Re: [PATCH v3 0/6] mm: Further memory block device cleanups

[David Hildenbrand <david@redhat.com>]

On 21.06.19 17:15, Qian Cai wrote:
> On Thu, 2019-06-20 at 20:31 +0200, David Hildenbrand wrote:
>> @Andrew: Only patch 1, 4 and 6 changed compared to v1.
>>
>> Some further cleanups around memory block devices. Especially, clean up
>> and simplify walk_memory_range(). Including some other minor cleanups.
>>
>> Compiled + tested on x86 with DIMMs under QEMU. Compile-tested on ppc64.
>>
>> v2 -> v3:
>> - "mm/memory_hotplug: Rename walk_memory_range() and pass start+size .."
>> -- Avoid warning on ppc.
>> - "drivers/base/memory.c: Get rid of find_memory_block_hinted()"
>> -- Fixup a comment regarding hinted devices.
>>
>> v1 -> v2:
>> - "mm: Section numbers use the type "unsigned long""
>> -- "unsigned long i" -> "unsigned long nr", in one case -> "int i"
>> - "drivers/base/memory.c: Get rid of find_memory_block_hinted("
>> -- Fix compilation error
>> -- Get rid of the "hint" parameter completely
>>
>> David Hildenbrand (6):
>>   mm: Section numbers use the type "unsigned long"
>>   drivers/base/memory: Use "unsigned long" for block ids
>>   mm: Make register_mem_sect_under_node() static
>>   mm/memory_hotplug: Rename walk_memory_range() and pass start+size
>>     instead of pfns
>>   mm/memory_hotplug: Move and simplify walk_memory_blocks()
>>   drivers/base/memory.c: Get rid of find_memory_block_hinted()
>>
>>  arch/powerpc/platforms/powernv/memtrace.c |  23 ++---
>>  drivers/acpi/acpi_memhotplug.c            |  19 +---
>>  drivers/base/memory.c                     | 120 +++++++++++++---------
>>  drivers/base/node.c                       |   8 +-
>>  include/linux/memory.h                    |   5 +-
>>  include/linux/memory_hotplug.h            |   2 -
>>  include/linux/mmzone.h                    |   4 +-
>>  include/linux/node.h                      |   7 --
>>  mm/memory_hotplug.c                       |  57 +---------
>>  mm/sparse.c                               |  12 +--
>>  10 files changed, 106 insertions(+), 151 deletions(-)
>>
> 
> This series causes a few machines are unable to boot triggering endless soft
> lockups. Reverted those commits fixed the issue.
> 
> 97f4217d1da0 Revert "mm/memory_hotplug: rename walk_memory_range() and pass
> start+size instead of pfns"
> c608eebf33c6 Revert "mm-memory_hotplug-rename-walk_memory_range-and-pass-
> startsize-instead-of-pfns-fix"
> 34b5e4ab7558 Revert "mm/memory_hotplug: move and simplify walk_memory_blocks()"
> 59a9f3eec5d1 Revert "drivers/base/memory.c: Get rid of
> find_memory_block_hinted()"
> 5cfcd52288b6 Revert "drivers-base-memoryc-get-rid-of-find_memory_block_hinted-
> v3"
> 
> [    4.582081][    T1] ACPI FADT declares the system doesn't support PCIe ASPM,
> so disable it
> [    4.590405][    T1] ACPI: bus type PCI registered
> [    4.592908][    T1] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
> 0x80000000-0x8fffffff] (base 0x80000000)
> [    4.601860][    T1] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in
> E820
> [    4.601860][    T1] PCI: Using configuration type 1 for base access
> [   28.661336][   C16] watchdog: BUG: soft lockup - CPU#16 stuck for 22s!
> [swapper/0:1]
> [   28.671351][   C16] Modules linked in:
> [   28.671354][   C16] CPU: 16 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc5-
> next-20190621+ #1
