UNSUBSCRIBE

UNSUBSCRIBE

[Arun Kumar]

[-- Attachment #1: Type: text/plain, Size: 245 bytes --]

>
> kindly unsubscribe me from this mailing list.
>



-- 

Best Regards,
Arun


"      Not in imagined futures
               Or in remembered pasts
       But only here and only now
                   Will you find a peace that lasts        "

[-- Attachment #2: Type: text/html, Size: 668 bytes --]

unsubscribe

[Shawn Landden]

-- 
Shawn Landden

unsubscribe

[Shawn Landden]

-- 
Shawn Landden

unsubscribe

[Gary Thomas]

Sadly, after >20 years

unsubscribe

[cybin]

unsubscribe

unsubscribe

[cybin]

unsubscribe

[Deepak Pandian]

unsubscribe

[Tietz Fabian (AA-DG/PAS-ESD2)]

unsubscribe

unsubscribe

[Roberto Mantovani]

unsubscribe

[Roberto Mantovani]

-- 
Roberto Mantovani <rmantovani@automazionelogistica.it>
A&L srl - Automazione e Logistica www.automazionelogistica.it
Via Lidice, 20
40139 Bologna
Cap Sociale € 10.000 I.V.
C.F., P.IVA e registro imprese di Bologna N.02296311208

unsubscribe

[aiolos.cis90]

unsubscribe 

unsubscribe

[Frederic LEGER]

unsubscribe
 

unsubscribe

[Gao Ya'nan]

unsubscribe

unsubscribe

[Thomas Rinder]

unsubscribe 

unsubscribe

[Bietry, Ray]

[-- Attachment #1: Type: text/plain, Size: 5 bytes --]

 


[-- Attachment #2: Type: text/html, Size: 1096 bytes --]

unsubscribe

[ravi.rao]

[-- Attachment #1: Type: text/plain, Size: 698 bytes --]

Ravishankar Govindarao
RFL Electronics Inc.
E-mail : Ravi.Rao@rflelect.com
Voice: 973.334.3100 Ext. 233
Fax: 973.334.3863
 
CONFIDENTIALITY NOTE
This e-mail, including any attachments, may contain confidential and/or 
legally privileged information.  The Information is intended only for the 
use of the individual or entity named on this e-mail .  If you are not the 
intended recipient, you are hereby notified that any disclosure, copying, 
distribution, or the taking of any action in reliance on the contents of 
this transmitted Information is strictly prohibited.  Further, if you are 
not the intended recipient, please notify us by return e-mail and delete 
the Information promptly.
 
 
 

[-- Attachment #2: Type: text/html, Size: 1352 bytes --]

unsubscribe

[Usha Rani Konudula]

[-- Attachment #1: Type: text/plain, Size: 5 bytes --]

 


[-- Attachment #2: Type: text/html, Size: 3952 bytes --]

unsubscribe

[Hai Zhu]

[-- Attachment #1: Type: text/plain, Size: 20 bytes --]

unsubscribe


      

[-- Attachment #2: Type: text/html, Size: 136 bytes --]

Unsubscribe

[shreeram]

-- 

-_-
 .

Regards,
R.S.Shree Ram
GDA Technologies Ltd.

unsubscribe

[Kunkel, Ulrich]

[-- Attachment #1: Type: text/plain, Size: 1560 bytes --]

I wish to unsubscribe from this list.

Best Regards,
 

Mit freundlichen Grüßen / Best regards

 

Ulrich Kunkel

Produktlinie Testing Abteilung T-GE

Hottinger Baldwin Messtechnik GmbH
Fax:            +49 6151-803524
E-Mail:         ulrich.kunkel@hbm.com <blocked::mailto:v@hbm.com> 
Internet:      www.hbm.com <blocked::http://www.hbm.com/>  

 

 

Die in dieser E-Mail enthaltene Information ist vertraulich und lediglich für den Empfänger bestimmt. Sollten Sie nicht der eigentliche Empfänger sein, informieren Sie mich bitte kurz und löschen diese E-Mail.

 

Hottinger Baldwin Messtechnik GmbH, Im Tiefen See 45, 64293 Darmstadt, Germany | www.hbm.com 

Registered as GmbH (German limited liability corporation) in the commercial register at the local court of Darmstadt, HRB 1147  
Company domiciled in Darmstadt | CEO: Andreas Huellhorst | Chairman of the board: James Charles Webster

Als Gesellschaft mit beschraenkter Haftung eingetragen im Handelsregister des Amtsgerichts Darmstadt unter HRB 1147 
Sitz der Gesellschaft: Darmstadt | Geschaeftsfuehrung: Andreas Huellhorst | Aufsichtsratsvorsitzender: James Charles Webster

The information in this email is confidential. It is intended solely for the addressee. If you are not the intended recipient, please let me know and delete this email.

Die in dieser E-Mail enthaltene Information ist vertraulich und lediglich für den Empfaenger bestimmt. Sollten Sie nicht der eigentliche Empfaenger sein, informieren Sie mich bitte kurz und loeschen diese E-Mail.


