[PATCH 2/6 v2] powerpc/qe: update risc allocation for QE

[PATCH 2/6 v2] powerpc/qe: update risc allocation for QE

[Haiying Wang]

Change the RISC allocation to macros instead of enum, add function to read the
number of risc engines from the new property "fsl,qe-num-riscs" under qe node
in dts. Add new property "fsl,qe-num-riscs" description in qe.txt

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
---
v2 change: rename the new property to "fsl,qe-num-riscs" and move this node to
Required section in qe.txt.
 .../powerpc/dts-bindings/fsl/cpm_qe/qe.txt         |    1 +
 arch/powerpc/include/asm/qe.h                      |   18 ++++++++----
 arch/powerpc/sysdev/qe_lib/qe.c                    |   28 ++++++++++++++++++++
 3 files changed, 41 insertions(+), 6 deletions(-)

diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
index 78790d5..39b5d1f 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
@@ -17,6 +17,7 @@ Required properties:
 - model : precise model of the QE, Can be "QE", "CPM", or "CPM2"
 - reg : offset and length of the device registers.
 - bus-frequency : the clock frequency for QUICC Engine.
+- fsl,qe-num-riscs: define how many RISC engines the QE has.
 
 Recommended properties
 - brg-frequency : the internal clock source frequency for baud-rate
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 2701753..60314ef 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -152,6 +152,8 @@ unsigned int qe_get_brg_clk(void);
 int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
 int qe_get_snum(void);
 void qe_put_snum(u8 snum);
+unsigned int qe_get_num_of_risc(void);
+
 /* we actually use cpm_muram implementation, define this for convenience */
 #define qe_muram_init cpm_muram_init
 #define qe_muram_alloc cpm_muram_alloc
@@ -231,12 +233,16 @@ struct qe_bd {
 #define QE_ALIGNMENT_OF_PRAM	64
 
 /* RISC allocation */
-enum qe_risc_allocation {
-	QE_RISC_ALLOCATION_RISC1 = 1,	/* RISC 1 */
-	QE_RISC_ALLOCATION_RISC2 = 2,	/* RISC 2 */
-	QE_RISC_ALLOCATION_RISC1_AND_RISC2 = 3	/* Dynamically choose
-						   RISC 1 or RISC 2 */
-};
+#define QE_RISC_ALLOCATION_RISC1	0x1  /* RISC 1 */
+#define QE_RISC_ALLOCATION_RISC2	0x2  /* RISC 2 */
+#define QE_RISC_ALLOCATION_RISC3	0x4  /* RISC 3 */
+#define QE_RISC_ALLOCATION_RISC4	0x8  /* RISC 4 */
+#define QE_RISC_ALLOCATION_RISC1_AND_RISC2	(QE_RISC_ALLOCATION_RISC1 | \
+						 QE_RISC_ALLOCATION_RISC2)
+#define QE_RISC_ALLOCATION_FOUR_RISCS	(QE_RISC_ALLOCATION_RISC1 | \
+					 QE_RISC_ALLOCATION_RISC2 | \
+					 QE_RISC_ALLOCATION_RISC3 | \
+					 QE_RISC_ALLOCATION_RISC4)
 
 /* QE extended filtering Table Lookup Key Size */
 enum qe_fltr_tbl_lookup_key_size {
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 01bce37..2533677 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -575,3 +575,31 @@ struct qe_firmware_info *qe_get_firmware_info(void)
 }
 EXPORT_SYMBOL(qe_get_firmware_info);
 
+unsigned int qe_get_num_of_risc(void)
+{
+	struct device_node *qe;
+	int size;
+	unsigned int num_of_risc = 0;
+	const u32 *prop;
+
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!qe) {
+		/* Older devices trees did not have an "fsl,qe"
+		 * compatible property, so we need to look for
+		 * the QE node by name.
+		 */
+		qe = of_find_node_by_type(NULL, "qe");
+		if (!qe)
+			return num_of_risc;
+	}
+
+	prop = of_get_property(qe, "fsl,qe-num-riscs", &size);
+	if (prop && size == sizeof(*prop))
+		num_of_risc = *prop;
+
+	of_node_put(qe);
+
+	return num_of_risc;
+}
+EXPORT_SYMBOL(qe_get_num_of_risc);
+
-- 
1.6.0.2

[PATCH 4/6 v2] powerpc/qe: update QE Serial Number

[Haiying Wang]