> [   28.681366][   C16] Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385
> Gen10, BIOS A40 03/09/2018
> [   28.691334][   C16] RIP: 0010:_raw_spin_unlock_irqrestore+0x2f/0x40
> [   28.701334][   C16] Code: 55 48 89 e5 41 54 49 89 f4 be 01 00 00 00 53 48 8b
> 55 08 48 89 fb 48 8d 7f 18 e8 4c 89 7d ff 48 89 df e8 94 f9 7d ff 41 54 9d <65>
> ff 0d c2 44 8d 48 5b 41 5c 5d c3 0f 1f 44 00 00 0f 1f 44 00 00
> [   28.711354][   C16] RSP: 0018:ffff888205b27bf8 EFLAGS: 00000246 ORIG_RAX:
> ffffffffffffff13
> [   28.721372][   C16] RAX: 0000000000000000 RBX: ffff8882053d6138 RCX:
> ffffffffb6f2a3b8
> [   28.731371][   C16] RDX: 1ffff11040a7ac27 RSI: dffffc0000000000 RDI:
> ffff8882053d6138
> [   28.741371][   C16] RBP: ffff888205b27c08 R08: ffffed1040a7ac28 R09:
> ffffed1040a7ac27
> [   28.751334][   C16] R10: ffffed1040a7ac27 R11: ffff8882053d613b R12:
> 0000000000000246
> [   28.751370][   C16] R13: ffff888205b27c98 R14: ffff8884504d0a20 R15:
> 0000000000000000
> [   28.761368][   C16] FS:  0000000000000000(0000) GS:ffff888454500000(0000)
> knlGS:0000000000000000
> [   28.771373][   C16] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [   28.781334][   C16] CR2: 0000000000000000 CR3: 00000007c9012000 CR4:
> 00000000001406a0
> [   28.791333][   C16] Call Trace:
> [   28.791374][   C16]  klist_next+0xd8/0x1c0
> [   28.791374][   C16]  subsys_find_device_by_id+0x13b/0x1f0
> [   28.801334][   C16]  ? bus_find_device_by_name+0x20/0x20
> [   28.801370][   C16]  ? kobject_put+0x23/0x250
> [   28.811333][   C16]  walk_memory_blocks+0x6c/0xb8
> [   28.811353][   C16]  ? write_policy_show+0x40/0x40
> [   28.821334][   C16]  link_mem_sections+0x7e/0xa0
> [   28.821369][   C16]  ? unregister_memory_block_under_nodes+0x210/0x210
> [   28.831353][   C16]  ? __register_one_node+0x3bd/0x600
> [   28.831353][   C16]  topology_init+0xbf/0x126
> [   28.841364][   C16]  ? enable_cpu0_hotplug+0x1a/0x1a
> [   28.841368][   C16]  do_one_initcall+0xfe/0x45a
> [   28.851334][   C16]  ? initcall_blacklisted+0x150/0x150
> [   28.851353][   C16]  ? kasan_check_write+0x14/0x20
> [   28.861333][   C16]  ? up_write+0x75/0x140
> [   28.861369][   C16]  kernel_init_freeable+0x619/0x6ac
> [   28.871333][   C16]  ? rest_init+0x188/0x188
> [   28.871353][   C16]  kernel_init+0x11/0x138
> [   28.881363][   C16]  ? rest_init+0x188/0x188
> [   28.881363][   C16]  ret_from_fork+0x22/0x40
> [   56.661336][   C16] watchdog: BUG: soft lockup - CPU#16 stuck for 22s!
> [swapper/0:1]
> [   56.671352][   C16] Modules linked in:
> [   56.671354][   C16] CPU: 16 PID: 1 Comm: swapper/0 Tainted:
> G             L    5.2.0-rc5-next-20190621+ #1
> [   56.681357][   C16] Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385
> Gen10, BIOS A40 03/09/2018
> [   56.691356][   C16] RIP: 0010:subsys_find_device_by_id+0x168/0x1f0
> [   56.701334][   C16] Code: 48 85 c0 74 3e 48 8d 78 58 e8 14 77 ca ff 4d 8b 7e
> 58 4d 85 ff 74 2c 49 8d bf a0 03 00 00 e8 bf 75 ca ff 45 39 a7 a0 03 00 00 <75>
> c9 4c 89 ff e8 0e 89 ff ff 48 85 c0 74 bc 48 89 df e8 21 3b 24
> [   56.721333][   C16] RSP: 0018:ffff888205b27c68 EFLAGS: 00000287 ORIG_RAX:
> ffffffffffffff13
> [   56.721370][   C16] RAX: 0000000000000000 RBX: ffff888205b27c90 RCX:
> ffffffffb74c9dc1
> [   56.731370][   C16] RDX: 0000000000000003 RSI: dffffc0000000000 RDI:
> ffff8888774ec3e0
> [   56.741371][   C16] RBP: ffff888205b27cf8 R08: ffffed1040a7ac28 R09:
> ffffed1040a7ac27
> [   56.751335][   C16] R10: ffffed1040a7ac27 R11: ffff8882053d613b R12:
> 0000000000085c1b
> [   56.761334][   C16] R13: 1ffff11040b64f8e R14: ffff888450de4a20 R15:
> ffff8888774ec040
> [   56.761372][   C16] FS:  0000000000000000(0000) GS:ffff888454500000(0000)
> knlGS:0000000000000000
> [   56.771374][   C16] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [   56.781370][   C16] CR2: 0000000000000000 CR3: 00000007c9012000 CR4:
> 00000000001406a0
> [   56.791373][   C16] Call Trace:
> [   56.791373][   C16]  ? bus_find_device_by_name+0x20/0x20
> [   56.801334][   C16]  ? kobject_put+0x23/0x250
> [   56.801334][   C16]  walk_memory_blocks+0x6c/0xb8
> [   56.811333][   C16]  ? write_policy_show+0x40/0x40
> [   56.811353][   C16]  link_mem_sections+0x7e/0xa0
> [   56.811353][   C16]  ? unregister_memory_block_under_nodes+0x210/0x210
> [   56.821333][   C16]  ? __register_one_node+0x3bd/0x600
> [   56.831333][   C16]  topology_init+0xbf/0x126
> [   56.831355][   C16]  ? enable_cpu0_hotplug+0x1a/0x1a
> [   56.841334][   C16]  do_one_initcall+0xfe/0x45a
> [   56.841334][   C16]  ? initcall_blacklisted+0x150/0x150
> [   56.851333][   C16]  ? kasan_check_write+0x14/0x20
> [   56.851354][   C16]  ? up_write+0x75/0x140
> [   56.861333][   C16]  kernel_init_freeable+0x619/0x6ac
> [   56.861333][   C16]  ? rest_init+0x188/0x188
> [   56.861369][   C16]  kernel_init+0x11/0x138
> [   56.871333][   C16]  ? rest_init+0x188/0x188
> [   56.871354][   C16]  ret_from_fork+0x22/0x40
> [   64.601362][   C16] rcu: INFO: rcu_sched self-detected stall on CPU
> [   64.611335][   C16] rcu: 	16-....: (5958 ticks this GP)
> idle=37e/1/0x4000000000000002 softirq=27/27 fqs=3000 
> [   64.621334][   C16] 	(t=6002 jiffies g=-1079 q=25)
> [   64.621334][   C16] NMI backtrace for cpu 16
> [   64.621374][   C16] CPU: 16 PID: 1 Comm: swapper/0 Tainted:
> G             L    5.2.0-rc5-next-20190621+ #1
> [   64.631372][   C16] Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385
> Gen10, BIOS A40 03/09/2018
> [   64.641371][   C16] Call Trace:
> [   64.651337][   C16]  <IRQ>
> [   64.651376][   C16]  dump_stack+0x62/0x9a
> [   64.651376][   C16]  nmi_cpu_backtrace.cold.0+0x2e/0x33
> [   64.661337][   C16]  ? nmi_cpu_backtrace_handler+0x20/0x20
> [   64.661337][   C16]  nmi_trigger_cpumask_backtrace+0x1a6/0x1b9
> [   64.671353][   C16]  arch_trigger_cpumask_backtrace+0x19/0x20
> [   64.681366][   C16]  rcu_dump_cpu_stacks+0x18b/0x1d6
> [   64.681366][   C16]  rcu_sched_clock_irq.cold.64+0x368/0x791
> [   64.691336][   C16]  ? kasan_check_read+0x11/0x20
> [   64.691354][   C16]  ? __raise_softirq_irqoff+0x66/0x150
> [   64.701336][   C16]  update_process_times+0x2f/0x60
> [   64.701362][   C16]  tick_periodic+0x38/0xe0
> [   64.711334][   C16]  tick_handle_periodic+0x2e/0x80
> [   64.711353][   C16]  smp_apic_timer_interrupt+0xfb/0x370
> [   64.721367][   C16]  apic_timer_interrupt+0xf/0x20
> [   64.721367][   C16]  </IRQ>
> [   64.721367][   C16] RIP: 0010:_raw_spin_unlock_irqrestore+0x2f/0x40
> [   64.731370][   C16] Code: 55 48 89 e5 41 54 49 89 f4 be 01 00 00 00 53 
> 

Thanks for the report. Man, this series is nastier than I thought. This
is making more noise than I was hoping for.

@Andrew can you revert patch 4-6 for now? I'll be on vacation soon and
don't want cleanups to constantly break things. Just nasty.

-- 

Thanks,

David / dhildenb