[-- Attachment #2: Type: text/html, Size: 4683 bytes --]

unsubscribe

[zhou.yutao]

[-- Attachment #1: Type: text/plain, Size: 848 bytes --]

深圳中兴力维技术有限公司
地址：深圳市高新区科技南一路W1-A二楼
电话：0755-26525674-8509（办公室）


--------------------------------------------------------
ZTE Information Security Notice: The information contained in this mail is solely property of the sender's organization. This mail communication is confidential. Recipients named above are obligated to maintain secrecy and are not permitted to disclose the contents of this communication to others.
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the originator of the message. Any views expressed in this message are those of the individual sender.
This message has been scanned for viruses and Spam by ZTE Anti-Spam system.

[-- Attachment #2: Type: text/html, Size: 1467 bytes --]

Re: unsubscribe

[Geert Uytterhoeven]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: TEXT/PLAIN; charset=UTF-8, Size: 1448 bytes --]

On Mon, 12 Jan 2009, zhou.yutao@zte.com.cn wrote:
> ÉîÛÚÖÐÐËÁ¦Î¬¼¼ÊõÓÐÏÞ¹«Ë¾
> µØÖ·£ºÉîÛÚÊиßÐÂÇø¿Æ¼¼ÄÏһ·W1-A¶þÂ¥
> µç»°£º0755-26525674-8509£¨°ì¹«ÊÒ£©
> 
> 
> --------------------------------------------------------
> ZTE Information Security Notice: The information contained in this mail is solely property of the sender's organization. This mail communication is confidential. Recipients named above are obligated to maintain secrecy and are not permitted to disclose the contents of this communication to others.
> This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the originator of the message. Any views expressed in this message are those of the individual sender.
> This message has been scanned for viruses and Spam by ZTE Anti-Spam system.

Now I understand why people don't read unsubscription info on mailing list.
They don't read their own signatures ;-)

With kind regards,

Geert Uytterhoeven
Software Architect

Sony Techsoft Centre Europe
The Corporate Village · Da Vincilaan 7-D1 · B-1935 Zaventem · Belgium

Phone:    +32 (0)2 700 8453
Fax:      +32 (0)2 700 8622
E-mail:   Geert.Uytterhoeven@sonycom.com
Internet: http://www.sony-europe.com/

A division of Sony Europe (Belgium) N.V.
VAT BE 0413.825.160 · RPR Brussels
Fortis · BIC GEBABEBB · IBAN BE41293037680010

unsubscribe

[rsterling]

unsubscribe

please

unsubscribe

[sandeep malik]

[-- Attachment #1: Type: text/plain, Size: 265 bytes --]


unsubscribe

please


_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev



      Check out the all-new Messenger 9.0! Go to http://in.messenger.yahoo.com/

[-- Attachment #2: Type: text/html, Size: 901 bytes --]

unsubscribe

[ravi.rao]

[-- Attachment #1: Type: text/plain, Size: 1061 bytes --]

unsubscribe

please
Ravishankar Govindarao
RFL Electronics Inc.
E-mail : Ravi.Rao@rflelect.com
Voice: 973.334.3100 Ext. 233
Fax: 973.334.3863
 
CONFIDENTIALITY NOTE
This e-mail, including any attachments, may contain confidential and/or 
legally privileged information.  The Information is intended only for the 
use of the individual or entity named on this e-mail .  If you are not the 
intended recipient, you are hereby notified that any disclosure, copying, 
distribution, or the taking of any action in reliance on the contents of 
this transmitted Information is strictly prohibited.  Further, if you are 
not the intended recipient, please notify us by return e-mail and delete 
the Information promptly.
 
 
 



rsterling@ssl.berkeley.edu 
Sent by: linuxppc-dev-bounces+ravi.rao=rflelect.com@ozlabs.org
01/11/2009 02:25 PM

To
Linuxppc-dev@ozlabs.org
cc

Subject
unsubscribe






unsubscribe

please


_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev


[-- Attachment #2: Type: text/html, Size: 2544 bytes --]

RE: unsubscribe

[Rajasekaran Kaliyaperumal, Chennai]

[-- Attachment #1: Type: text/plain, Size: 2652 bytes --]


 

unsubscribe

please 

________________________________

From: linuxppc-dev-bounces+rajasekaran.k=hcl.in@ozlabs.org
[mailto:linuxppc-dev-bounces+rajasekaran.k=hcl.in@ozlabs.org] On Behalf
Of ravi.rao@rflelect.com
Sent: Monday, January 12, 2009 6:26 PM
To: rsterling@ssl.berkeley.edu
Cc: Linuxppc-dev@ozlabs.org;
linuxppc-dev-bounces+ravi.rao=rflelect.com@ozlabs.org
Subject: unsubscribe

 


unsubscribe

please
Ravishankar Govindarao
RFL Electronics Inc.
E-mail : Ravi.Rao@rflelect.com <mailto:Ravi.Rao@rflelect.com>  
Voice: 973.334.3100 Ext. 233
Fax: 973.334.3863 

  


CONFIDENTIALITY NOTE


This e-mail, including any attachments, may contain confidential and/or
legally privileged information.  The Information is intended only for
the use of the individual or entity named on this e-mail .  If you are
not the intended recipient, you are hereby notified that any disclosure,
copying, distribution, or the taking of any action in reliance on the
contents of this transmitted Information is strictly prohibited.
Further, if you are not the intended recipient, please notify us by
return e-mail and delete the Information promptly. 