The latest QE chip may have more Serial Number(SNUM)s of thread to use. We will
get the number of SNUMs from device tree by reading the new property
"fsl,qe-num-snums", and set 28 as the default number of SNUMs so that it is
compatible with the old QE chips' device trees which don't have this new
property. The macro QE_NUM_OF_SNUM is defined as the maximum number in QE snum
table which is 256.
Also we update the snum_init[] array with 18 more new SNUMs which are
confirmed to be useful on new chip.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
---
v2 change: rename the new property as "fsl,qe-num-snums" and move it to Required
section in qe.txt
 .../powerpc/dts-bindings/fsl/cpm_qe/qe.txt         |    2 +
 arch/powerpc/include/asm/qe.h                      |    3 +-
 arch/powerpc/sysdev/qe_lib/qe.c                    |   47 ++++++++++++++++++--
 3 files changed, 47 insertions(+), 5 deletions(-)

diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
index 39b5d1f..6e37be1 100644
--- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt
@@ -18,6 +18,8 @@ Required properties:
 - reg : offset and length of the device registers.
 - bus-frequency : the clock frequency for QUICC Engine.
 - fsl,qe-num-riscs: define how many RISC engines the QE has.
+- fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the
+  threads.
 
 Recommended properties
 - brg-frequency : the internal clock source frequency for baud-rate
diff --git a/arch/powerpc/include/asm/qe.h b/arch/powerpc/include/asm/qe.h
index 60314ef..e0faf33 100644
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -22,7 +22,7 @@
 #include <asm/cpm.h>
 #include <asm/immap_qe.h>
 
-#define QE_NUM_OF_SNUM	28
+#define QE_NUM_OF_SNUM	256	/* There are 256 serial number in QE */
 #define QE_NUM_OF_BRGS	16
 #define QE_NUM_OF_PORTS	1024
 
@@ -153,6 +153,7 @@ int qe_setbrg(enum qe_clock brg, unsigned int rate, unsigned int multiplier);
 int qe_get_snum(void);
 void qe_put_snum(u8 snum);
 unsigned int qe_get_num_of_risc(void);
+unsigned int qe_get_num_of_snums(void);
 
 /* we actually use cpm_muram implementation, define this for convenience */
 #define qe_muram_init cpm_muram_init
diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c
index 2533677..b28b0e5 100644
--- a/arch/powerpc/sysdev/qe_lib/qe.c
+++ b/arch/powerpc/sysdev/qe_lib/qe.c
@@ -61,6 +61,7 @@ struct qe_immap __iomem *qe_immr;
 EXPORT_SYMBOL(qe_immr);
 
 static struct qe_snum snums[QE_NUM_OF_SNUM];	/* Dynamically allocated SNUMs */
+static unsigned int qe_num_of_snum;
 
 static phys_addr_t qebase = -1;
 
@@ -264,10 +265,14 @@ static void qe_snums_init(void)
 		0x04, 0x05, 0x0C, 0x0D, 0x14, 0x15, 0x1C, 0x1D,
 		0x24, 0x25, 0x2C, 0x2D, 0x34, 0x35, 0x88, 0x89,
 		0x98, 0x99, 0xA8, 0xA9, 0xB8, 0xB9, 0xC8, 0xC9,
-		0xD8, 0xD9, 0xE8, 0xE9,
+		0xD8, 0xD9, 0xE8, 0xE9, 0x08, 0x09, 0x18, 0x19,
+		0x28, 0x29, 0x38, 0x39, 0x48, 0x49, 0x58, 0x59,
+		0x68, 0x69, 0x78, 0x79, 0x80, 0x81,
 	};
 
-	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+	qe_num_of_snum = qe_get_num_of_snums();
+
+	for (i = 0; i < qe_num_of_snum; i++) {
 		snums[i].num = snum_init[i];
 		snums[i].state = QE_SNUM_STATE_FREE;
 	}
@@ -280,7 +285,7 @@ int qe_get_snum(void)
 	int i;
 
 	spin_lock_irqsave(&qe_lock, flags);
-	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+	for (i = 0; i < qe_num_of_snum; i++) {
 		if (snums[i].state == QE_SNUM_STATE_FREE) {
 			snums[i].state = QE_SNUM_STATE_USED;
 			snum = snums[i].num;
@@ -297,7 +302,7 @@ void qe_put_snum(u8 snum)
 {
 	int i;
 
-	for (i = 0; i < QE_NUM_OF_SNUM; i++) {
+	for (i = 0; i < qe_num_of_snum; i++) {
 		if (snums[i].num == snum) {
 			snums[i].state = QE_SNUM_STATE_FREE;
 			break;
@@ -603,3 +608,37 @@ unsigned int qe_get_num_of_risc(void)
 }
 EXPORT_SYMBOL(qe_get_num_of_risc);
 
