT_DISCONNECT: return 5;
+ case PCI_ERS_RESULT_NEED_RESET: return 6;
+ default:
+ WARN_ONCE(1, "Unknown pci_ers_result value: %d\n", (int)result);
+ return 0;
+ }
+};
+
+static enum pci_ers_result pci_ers_merge_result(enum pci_ers_result old,
+ enum pci_ers_result new)
+{
+ if (eeh_result_priority(new) > eeh_result_priority(old))
+ return new;
+ return old;
+}
+
/**
* eeh_pcid_get - Get the PCI device driver
* @pdev: PCI device
@@ -206,9 +229,7 @@ static void *eeh_report_error(struct eeh_dev *edev, void *userdata)
rc = driver->err_handler->error_detected(dev, pci_channel_io_frozen);
- /* A driver that needs a reset trumps all others */
- if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
- if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+ *res = pci_ers_merge_result(*res, rc);
edev->in_error = true;
pci_uevent_ers(dev, PCI_ERS_RESULT_NONE);
@@ -249,9 +270,7 @@ static void *eeh_report_mmio_enabled(struct eeh_dev *edev, void *userdata)
rc = driver->err_handler->mmio_enabled(dev);
- /* A driver that needs a reset trumps all others */
- if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
- if (*res == PCI_ERS_RESULT_NONE) *res = rc;
+ *res = pci_ers_merge_result(*res, rc);
out:
eeh_pcid_put(dev);
@@ -294,10 +313,7 @@ static void *eeh_report_reset(struct eeh_dev *edev, void *userdata)
goto out;
rc = driver->err_handler->slot_reset(dev);
- if ((*res == PCI_ERS_RESULT_NONE) ||
- (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc;
- if (*res == PCI_ERS_RESULT_DISCONNECT &&
- rc == PCI_ERS_RESULT_NEED_RESET) *res = rc;
+ *res = pci_ers_merge_result(*res, rc);
out:
eeh_pcid_put(dev);
--
2.16.1.74.g9b0b1f47b
next prev parent reply other threads:[~2018-05-25 3:11 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-25 3:11 [PATCH v2 00/13] EEH refactoring 2 Sam Bobroff
2018-05-25 3:11 ` [PATCH v2 01/13] powerpc/eeh: Add eeh_max_freezes to initial EEH log line Sam Bobroff
2018-06-04 14:11 ` [v2, " Michael Ellerman
2018-05-25 3:11 ` [PATCH v2 02/13] powerpc/eeh: Add final message for successful recovery Sam Bobroff
2018-05-25 3:11 ` [PATCH v2 03/13] powerpc/eeh: Fix use-after-release of EEH driver Sam Bobroff
2018-05-25 3:11 ` [PATCH v2 04/13] powerpc/eeh: Remove unused eeh_pcid_name() Sam Bobroff
2018-05-25 3:11 ` [PATCH v2 05/13] powerpc/eeh: Strengthen types of eeh traversal functions Sam Bobroff
2018-05-25 3:11 ` [PATCH v2 06/13] powerpc/eeh: Add message when PE processing at parent Sam Bobroff
2018-05-25 3:11 ` Sam Bobroff [this message]
2018-06-01 15:40 ` [PATCH v2 07/13] powerpc/eeh: Clean up pci_ers_result handling Michael Ellerman
2018-06-04 1:28 ` Sam Bobroff
2018-06-04 9:43 ` Michael Ellerman
2018-05-25 3:11 ` [PATCH v2 08/13] powerpc/eeh: Introduce eeh_for_each_pe() Sam Bobroff
2018-05-25 3:11 ` [PATCH v2 09/13] powerpc/eeh: Introduce eeh_edev_actionable() Sam Bobroff
2018-05-25 3:11 ` [PATCH v2 10/13] powerpc/eeh: Introduce eeh_set_channel_state() Sam Bobroff
2018-05-25 3:11 ` [PATCH v2 11/13] powerpc/eeh: Introduce eeh_set_irq_state() Sam Bobroff
2018-05-25 3:11 ` [PATCH v2 12/13] powerpc/eeh: Cleaner handling of EEH_DEV_NO_HANDLER Sam Bobroff
2018-05-25 3:11 ` [PATCH v2 13/13] powerpc/eeh: Refactor report functions Sam Bobroff
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e638159f9e6dfc4931f5164220741dd99bb4c0c7.1527217866.git.sbobroff@linux.ibm.com \
--to=sbobroff@linux.ibm.com \
--cc=linuxppc-dev@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).