  

  

  



rsterling@ssl.berkeley.edu 
Sent by: linuxppc-dev-bounces+ravi.rao=rflelect.com@ozlabs.org 

01/11/2009 02:25 PM 

To

Linuxppc-dev@ozlabs.org 

cc

 

Subject

unsubscribe

 

 

 




unsubscribe

please


_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
<https://ozlabs.org/mailman/listinfo/linuxppc-dev> 



DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in 
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of 
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have
received this email in error please delete it and notify the sender immediately. Before opening any mail and 
attachments please check them for viruses and defect.

-----------------------------------------------------------------------------------------------------------------------

[-- Attachment #2: Type: text/html, Size: 11493 bytes --]

Unsubscribe

[Nadav Sharabi]

[-- Attachment #1: Type: text/plain, Size: 72 bytes --]

Hi,

I wish to unsubscribe from this list.

Best Regards,
Nadav Sharabi

[-- Attachment #2: Type: text/html, Size: 112 bytes --]

Re: Unsubscribe

[Wei Jack]

[-- Attachment #1: Type: text/plain, Size: 53 bytes --]

I wish to unsubscribe from this list.

Best Regards,

[-- Attachment #2: Type: text/html, Size: 67 bytes --]

unsubscribe

[Ignacio Vara]

[-- Attachment #1: Type: text/plain, Size: 13 bytes --]

unsubscribe


[-- Attachment #2: Type: text/html, Size: 1552 bytes --]

unsubscribe

[List]

[-- Attachment #1: Type: text/plain, Size: 15 bytes --]

unsubscribe 

 

[-- Attachment #2: Type: text/html, Size: 1958 bytes --]

unsubscribe

[Yedu Jathavedan]

unsubscribe

unsubscribe

[rsterling]

unsubscribe

---------------------------------------
Rick Sterling
Space Sciences Laboratory
University of California, Berkeley
510.642.6149
rsterling@ssl.berkeley.edu
---------------------------------------

unsubscribe

[Wei Jack]

[-- Attachment #1: Type: text/plain, Size: 159 bytes --]

unsubscribe
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

[-- Attachment #2: Type: text/html, Size: 341 bytes --]

unsubscribe

[neeraj garg]

[-- Attachment #1: Type: text/plain, Size: 12 bytes --]

unsubscribe

[-- Attachment #2: Type: text/html, Size: 12 bytes --]

mpc5200 ATA DMA

[Peter Czanik]

Hello,

I did a few tests this morning with the new DMA code on the EFIKA and
got the following results:

- libata.force=udma2

SCSI subsystem
initialized                                                                         

ata: MPC52xx IDE/ATA libata
driver                                                                 
scsi0 :
mpc52xx_ata                                                                                

ata1: PATA max PIO4 ata_regs 0xf0003a00 irq
135                                                    
ata1.00: ATA-6: ST980815A, 3.ALD, max
UDMA/100                                                     
ata1.00: 156301488 sectors, multi 0:
LBA48                                                         
ata1.00: FORCE: xfer_mask set to
udma2                                                             
ata1.00: configured for
UDMA/33                                                                    
scsi 0:0:0:0: Direct-Access     ATA      ST980815A        3.AL PQ: 0
ANSI: 5                       
Creating device nodes with
udev                                                                    
udevd version 128
started                                                                          

ppc-of-ohci f0001000.usb: OF
OHCI                                                                  
ppc-of-ohci f0001000.usb: new USB bus registered, assigned bus number
1                            
ppc-of-ohci f0001000.usb: irq 134, io mem
0xf0001000                                               
usb usb1: configuration #1 chosen from 1
choice                                                    
hub 1-0:1.0: USB hub
found                                                                         

hub 1-0:1.0: 2 ports
detected                                                                      

usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001                                      
usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1                                 
usb usb1: Product: OF
OHCI                                                                         

usb usb1: Manufacturer: Linux 2.6.27.7-99.1-genesi
ohci_hcd                                        
usb usb1: SerialNumber: PPC-OF
USB                                                                 
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors:
(80.0GB/74.5GiB)                            
sd 0:0:0:0: [sda] Write Protect is
off                                                             
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA            
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors:
(80.0GB/74.5GiB)                            
sd 0:0:0:0: [sda] Write Protect is
off                                                             
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA            
 sda:                                                                                              

                                                                                                   

After the udevadm settle timeout, the events queue
contains:                                       
                                                                                                   

304:
/devices/f0000000.builtin/f0003a00.ata/host0/target0:0:0/0:0:0:0                              

305:
/devices/f0000000.builtin/f0003a00.ata/host0/target0:0:0/0:0:0:0/bsg/0:0:0:0                  

306:
/devices/f0000000.builtin/f0003a00.ata/host0/target0:0:0/0:0:0:0/scsi_device/0:0:0:0          

427:
/devices/f0000000.builtin/f0003a00.ata/host0/target0:0:0/0:0:0:0/scsi_disk/0:0:0:0            

                                                                                                   

                                                                                                   