+unsigned int qe_get_num_of_snums(void)
+{
+	struct device_node *qe;
+	int size;
+	unsigned int num_of_snums;
+	const u32 *prop;
+
+	num_of_snums = 28; /* The default number of snum for threads is 28 */
+	qe = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!qe) {
+		/* Older devices trees did not have an "fsl,qe"
+		 * compatible property, so we need to look for
+		 * the QE node by name.
+		 */
+		qe = of_find_node_by_type(NULL, "qe");
+		if (!qe)
+			return num_of_snums;
+	}
+
+	prop = of_get_property(qe, "fsl,qe-num-snums", &size);
+	if (prop && size == sizeof(*prop)) {
+		num_of_snums = *prop;
+		if ((num_of_snums < 28) || (num_of_snums > QE_NUM_OF_SNUM)) {
+			/* No QE ever has fewer than 28 SNUMs */
+			pr_err("QE: number of snum is invalid\n");
+			return -EINVAL;
+		}
+	}
+
+	of_node_put(qe);
+
+	return num_of_snums;
+}
+EXPORT_SYMBOL(qe_get_num_of_snums);
-- 
1.6.0.2

[PATCH 5/6 v2] net/ucc_geth: Assign six threads to Rx for UEC

[Haiying Wang]

in the case the QE has 46 SNUMs for the threads to support four UCC Ethernet at
1000Base-T simultaneously.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
---
v2 change: Add comments for the Rx threads change.
 drivers/net/ucc_geth.c |   10 +++++++++-
 1 files changed, 9 insertions(+), 1 deletions(-)

diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 44f8392..1cb2710 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -3702,7 +3702,15 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 		ug_info->uf_info.utfet = UCC_GETH_UTFET_GIGA_INIT;
 		ug_info->uf_info.utftt = UCC_GETH_UTFTT_GIGA_INIT;
 		ug_info->numThreadsTx = UCC_GETH_NUM_OF_THREADS_4;
-		ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
+
+		/* If QE's snum number is 46 which means we need to support
+		 * 4 UECs at 1000Base-T simultaneously, we need to allocate
+		 * more Threads to Rx.
+		 */
+		if (qe_get_num_of_snums() == 46)
+			ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_6;
+		else
+			ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
 	}
 
 	if (netif_msg_probe(&debug))
-- 
1.6.0.2

[PATCH 6/6 v2] powerpc/85xx: Add MPC8569MDS board support

[Haiying Wang]

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
---
v2 change: rename "num-riscs" to "fsl,qe-num-riscs", and "num-snums" to 
"fsl,qe-num-snums".

 arch/powerpc/boot/dts/mpc8569mds.dts      |  514 +++++++++++++++++++++++++++++
 arch/powerpc/platforms/85xx/mpc85xx_mds.c |   23 ++
 2 files changed, 537 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/mpc8569mds.dts

diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
new file mode 100644
index 0000000..3ddd8c3
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -0,0 +1,514 @@
+/*
+ * MPC8569E MDS Device Tree Source
+ *
+ * Copyright (C) 2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MPC8569EMDS";
+	compatible = "fsl,MPC8569EMDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		ethernet3 = &enet3;
+		pci1 = &pci1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8569@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x8000>;		// L1, 32K
+			i-cache-size = <0x8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@e0005000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc8569-elbc", "fsl,elbc", "simple-bus";
+		reg = <0 0xe0005000 0 0x1000>;
+		interrupt = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0x0 0x0 0xfe000000 0x02000000
+			  0x1 0x0 0xf8000000 0x00008000
+			  0x2 0x0 0xf0000000 0x04000000
+			  0x4 0x0 0xf8008000 0x00008000
+			  0x5 0x0 0xf8010000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x02000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		bcsr@1,0 {
+			compatible = "fsl,mpc8569mds-bcsr";
+			reg = <1 0 0x8000>;
+		};
+
+		pib@4,0 {
+			compatible = "fsl,mpc8569mds-pib";
+			reg = <4 0 0x8000>;
+		};
+
+		pib@5,0 {
+			compatible = "fsl,mpc8569mds-pib";
+			reg = <5 0 0x8000>;
+		};
+	};
+
+	soc@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,mpc8569-immr", "simple-bus";
+		ranges = <0x0 0xe0000000 0x100000>;
+		reg = <0xe0000000 0x1000>;
+		bus-frequency = <0>;
+
+		ecm-law@0 {
+			compatible = "fsl,ecm-law";
+			reg = <0x0 0x1000>;
+			fsl,num-laws = <10>;
+		};
+
+		ecm@1000 {
+			compatible = "fsl,mpc8569-ecm", "fsl,ecm";
+			reg = <0x1000 0x1000>;
+			interrupts = <17 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8569-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			rtc@68 {
+				compatible = "dallas,ds1374";
+				reg = <0x68>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8569-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x80000>;	// L2, 512K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,mpc8569-dma", "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,mpc8569-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,mpc8569-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,mpc8569-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,mpc8569-dma-channel",
+						"fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				"fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0x9fe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+
+		global-utilities@e0000 {
+			compatible = "fsl,mpc8569-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		par_io@e0100 {
+			reg = <0xe0100 0x100>;
+			device_type = "par_io";
+			num-ports = <7>;
+
+			pio1: ucc_pin@01 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x0b 0x2  0x0  0x1  0x0	/* CLK12*/
+					0x0  0x0  0x1  0x0  0x3  0x0	/* ENET1_TXD0_SER1_TXD0 */
+					0x0  0x1  0x1  0x0  0x3  0x0	/* ENET1_TXD1_SER1_TXD1 */
+					0x0  0x2  0x1  0x0  0x1  0x0	/* ENET1_TXD2_SER1_TXD2 */
+					0x0  0x3  0x1  0x0  0x2  0x0	/* ENET1_TXD3_SER1_TXD3 */
+					0x0  0x6  0x2  0x0  0x3  0x0	/* ENET1_RXD0_SER1_RXD0	*/
+					0x0  0x7  0x2  0x0  0x1  0x0	/* ENET1_RXD1_SER1_RXD1	*/
+					0x0  0x8  0x2  0x0  0x2  0x0	/* ENET1_RXD2_SER1_RXD2	*/
+					0x0  0x9  0x2  0x0  0x2  0x0	/* ENET1_RXD3_SER1_RXD3	*/
+					0x0  0x4  0x1  0x0  0x2  0x0	/* ENET1_TX_EN_SER1_RTS_B */
+					0x0  0xc  0x2  0x0  0x3  0x0	/* ENET1_RX_DV_SER1_CTS_B */
+					0x2  0x8  0x2  0x0  0x1  0x0	/* ENET1_GRXCLK	*/
+					0x2  0x14 0x1  0x0  0x2  0x0>;	/* ENET1_GTXCLK	*/
+			};
+
+			pio2: ucc_pin@02 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x10 0x2  0x0  0x3  0x0	/* CLK17 */
+					0x0  0xe  0x1  0x0  0x2  0x0	/* ENET2_TXD0_SER2_TXD0 */
+					0x0  0xf  0x1  0x0  0x2  0x0	/* ENET2_TXD1_SER2_TXD1 */
+					0x0  0x10 0x1  0x0  0x1  0x0	/* ENET2_TXD2_SER2_TXD2 */
+					0x0  0x11 0x1  0x0  0x1  0x0	/* ENET2_TXD3_SER2_TXD3 */
+					0x0  0x14 0x2  0x0  0x2  0x0	/* ENET2_RXD0_SER2_RXD0	*/
+					0x0  0x15 0x2  0x0  0x1  0x0	/* ENET2_RXD1_SER2_RXD1	*/
+					0x0  0x16 0x2  0x0  0x1  0x0	/* ENET2_RXD2_SER2_RXD2	*/
+					0x0  0x17 0x2  0x0  0x1  0x0	/* ENET2_RXD3_SER2_RXD3	*/
+					0x0  0x12 0x1  0x0  0x2  0x0	/* ENET2_TX_EN_SER2_RTS_B */
+					0x0  0x1a 0x2  0x0  0x3  0x0	/* ENET2_RX_DV_SER2_CTS_B */
+					0x2  0x3  0x2  0x0  0x1  0x0	/* ENET2_GRXCLK	*/
+					0x2  0x2 0x1  0x0  0x2  0x0>;	/* ENET2_GTXCLK	*/
+			};
+
+			pio3: ucc_pin@03 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x0b 0x2  0x0  0x1  0x0	/* CLK12*/
+					0x0  0x1d 0x1  0x0  0x2  0x0	/* ENET3_TXD0_SER3_TXD0 */
+					0x0  0x1e 0x1  0x0  0x3  0x0	/* ENET3_TXD1_SER3_TXD1 */
+					0x0  0x1f 0x1  0x0  0x2  0x0	/* ENET3_TXD2_SER3_TXD2 */
+					0x1  0x0  0x1  0x0  0x3  0x0	/* ENET3_TXD3_SER3_TXD3 */
+					0x1  0x3  0x2  0x0  0x3  0x0	/* ENET3_RXD0_SER3_RXD0	*/
+					0x1  0x4  0x2  0x0  0x1  0x0	/* ENET3_RXD1_SER3_RXD1	*/
+					0x1  0x5  0x2  0x0  0x2  0x0	/* ENET3_RXD2_SER3_RXD2	*/
+					0x1  0x6  0x2  0x0  0x3  0x0	/* ENET3_RXD3_SER3_RXD3	*/
+					0x1  0x1  0x1  0x0  0x1  0x0	/* ENET3_TX_EN_SER3_RTS_B */
+					0x1  0x9  0x2  0x0  0x3  0x0	/* ENET3_RX_DV_SER3_CTS_B */
+					0x2  0x9  0x2  0x0  0x2  0x0	/* ENET3_GRXCLK	*/
+					0x2  0x19 0x1  0x0  0x2  0x0>;	/* ENET3_GTXCLK	*/
+			};
+
+			pio4: ucc_pin@04 {
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					0x2  0x1f 0x1  0x0  0x1  0x0	/* QE_MUX_MDC */
+					0x2  0x1e 0x3  0x0  0x2  0x0	/* QE_MUX_MDIO */
+					0x2  0x10 0x2  0x0  0x3  0x0	/* CLK17 */
+					0x1  0xc  0x1  0x0  0x2  0x0	/* ENET4_TXD0_SER4_TXD0 */
+					0x1  0xd  0x1  0x0  0x2  0x0	/* ENET4_TXD1_SER4_TXD1 */
+					0x1  0xe  0x1  0x0  0x1  0x0	/* ENET4_TXD2_SER4_TXD2 */
+					0x1  0xf  0x1  0x0  0x2  0x0	/* ENET4_TXD3_SER4_TXD3 */
+					0x1  0x12 0x2  0x0  0x2  0x0	/* ENET4_RXD0_SER4_RXD0	*/
+					0x1  0x13 0x2  0x0  0x1  0x0	/* ENET4_RXD1_SER4_RXD1	*/
+					0x1  0x14 0x2  0x0  0x1  0x0	/* ENET4_RXD2_SER4_RXD2	*/
+					0x1  0x15 0x2  0x0  0x2  0x0	/* ENET4_RXD3_SER4_RXD3	*/
+					0x1  0x10 0x1  0x0  0x2  0x0	/* ENET4_TX_EN_SER4_RTS_B */
+					0x1  0x18 0x2  0x0  0x3  0x0	/* ENET4_RX_DV_SER4_CTS_B */
+					0x2  0x11 0x2  0x0  0x2  0x0	/* ENET4_GRXCLK	*/
+					0x2  0x18 0x1  0x0  0x2  0x0>;	/* ENET4_GTXCLK	*/
+			};
+		};
+	};
+
+	qe@e0080000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		compatible = "fsl,qe";
+		ranges = <0x0 0xe0080000 0x40000>;
+		reg = <0xe0080000 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+		fsl,qe-num-riscs = <4>;
+		fsl,qe-num-snums = <46>;
+
+		qeic: interrupt-controller@80 {
+			interrupt-controller;
+			compatible = "fsl,qe-ic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x80 0x80>;
+			interrupts = <46 2 46 2>; //high:30 low:30
+			interrupt-parent = <&mpic>;
+		};
+
+		spi@4c0 {
+			cell-index = <0>;
+			compatible = "fsl,spi";
+			reg = <0x4c0 0x40>;
+			interrupts = <2>;
+			interrupt-parent = <&qeic>;
+			mode = "cpu";
+		};
+
+		spi@500 {
+			cell-index = <1>;
+			compatible = "fsl,spi";
+			reg = <0x500 0x40>;
+			interrupts = <1>;
+			interrupt-parent = <&qeic>;
+			mode = "cpu";
+		};
+
+		enet0: ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <1>;
+			reg = <0x2000 0x200>;
+			interrupts = <32>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk12";
+			pio-handle = <&pio1>;
+			phy-handle = <&qe_phy0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2120 0x18>;
+			compatible = "fsl,ucc-mdio";
+
+			qe_phy0: ethernet-phy@07 {
+				interrupt-parent = <&mpic>;
+				interrupts = <1 1>;
+				reg = <0x7>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy1: ethernet-phy@01 {
+				interrupt-parent = <&mpic>;
+				interrupts = <2 1>;
+				reg = <0x1>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy2: ethernet-phy@02 {
+				interrupt-parent = <&mpic>;
+				interrupts = <3 1>;
+				reg = <0x2>;
+				device_type = "ethernet-phy";
+			};
+			qe_phy3: ethernet-phy@03 {
+				interrupt-parent = <&mpic>;
+				interrupts = <4 1>;
+				reg = <0x3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		enet2: ucc@2200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <3>;
+			reg = <0x2200 0x200>;
+			interrupts = <34>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk12";
+			pio-handle = <&pio3>;
+			phy-handle = <&qe_phy2>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ucc@3000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <2>;
+			reg = <0x3000 0x200>;
+			interrupts = <33>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk17";
+			pio-handle = <&pio2>;
+			phy-handle = <&qe_phy1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet3: ucc@3200 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			cell-index = <4>;
+			reg = <0x3200 0x200>;
+			interrupts = <35>;
+			interrupt-parent = <&qeic>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			rx-clock-name = "none";
+			tx-clock-name = "clk17";
+			pio-handle = <&pio4>;
+			phy-handle = <&qe_phy3>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		muram@10000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe-muram", "fsl,cpm-muram";
+			ranges = <0x0 0x10000 0x20000>;
+
+			data-only@0 {
+				compatible = "fsl,qe-muram-data",
+					     "fsl,cpm-muram-data";
+				reg = <0x0 0x20000>;
+			};
+		};
+
+	};
+
+	/* PCI Express */
+	pci1: pcie@e000a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0xe000a000 0x1000>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 (PEX) */
+			00000 0x0 0x0 0x1 &mpic 0x0 0x1
+			00000 0x0 0x0 0x2 &mpic 0x1 0x1
+			00000 0x0 0x0 0x3 &mpic 0x2 0x1
+			00000 0x0 0x0 0x4 &mpic 0x3 0x1>;
+
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
+			  0x1000000 0x0 0x00000000 0xe2800000 0x0 0x00800000>;
+		clock-frequency = <33333333>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x10000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x800000>;
+		};
+	};
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index d34d29a..b2c0a43 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -259,6 +259,7 @@ static int __init board_fixups(void)
 	return 0;
 }
 machine_arch_initcall(mpc8568_mds, board_fixups);
+machine_arch_initcall(mpc8569_mds, board_fixups);
 