Boot logging started on /dev/ttyPSC0(/dev/console) at Wed Jan  7
06:58:13 2009                     
<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen                                
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096
in                                 
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)                               
ata1.00: status: { DRDY
}                                                                          
ata1: soft resetting
link                                                                          

ata1.00: revalidation failed
(errno=-2)                                                            
ata1: soft resetting
link                                                                          

ata1.00: revalidation failed
(errno=-2)                                                            
ata1: soft resetting
link                                                                          

ata1.00: revalidation failed
(errno=-2)                                                            
ata1.00:
disabled                                                                                  

ata1: soft resetting
link                                                                          

ata1: EH
complete                                                                                  

sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
ldm_validate_partition_table(): Disk read
failed.                                                  
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
Dev sda: unable to read RDB block
0                                                                
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 24
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 24
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
 unable to read partition table
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
Waiting for device /dev/sda11 to appear:
..............................Could not find /dev/sda11.
Want me to fall back to /dev/sda11? (Y/n)

- libata.force=mwdma2 is just about the same:

scsi0 :
mpc52xx_ata                                                                                

ata1: PATA max PIO4 ata_regs 0xf0003a00 irq
135                                                    
ata1.00: ATA-6: ST980815A, 3.ALD, max
UDMA/100                                                     
ata1.00: 156301488 sectors, multi 0:
LBA48                                                         
ata1.00: FORCE: xfer_mask set to
mwdma2                                                            
ata1.00: configured for
MWDMA2                                                                     
scsi 0:0:0:0: Direct-Access     ATA      ST980815A        3.AL PQ: 0
ANSI: 5                       
Creating device nodes with
udev                                                                    
udevd version 128
started                                                                          

ppc-of-ohci f0001000.usb: OF
OHCI                                                                  
ppc-of-ohci f0001000.usb: new USB bus registered, assigned bus number
1                            
ppc-of-ohci f0001000.usb: irq 134, io mem
0xf0001000                                               
usb usb1: configuration #1 chosen from 1
choice                                                    
hub 1-0:1.0: USB hub
found                                                                         

hub 1-0:1.0: 2 ports
detected                                                                      

usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001                                      
usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1                                 
usb usb1: Product: OF
OHCI                                                                         

usb usb1: Manufacturer: Linux 2.6.27.7-99.1-genesi
ohci_hcd                                        
usb usb1: SerialNumber: PPC-OF
USB                                                                 
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors:
(80.0GB/74.5GiB)                            
sd 0:0:0:0: [sda] Write Protect is
off                                                             
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA            
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors:
(80.0GB/74.5GiB)                            
sd 0:0:0:0: [sda] Write Protect is
off                                                             
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA            
 sda:                                                                                              

                                                                                                   

After the udevadm settle timeout, the events queue
contains:                                       
                                                                                                   

304:
/devices/f0000000.builtin/f0003a00.ata/host0/target0:0:0/0:0:0:0                              

305:
/devices/f0000000.builtin/f0003a00.ata/host0/target0:0:0/0:0:0:0/bsg/0:0:0:0                  

306:
/devices/f0000000.builtin/f0003a00.ata/host0/target0:0:0/0:0:0:0/scsi_device/0:0:0:0          

427:
/devices/f0000000.builtin/f0003a00.ata/host0/target0:0:0/0:0:0:0/scsi_disk/0:0:0:0            

                                                                                                   

                                                                                                   

Boot logging started on /dev/ttyPSC0(/dev/console) at Wed Jan  7
07:05:50 2009                     
<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen                                
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096
in                                 
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)                               
ata1.00: status: { DRDY
}                                                                          
ata1: soft resetting
link                                                                          

ata1.00: revalidation failed
(errno=-2)                                                            
ata1: soft resetting
link                                                                          

ata1.00: revalidation failed
(errno=-2)                                                            
ata1: soft resetting
link                                                                          

ata1.00: revalidation failed
(errno=-2)                                                            
ata1.00:
disabled                                                                                  

ata1: soft resetting
link                                                                          

ata1: EH
complete                                                                                  

sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
ldm_validate_partition_table(): Disk read
failed.                                                  
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
Dev sda: unable to read RDB block
0                                                                
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 24
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 24
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
 unable to read partition table
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
Waiting for device /dev/sda11 to appear:
..............................Could not find /dev/sda11.
Want me to fall back to /dev/sda11? (Y/n)

- just as libata.force=mwdma1

SCSI subsystem
initialized                                                                         

ata: MPC52xx IDE/ATA libata
driver                                                                 
scsi0 :
mpc52xx_ata                                                                                

ata1: PATA max PIO4 ata_regs 0xf0003a00 irq
135                                                    
ata1.00: ATA-6: ST980815A, 3.ALD, max
UDMA/100                                                     
ata1.00: 156301488 sectors, multi 0:
LBA48                                                         
ata1.00: FORCE: xfer_mask set to
mwdma1                                                            
ata1.00: configured for
MWDMA1                                                                     
scsi 0:0:0:0: Direct-Access     ATA      ST980815A        3.AL PQ: 0
ANSI: 5                       
Creating device nodes with
udev                                                                    
udevd version 128
started                                                                          

ppc-of-ohci f0001000.usb: OF
OHCI                                                                  
ppc-of-ohci f0001000.usb: new USB bus registered, assigned bus number
1                            
ppc-of-ohci f0001000.usb: irq 134, io mem
0xf0001000                                               
usb usb1: configuration #1 chosen from 1
choice                                                    
hub 1-0:1.0: USB hub
found                                                                         

hub 1-0:1.0: 2 ports
detected                                                                      

usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001                                      
usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1                                 
usb usb1: Product: OF
OHCI                                                                         

usb usb1: Manufacturer: Linux 2.6.27.7-99.1-genesi
ohci_hcd                                        
usb usb1: SerialNumber: PPC-OF
USB                                                                 
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors:
(80.0GB/74.5GiB)                            
sd 0:0:0:0: [sda] Write Protect is
off                                                             
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA            
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors:
(80.0GB/74.5GiB)                            
sd 0:0:0:0: [sda] Write Protect is
off                                                             
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA            
 sda:                                                                                              

                                                                                                   

After the udevadm settle timeout, the events queue
contains:                                       
                                                                                                   

304:
/devices/f0000000.builtin/f0003a00.ata/host0/target0:0:0/0:0:0:0                              

305:
/devices/f0000000.builtin/f0003a00.ata/host0/target0:0:0/0:0:0:0/bsg/0:0:0:0                  

306:
/devices/f0000000.builtin/f0003a00.ata/host0/target0:0:0/0:0:0:0/scsi_device/0:0:0:0          

427:
/devices/f0000000.builtin/f0003a00.ata/host0/target0:0:0/0:0:0:0/scsi_disk/0:0:0:0            

                                                                                                   

                                                                                                   

Boot logging started on /dev/ttyPSC0(/dev/console) at Wed Jan  7
07:09:38 2009                     
<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen                                
ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096
in                                 
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4
(timeout)                               
ata1.00: status: { DRDY
}                                                                          
ata1: soft resetting
link                                                                          

ata1.00: revalidation failed
(errno=-2)                                                            
ata1: soft resetting
link                                                                          

ata1.00: revalidation failed
(errno=-2)                                                            
ata1: soft resetting
link                                                                          

ata1.00: revalidation failed
(errno=-2)                                                            
ata1.00:
disabled                                                                                  

ata1: soft resetting
link                                                                          

ata1: EH
complete                                                                                  

sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
ldm_validate_partition_table(): Disk read
failed.                                                  
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block
0                                                    
Dev sda: unable to read RDB block
0                                                                
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK                  
end_request: I/O error, dev sda, sector
0                                                          
Buffer I/O error on device sda, logical block 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
Buffer I/O error on device sda, logical block 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 24
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 24
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
 unable to read partition table
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET
driverbyte=DRIVER_OK,SUGGEST_OK
end_request: I/O error, dev sda, sector 0
Waiting for device /dev/sda11 to appear:
..............................Could not find /dev/sda11.
Want me to fall back to /dev/sda11? (Y/n)

- no kernel parameters: no trouble at all

SCSI subsystem
initialized                                                                         

ata: MPC52xx IDE/ATA libata
driver                                                                 
scsi0 :
mpc52xx_ata                                                                                

ata1: PATA max PIO4 ata_regs 0xf0003a00 irq
135                                                    
ata1.00: ATA-6: ST980815A, 3.ALD, max
UDMA/100                                                     
ata1.00: 156301488 sectors, multi 0:
LBA48                                                         
ata1.00: configured for
PIO4                                                                       
scsi 0:0:0:0: Direct-Access     ATA      ST980815A        3.AL PQ: 0
ANSI: 5                       
Creating device nodes with
udev                                                                    
udevd version 128
started                                                                          

ppc-of-ohci f0001000.usb: OF
OHCI                                                                  
ppc-of-ohci f0001000.usb: new USB bus registered, assigned bus number
1                            
ppc-of-ohci f0001000.usb: irq 134, io mem
0xf0001000                                               
usb usb1: configuration #1 chosen from 1
choice                                                    
hub 1-0:1.0: USB hub
found                                                                         

hub 1-0:1.0: 2 ports
detected                                                                      

usb usb1: New USB device found, idVendor=1d6b,
idProduct=0001                                      
usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1                                 
usb usb1: Product: OF
OHCI                                                                         

usb usb1: Manufacturer: Linux 2.6.27.7-99.1-genesi
ohci_hcd                                        
usb usb1: SerialNumber: PPC-OF
USB                                                                 
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors:
(80.0GB/74.5GiB)                            
sd 0:0:0:0: [sda] Write Protect is
off                                                             
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA            
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors:
(80.0GB/74.5GiB)                            
sd 0:0:0:0: [sda] Write Protect is
off                                                             
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA            
 sda: RDSK (512) sda1 (LNX^@)(res 2 spb 1) sda2 (SWP^@)(res 2 spb 1)
sda3 (EXT^C)(res 2 spb 1) sda4)
sd 0:0:0:0: [sda] Attached SCSI
disk                                                               
Boot logging started on /dev/ttyPSC0(/dev/console) at Wed Jan  7
07:19:21 2009                     
Waiting for device /dev/sda11 to appear: 
ok                                                       
fsck 1.41.1
(01-Sep-2008)                                                                          