 static struct of_device_id mpc85xx_ids[] = {
 	{ .type = "soc", },
@@ -278,6 +279,7 @@ static int __init mpc85xx_publish_devices(void)
 	return 0;
 }
 machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
+machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
 
 static void __init mpc85xx_mds_pic_init(void)
 {
@@ -335,3 +337,24 @@ define_machine(mpc8568_mds) {
 	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
 #endif
 };
+
+static int __init mpc8569_mds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,MPC8569EMDS");
+}
+
+define_machine(mpc8569_mds) {
+	.name		= "MPC8569 MDS",
+	.probe		= mpc8569_mds_probe,
+	.setup_arch	= mpc85xx_mds_setup_arch,
+	.init_IRQ	= mpc85xx_mds_pic_init,
+	.get_irq	= mpic_get_irq,
+	.restart	= fsl_rstcr_restart,
+	.calibrate_decr	= generic_calibrate_decr,
+	.progress	= udbg_progress,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+};
-- 
1.6.0.2

[PATCH] powerpc/85xx: add new qe properties for QE based chips

[Haiying Wang]

Add fsl,qe-num-riscs and fsl,qe-num-snums to all the devices trees which have qe
node.

Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
---
 arch/powerpc/boot/dts/mpc832x_mds.dts |    2 ++
 arch/powerpc/boot/dts/mpc832x_rdb.dts |    2 ++
 arch/powerpc/boot/dts/mpc836x_mds.dts |    2 ++
 arch/powerpc/boot/dts/mpc836x_rdk.dts |    2 ++
 arch/powerpc/boot/dts/mpc8568mds.dts  |    2 ++
 5 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts
index 6b319f5..436c9c6 100644
--- a/arch/powerpc/boot/dts/mpc832x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc832x_mds.dts
@@ -249,6 +249,8 @@
 		reg = <0xe0100000 0x480>;
 		brg-frequency = <0>;
 		bus-frequency = <198000000>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
 
 		muram@10000 {
 			#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts
index 4c0c249..9a0952f 100644
--- a/arch/powerpc/boot/dts/mpc832x_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts
@@ -221,6 +221,8 @@
 		reg = <0xe0100000 0x480>;
 		brg-frequency = <0>;
 		bus-frequency = <198000000>;
+		fsl,qe-num-riscs = <1>;
+		fsl,qe-num-snums = <28>;
 
 		muram@10000 {
  			#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts
index 1207ec8..39ff4c8 100644
--- a/arch/powerpc/boot/dts/mpc836x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc836x_mds.dts
@@ -289,6 +289,8 @@
 		reg = <0xe0100000 0x480>;
 		brg-frequency = <0>;
 		bus-frequency = <396000000>;
+		fsl,qe-num-riscs = <2>;
+		fsl,qe-num-snums = <28>;
 
 		muram@10000 {
  			#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc836x_rdk.dts b/arch/powerpc/boot/dts/mpc836x_rdk.dts
index 37b7895..6315d6f 100644
--- a/arch/powerpc/boot/dts/mpc836x_rdk.dts
+++ b/arch/powerpc/boot/dts/mpc836x_rdk.dts
@@ -198,6 +198,8 @@
 			clock-frequency = <0>;
 			bus-frequency = <0>;
 			brg-frequency = <0>;
+			fsl,qe-num-riscs = <2>;
+			fsl,qe-num-snums = <28>;
 
 			muram@10000 {
 				#address-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index d2fb639..fcab168 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -362,6 +362,8 @@
 		reg = <0xe0080000 0x480>;
 		brg-frequency = <0>;
 		bus-frequency = <396000000>;
+		fsl,qe-num-riscs = <2>;
+		fsl,qe-num-snums = <28>;
 
 		muram@10000 {
  			#address-cells = <1>;
-- 
1.6.0.2

Re: [PATCH] powerpc/85xx: add new qe properties for QE based chips

[Timur Tabi]

On Fri, May 1, 2009 at 2:40 PM, Haiying Wang <Haiying.Wang@freescale.com> wrote:
> Add fsl,qe-num-riscs and fsl,qe-num-snums to all the devices trees which have qe
> node.
>
> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

Acked-by: Timur Tabi <timur@freescale.com>

-- 
Timur Tabi
Linux kernel developer at Freescale

Re: [PATCH 4/6 v2] powerpc/qe: update QE Serial Number

[Timur Tabi]

On Fri, May 1, 2009 at 2:40 PM, Haiying Wang <Haiying.Wang@freescale.com> wrote:
> The latest QE chip may have more Serial Number(SNUM)s of thread to use. We will
> get the number of SNUMs from device tree by reading the new property
> "fsl,qe-num-snums", and set 28 as the default number of SNUMs so that it is
> compatible with the old QE chips' device trees which don't have this new
> property. The macro QE_NUM_OF_SNUM is defined as the maximum number in QE snum
> table which is 256.
> Also we update the snum_init[] array with 18 more new SNUMs which are
> confirmed to be useful on new chip.
>
> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

Acked-by: Timur Tabi <timur@freescale.com>

-- 
Timur Tabi
Linux kernel developer at Freescale

Re: [PATCH 2/6 v2] powerpc/qe: update risc allocation for QE

[Timur Tabi]

On Fri, May 1, 2009 at 2:40 PM, Haiying Wang <Haiying.Wang@freescale.com> wrote:
> Change the RISC allocation to macros instead of enum, add function to read the
> number of risc engines from the new property "fsl,qe-num-riscs" under qe node
> in dts. Add new property "fsl,qe-num-riscs" description in qe.txt
>
> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

Acked-by: Timur Tabi <timur@freescale.com>

-- 
Timur Tabi
Linux kernel developer at Freescale

Re: [PATCH 5/6 v2] net/ucc_geth: Assign six threads to Rx for UEC

[Timur Tabi]

On Fri, May 1, 2009 at 2:40 PM, Haiying Wang <Haiying.Wang@freescale.com> wrote:
> in the case the QE has 46 SNUMs for the threads to support four UCC Ethernet at
> 1000Base-T simultaneously.
>
> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>

Acked-by: Timur Tabi <timur@freescale.com>

FYI, this should have been cross-posted to the netdev mailing list.

-- 
Timur Tabi
Linux kernel developer at Freescale

Re: [PATCH 5/6 v2] net/ucc_geth: Assign six threads to Rx for UEC

[Kumar Gala]

On May 1, 2009, at 2:40 PM, Haiying Wang wrote:

> in the case the QE has 46 SNUMs for the threads to support four UCC  
> Ethernet at
> 1000Base-T simultaneously.
>
> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
> ---
> v2 change: Add comments for the Rx threads change.
> drivers/net/ucc_geth.c |   10 +++++++++-
> 1 files changed, 9 insertions(+), 1 deletions(-)

Dave,

One more patch for you to Ack and let me handle via the powerpc tree  
because of dependencies.

- k

>
>
> diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
> index 44f8392..1cb2710 100644
> --- a/drivers/net/ucc_geth.c
> +++ b/drivers/net/ucc_geth.c
> @@ -3702,7 +3702,15 @@ static int ucc_geth_probe(struct of_device*  
> ofdev, const struct of_device_id *ma
> 		ug_info->uf_info.utfet = UCC_GETH_UTFET_GIGA_INIT;
> 		ug_info->uf_info.utftt = UCC_GETH_UTFTT_GIGA_INIT;
> 		ug_info->numThreadsTx = UCC_GETH_NUM_OF_THREADS_4;
> -		ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
> +
> +		/* If QE's snum number is 46 which means we need to support
> +		 * 4 UECs at 1000Base-T simultaneously, we need to allocate
> +		 * more Threads to Rx.
> +		 */
> +		if (qe_get_num_of_snums() == 46)
> +			ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_6;
> +		else
> +			ug_info->numThreadsRx = UCC_GETH_NUM_OF_THREADS_4;
> 	}
>
> 	if (netif_msg_probe(&debug))
> -- 
> 1.6.0.2

Re: [PATCH 2/6 v2] powerpc/qe: update risc allocation for QE

[Kumar Gala]