[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a
/dev/sda11                                                 
/dev/sda11: clean, 100696/429088 files, 569041/1714938
blocks                                      
fsck succeeded. Mounting root device
read-write.                                                   
Mounting root
/dev/sda11                                                                           


Bye,
CzP

Unsubscribe

[Landau, Bracha]

This e-mail is confidential, the property of NDS Ltd and intended for the a=
ddressee only. Any dissemination, copying or distribution of this message o=
r any attachments by anyone other than the intended recipient is strictly p=
rohibited. If you have received this message in error, please immediately n=
otify the postmaster@nds.com and destroy the original message. Messages sen=
t to and from NDS may be monitored. NDS cannot guarantee any message delive=
ry method is secure or error-free. Information could be intercepted, corrup=
ted, lost, destroyed, arrive late or incomplete, or contain viruses. We do =
not accept responsibility for any errors or omissions in this message and/o=
r attachment that arise as a result of transmission. You should carry out y=
our own virus checks before opening any attachment. Any views or opinions p=
resented are solely those of the author and do not necessarily represent th=
ose of NDS.

To protect the environment please do not print this e-mail unless necessary=
.

NDS Limited Registered office: One Heathrow Boulevard, 286 Bath Road, West =
Drayton, Middlesex, UB7 0DQ, United Kingdom. A company registered in Englan=
d and Wales Registered no. 3080780 VAT no. GB 603 8808 40-00

unsubscribe

[santhoshunnikrishnan]

[-- Attachment #1.1: Type: text/plain, Size: 460 bytes --]

 
Please unsubscribe me, thanks!


The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain proprietary, confidential or privileged information. If you are not the intended recipient, you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately and destroy all copies of this message and any attachments contained in it.

[-- Attachment #1.2: Type: text/html, Size: 808 bytes --]

[-- Attachment #2: ATT00043.txt --]
[-- Type: text/plain, Size: 146 bytes --]

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

RE: unsubscribe

[Rustagi, Vikas]

[-- Attachment #1: Type: text/plain, Size: 801 bytes --]

Please unsubscribe me...thanks

 



DISCLAIMER:
Unless indicated otherwise, the information contained in this message is privileged and confidential, and is intended only for the use of the addressee(s) named above and others who have been specifically authorized to receive it. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message and/or attachments is strictly prohibited. The company accepts no liability for any damage caused by any virus transmitted by this email. Furthermore, the company does not warrant a proper and complete transmission of this information, nor does it accept liability for any delays. If you have received this message in error, please contact the sender and delete the message. Thank you.

[-- Attachment #2: Type: text/html, Size: 1117 bytes --]

Re: unsubscribe

[Sungjoo Kim]

[-- Attachment #1: Type: text/plain, Size: 802 bytes --]

Please unsubscribe me too, thanks!!



santhoshunnikrishnan@tataelxsi.co.in wrote:
>  
> Please unsubscribe me, thanks!
>
> The information contained in this electronic message and any 
> attachments to this message are intended for the exclusive use of the 
> addressee(s) and may contain proprietary, confidential or privileged 
> information. If you are not the intended recipient, you should not 
> disseminate, distribute or copy this e-mail. Please notify the sender 
> immediately and destroy all copies of this message and any attachments 
> contained in it.
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev


[-- Attachment #2: Type: text/html, Size: 1568 bytes --]

unsubscribe

[pravin]

[-- Attachment #1: Type: text/plain, Size: 0 bytes --]



[-- Attachment #2: Type: text/html, Size: 113 bytes --]

unsubscribe

[hb fei]

[-- Attachment #1: Type: text/plain, Size: 1 bytes --]



[-- Attachment #2: Type: text/html, Size: 5 bytes --]

unsubscribe

[Tao Xue]

Please unsubscribe me,

thanks

unsubscribe

[AKS]

[-- Attachment #1: Type: text/plain, Size: 31 bytes --]

Please unsubscribe me, thanks!

[-- Attachment #2: Type: text/html, Size: 66 bytes --]

unsubscribe

[zhou.yutao]

[-- Attachment #1: Type: text/plain, Size: 1371 bytes --]

Please unsubscribe me, thanks!
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org




深圳中兴力维技术有限公司
地址：深圳市高新区科技南一路W1-A二楼
电话：0755-26525674-8509（办公室）



AKS <aung.aungkyawsoe@gmail.com> 
发件人:  linuxppc-dev-bounces+zhou.yutao=zte.com.cn@ozlabs.org
2009-01-07 14:32

收件人
Linuxppc-dev@ozlabs.org
抄送

主题
unsubscribe






Please unsubscribe me, thanks!
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev



--------------------------------------------------------
ZTE Information Security Notice: The information contained in this mail is solely property of the sender's organization. This mail communication is confidential. Recipients named above are obligated to maintain secrecy and are not permitted to disclose the contents of this communication to others.
This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the originator of the message. Any views expressed in this message are those of the individual sender.
This message has been scanned for viruses and Spam by ZTE Anti-Spam system.

[-- Attachment #2: Type: text/html, Size: 2795 bytes --]

RE: unsubscribe

[Decherf, Patrick]

[-- Attachment #1: Type: text/plain, Size: 796 bytes --]

Please unsubscribe me, thanks!