On May 1, 2009, at 3:15 PM, Timur Tabi wrote:

> On Fri, May 1, 2009 at 2:40 PM, Haiying Wang <Haiying.Wang@freescale.com 
> > wrote:
>> Change the RISC allocation to macros instead of enum, add function  
>> to read the
>> number of risc engines from the new property "fsl,qe-num-riscs"  
>> under qe node
>> in dts. Add new property "fsl,qe-num-riscs" description in qe.txt
>>
>> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
>
> Acked-by: Timur Tabi <timur@freescale.com>

Applied to next

- k

Re: [PATCH 5/6 v2] net/ucc_geth: Assign six threads to Rx for UEC

[David Miller]

From: Kumar Gala <galak@kernel.crashing.org>
Date: Fri, 1 May 2009 16:56:19 -0500

> 
> On May 1, 2009, at 2:40 PM, Haiying Wang wrote:
> 
>> in the case the QE has 46 SNUMs for the threads to support four UCC
>> Ethernet at
>> 1000Base-T simultaneously.
>>
>> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
>> ---
>> v2 change: Add comments for the Rx threads change.
>> drivers/net/ucc_geth.c |   10 +++++++++-
>> 1 files changed, 9 insertions(+), 1 deletions(-)
> 
> Dave,
> 
> One more patch for you to Ack and let me handle via the powerpc tree
> because of dependencies.

Acked-by: David S. Miller <davem@davemloft.net>

Re: [PATCH 4/6 v2] powerpc/qe: update QE Serial Number

[Kumar Gala]

On May 1, 2009, at 2:40 PM, Haiying Wang wrote:

> The latest QE chip may have more Serial Number(SNUM)s of thread to  
> use. We will
> get the number of SNUMs from device tree by reading the new property
> "fsl,qe-num-snums", and set 28 as the default number of SNUMs so  
> that it is
> compatible with the old QE chips' device trees which don't have this  
> new
> property. The macro QE_NUM_OF_SNUM is defined as the maximum number  
> in QE snum
> table which is 256.
> Also we update the snum_init[] array with 18 more new SNUMs which are
> confirmed to be useful on new chip.
>
> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
> ---
> v2 change: rename the new property as "fsl,qe-num-snums" and move it  
> to Required
> section in qe.txt
> .../powerpc/dts-bindings/fsl/cpm_qe/qe.txt         |    2 +
> arch/powerpc/include/asm/qe.h                      |    3 +-
> arch/powerpc/sysdev/qe_lib/qe.c                    |   47 +++++++++++ 
> +++++++--
> 3 files changed, 47 insertions(+), 5 deletions(-)

applied

- k

Re: [PATCH] powerpc/85xx: add new qe properties for QE based chips

[Kumar Gala]

On May 1, 2009, at 2:40 PM, Haiying Wang wrote:

> Add fsl,qe-num-riscs and fsl,qe-num-snums to all the devices trees  
> which have qe
> node.
>
> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
> ---
> arch/powerpc/boot/dts/mpc832x_mds.dts |    2 ++
> arch/powerpc/boot/dts/mpc832x_rdb.dts |    2 ++
> arch/powerpc/boot/dts/mpc836x_mds.dts |    2 ++
> arch/powerpc/boot/dts/mpc836x_rdk.dts |    2 ++
> arch/powerpc/boot/dts/mpc8568mds.dts  |    2 ++
> 5 files changed, 10 insertions(+), 0 deletions(-)

applied to next

- k

Re: [PATCH 5/6 v2] net/ucc_geth: Assign six threads to Rx for UEC

[Kumar Gala]

On May 1, 2009, at 2:40 PM, Haiying Wang wrote:

> in the case the QE has 46 SNUMs for the threads to support four UCC  
> Ethernet at
> 1000Base-T simultaneously.
>
> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
> ---
> v2 change: Add comments for the Rx threads change.
> drivers/net/ucc_geth.c |   10 +++++++++-
> 1 files changed, 9 insertions(+), 1 deletions(-)

applied to next

- k

Re: [PATCH 6/6 v2] powerpc/85xx: Add MPC8569MDS board support

[Kumar Gala]

On May 1, 2009, at 2:40 PM, Haiying Wang wrote:

> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
> ---
> v2 change: rename "num-riscs" to "fsl,qe-num-riscs", and "num-snums"  
> to
> "fsl,qe-num-snums".
>
> arch/powerpc/boot/dts/mpc8569mds.dts      |  514 ++++++++++++++++++++ 
> +++++++++
> arch/powerpc/platforms/85xx/mpc85xx_mds.c |   23 ++
> 2 files changed, 537 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/boot/dts/mpc8569mds.dts


applied to next

- k