DISCLAIMER:
Unless indicated otherwise, the information contained in this message is privileged and confidential, and is intended only for the use of the addressee(s) named above and others who have been specifically authorized to receive it. If you are not the intended recipient, you are hereby notified that any dissemination, distribution or copying of this message and/or attachments is strictly prohibited. The company accepts no liability for any damage caused by any virus transmitted by this email. Furthermore, the company does not warrant a proper and complete transmission of this information, nor does it accept liability for any delays. If you have received this message in error, please contact the sender and delete the message. Thank you.

[-- Attachment #2: Type: text/html, Size: 1066 bytes --]

RE: unsubscribe

[Liu Dave]

They seem like worm virus. or
The linuxppc-dev really doesn't have love?

Unsubscribe

[JeongIn Choi]

[-- Attachment #1: Type: text/html, Size: 2493 bytes --]

Re: unsubscribe

[Ian Juang]

Please unsubscribe me from this list.


>
> -------- Original Message --------
> Subject: unsubscribe
> From: Leonid <Leonid@a-k-a.net>
> To: Linuxppc-dev@ozlabs.org
> Date: 2009年1月6日 上午 02:03:55
>
>
>
> Please unsubscribe me from this list.
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
>   

unsubscribe

[Iain Shewring]

unsubscribe

[Jim Rose]

[-- Attachment #1: Type: text/plain, Size: 2 bytes --]



[-- Attachment #2: Type: text/html, Size: 1096 bytes --]

unsubscribe

[Nate Jozwiak]

[-- Attachment #1: Type: text/plain, Size: 19 bytes --]

unsubscribe

 

 


[-- Attachment #2: Type: text/html, Size: 1481 bytes --]

Re: unsubscribe

[vikas.soni]

unsubscibe me ......

thanks

> unsubscribe
>
>
>
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev

RE: unsubscribe

[Paul Eaton]

Unsubscribe me please

-----Original Message-----
From: linuxppc-dev-bounces+pauleaton=earthlink.net@ozlabs.org
[mailto:linuxppc-dev-bounces+pauleaton=earthlink.net@ozlabs.org] On Behalf
Of vikas.soni@gdatech.co.in
Sent: Tuesday, January 06, 2009 12:04 AM
To: Nate Jozwiak
Cc: linuxppc-dev@ozlabs.org
Subject: Re: unsubscribe

unsubscibe me ......

thanks

> unsubscribe
>
>
>
>
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

unsubscribe

[Leonid]

Please unsubscribe me from this list.

unsubscribe

[Nitesh Guinde]

[-- Attachment #1: Type: text/plain, Size: 1 bytes --]



[-- Attachment #2: Type: text/html, Size: 5 bytes --]

unsubscribe

[P Jagadeesh Maiya]

[-- Attachment #1: Type: text/plain, Size: 0 bytes --]



[-- Attachment #2: Type: text/html, Size: 289 bytes --]

Unsubscribe

[Narendra KA]

[-- Attachment #1: Type: text/plain, Size: 95 bytes --]

 Hi,

can you please unsubscribe me from this mailing list?
 
Thanks and Regards,
Narendra K.A

[-- Attachment #2: Type: text/html, Size: 448 bytes --]

Re: Unsubscribe

[Steve Iribarne (GMail)]

HOLLY CRAP everyone.. please read at the bottom of these emails to
figure out how to unsubscribe.  This is ridiculous!

Towards the bottom of the
"https://ozlabs.org/mailman/listinfo/linuxppc-dev" page there is
simple place you put your f'ing email address and hit "Unsubscribe or
edit options".

That's why we put it there... so you could do it and we wouldn't have
to do any of it.

Please quit sending emails asking someone to do something for you.

Sorry for the spam, but I'm hung over from new years and in a bad mood
and this was the email that sent me over the top.  No ill will towards
you Narendra.

-stv

On Sun, Jan 4, 2009 at 8:32 PM, Narendra KA <Narendra.KA@lntemsys.com> wrote:
>
>
> Hi,
>
> can you please unsubscribe me from this mailing list?
>
> Thanks and Regards,
> Narendra K.A
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>



-- 
/*
 * Steve Iribarne
 * Software Engineer
 * (aka Grunt)
 */

Re: Unsubscribe

[Tore Martin Hagen]

[-- Attachment #1: Type: text/plain, Size: 1683 bytes --]

There are two problems here.

The first is that a lot of people has unsubscribed to this list a long 
time ago, and then when it changed name we where suddenly subscribed for 
again.

The second is that the site 
https://ozlabs.org/mailman/listinfo/linuxppc-dev has an invalid security 
certificate, so we can not really unsubscribe that way.

I suggest that the certificate is updated.

/Tore

Steve Iribarne (GMail) wrote:
> HOLLY CRAP everyone.. please read at the bottom of these emails to
> figure out how to unsubscribe.  This is ridiculous!
>
> Towards the bottom of the
> "https://ozlabs.org/mailman/listinfo/linuxppc-dev" page there is
> simple place you put your f'ing email address and hit "Unsubscribe or
> edit options".
>
> That's why we put it there... so you could do it and we wouldn't have
> to do any of it.
>
> Please quit sending emails asking someone to do something for you.
>
> Sorry for the spam, but I'm hung over from new years and in a bad mood
> and this was the email that sent me over the top.  No ill will towards
> you Narendra.
>
> -stv
>
> On Sun, Jan 4, 2009 at 8:32 PM, Narendra KA <Narendra.KA@lntemsys.com> wrote:
>   
>> Hi,
>>
>> can you please unsubscribe me from this mailing list?
>>
>> Thanks and Regards,
>> Narendra K.A
>>
>> _______________________________________________
>> Linuxppc-dev mailing list
>> Linuxppc-dev@ozlabs.org
>> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>>
>>     
>
>
>
> --
> /*
>  * Steve Iribarne
>  * Software Engineer
>  * (aka Grunt)
>  */
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>   


[-- Attachment #2: Type: text/html, Size: 2680 bytes --]

Re: Unsubscribe

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 987 bytes --]

Hi Tore,

On Tue, 06 Jan 2009 08:39:31 +0100 Tore Martin Hagen <thagen@slb.com> wrote:
>
> The first is that a lot of people has unsubscribed to this list a long 
> time ago, and then when it changed name we where suddenly subscribed for 
> again.

I only transferred over people who were currently subscribed to the
linuxppc-embedded list - some of these may have had their mail delivery
from the list *disabled*, but there was no easy way to check that, sorry.

> The second is that the site 
> https://ozlabs.org/mailman/listinfo/linuxppc-dev has an invalid security 
> certificate, so we can not really unsubscribe that way.
> 
> I suggest that the certificate is updated.

We use a certificate issued by cacert.org.  Unfortunately, a lot of
browsers do not recognise them as a CA.

You can use http://ozlabs.org/mailman/listinfo/linuxppc-dev instead.

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au
http://www.canb.auug.org.au/~sfr/

[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]

Unsubscribe

[Frank Lautenbach]

Hi,

can you please unsubscribe me from this mailing list?

Thanks!


Greetings,

Frank

Re: Unsubscribe

[Leon Woestenberg]

Hello Frank,

On Sun, Jan 4, 2009 at 1:22 PM, Frank Lautenbach
<frank.lautenbach@gmx.de> wrote:
> can you please unsubscribe me from this mailing list?
> Frank

Every email from the list comes with this footer:

> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
Visit that URL and use the unsubscribe feature.

Regards,
-- 
Leon

unsubscribe

[Ed Henderson]

[-- Attachment #1: Type: text/plain, Size: 3 bytes --]

 


[-- Attachment #2: Type: text/html, Size: 1619 bytes --]

unsubscribe

[Alexander Baldeck]

unsubscribe

[mike]

Michael J. Kelly
VP Engineering
Cogent Computer Systems, Inc.
17 Industrial Dr.
Smithfield, RI 02917
tel:401-223-3441 fax:401-223-3442
www.cogcomp.com
alternate email: mkelly6505@hotmail.com

Re: Is get_property() correct?

[Michael Ellerman]

[-- Attachment #1: Type: text/plain, Size: 875 bytes --]

On Sat, 2006-10-28 at 01:38 -0600, Grant Likely wrote:
> On 10/28/06, Benjamin Herrenschmidt <benh@kernel.crashing.org> wrote:
> > On Sat, 2006-10-28 at 00:41 -0600, Grant Likely wrote:
> >
> > Well considering that we don't know the type of the property value, the
> > best we can do is return a pointer to it ...
> >
> > The comment might want an update, though it never stroke me as confusing
> > but heh :)
> 
> No, it's not confusing.  Both the comment and the code are correct.  I
> just forgot how to read code.  :(

But at least now we're all _sure_ they're correct, some good still
done :)

cheers

-- 
Michael Ellerman
OzLabs, IBM Australia Development Lab

wwweb: http://michael.ellerman.id.au
phone: +61 2 6212 1183 (tie line 70 21183)

We do not inherit the earth from our ancestors,
we borrow it from our children. - S.M.A.R.T Person

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 191 bytes --]

unsubscribe

[Usha Rani Konudula]

unsubscribe

unsubscribe

[Usha Rani Konudula]

unsubscribe

unsubscribe

[umesh k]

[-- Attachment #1: Type: text/plain, Size: 105 bytes --]

  
 				
---------------------------------
 Find out what India is talking about on Yahoo! Answers India.

[-- Attachment #2: Type: text/html, Size: 190 bytes --]

unsubscribe

[rohitash panda]

[-- Attachment #1: Type: text/plain, Size: 137 bytes --]

  


Ability is what you are capable of doing. 

Motivation determines what you do. 

Attitude determines how well you do it. 

[-- Attachment #2: Type: text/html, Size: 537 bytes --]

unsubscribe

[shrisha.prasad]

[-- Attachment #1: Type: text/plain, Size: 0 bytes --]



[-- Attachment #2: Type: text/html, Size: 0 bytes --]

unsubscribe

[Moloko Vellocet]

[-- Attachment #1: Type: text/plain, Size: 13 bytes --]

unsubscribe

[-- Attachment #2: Type: text/html, Size: 13 bytes --]

unsubscribe

[Geert Janssens]