[PATCH V2] cxl: Export library to support IBM XSL

[PATCH V2] cxl: Export library to support IBM XSL

[Christophe Lombard]

This patch exports a in-kernel 'library' API which can be called by
other drivers to help interacting with an IBM XSL on a POWER9 system.

The XSL (Translation Service Layer) is a stripped down version of the
PSL (Power Service Layer) used in some cards such as the Mellanox CX5.
Like the PSL, it implements the CAIA architecture, but has a number
of differences, mostly in it's implementation dependent registers.

The XSL also uses a special DMA cxl mode, which uses a slightly
different init sequence for the CAPP and PHB.

Changelog[v2]
 - Rebase to latest upstream.
 - Return -EFAULT in case of NULL pointer in cxllib_handle_fault().
 - Reverse parameters when copro_handle_mm_fault() is called.

Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
---

This applies on top of this patch:
http://patchwork.ozlabs.org/patch/775322/
---
 arch/powerpc/include/asm/opal-api.h |   1 +
 drivers/misc/cxl/Kconfig            |   5 +
 drivers/misc/cxl/Makefile           |   2 +-
 drivers/misc/cxl/cxl.h              |   7 ++
 drivers/misc/cxl/cxllib.c           | 241 ++++++++++++++++++++++++++++++++++++
 drivers/misc/cxl/fault.c            |  25 ++--
 drivers/misc/cxl/native.c           |  16 ++-
 drivers/misc/cxl/pci.c              |  41 +++---
 include/misc/cxllib.h               | 132 ++++++++++++++++++++
 9 files changed, 439 insertions(+), 31 deletions(-)
 create mode 100644 drivers/misc/cxl/cxllib.c
 create mode 100644 include/misc/cxllib.h

diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index cb3e624..3e0be78 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -877,6 +877,7 @@ enum {
 	OPAL_PHB_CAPI_MODE_SNOOP_OFF    = 2,
 	OPAL_PHB_CAPI_MODE_SNOOP_ON	= 3,
 	OPAL_PHB_CAPI_MODE_DMA		= 4,
+	OPAL_PHB_CAPI_MODE_DMA_TVT1	= 5,
 };
 
 /* OPAL I2C request */
diff --git a/drivers/misc/cxl/Kconfig b/drivers/misc/cxl/Kconfig
index b75cf83..93397cb 100644
--- a/drivers/misc/cxl/Kconfig
+++ b/drivers/misc/cxl/Kconfig
@@ -11,11 +11,16 @@ config CXL_AFU_DRIVER_OPS
 	bool
 	default n
 
+config CXL_LIB
+	bool
+	default n
+
 config CXL
 	tristate "Support for IBM Coherent Accelerators (CXL)"
 	depends on PPC_POWERNV && PCI_MSI && EEH
 	select CXL_BASE
 	select CXL_AFU_DRIVER_OPS
+	select CXL_LIB
 	default m
 	help
 	  Select this option to enable driver support for IBM Coherent
diff --git a/drivers/misc/cxl/Makefile b/drivers/misc/cxl/Makefile
index c14fd6b..0b5fd74 100644
--- a/drivers/misc/cxl/Makefile
+++ b/drivers/misc/cxl/Makefile
@@ -3,7 +3,7 @@ ccflags-$(CONFIG_PPC_WERROR)	+= -Werror
 
 cxl-y				+= main.o file.o irq.o fault.o native.o
 cxl-y				+= context.o sysfs.o pci.o trace.o
-cxl-y				+= vphb.o phb.o api.o
+cxl-y				+= vphb.o phb.o api.o cxllib.o
 cxl-$(CONFIG_PPC_PSERIES)	+= flash.o guest.o of.o hcalls.o
 cxl-$(CONFIG_DEBUG_FS)		+= debugfs.o
 obj-$(CONFIG_CXL)		+= cxl.o
diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
index a03f8e7..81e01f0 100644
--- a/drivers/misc/cxl/cxl.h
+++ b/drivers/misc/cxl/cxl.h
@@ -1010,6 +1010,8 @@ static inline void cxl_debugfs_add_afu_regs_psl8(struct cxl_afu *afu, struct den
 
 void cxl_handle_fault(struct work_struct *work);
 void cxl_prefault(struct cxl_context *ctx, u64 wed);
+int cxl_handle_page_fault(bool kernel_context, struct mm_struct *mm,
+			  u64 dsisr, u64 dar);
 
 struct cxl *get_cxl_adapter(int num);
 int cxl_alloc_sst(struct cxl_context *ctx);
@@ -1061,6 +1063,11 @@ int cxl_afu_slbia(struct cxl_afu *afu);
 int cxl_data_cache_flush(struct cxl *adapter);
 int cxl_afu_disable(struct cxl_afu *afu);
 int cxl_psl_purge(struct cxl_afu *afu);
+int cxl_calc_capp_routing(struct pci_dev *dev, u64 *chipid,
+			  u32 *phb_index, u64 *capp_unit_id);
+int cxl_slot_is_switched(struct pci_dev *dev);
+int cxl_get_xsl9_dsnctl(u64 capp_unit_id, u64 *reg);
+u64 cxl_calculate_sr(bool master, bool kernel, bool real_mode, bool p9);
 
 void cxl_native_irq_dump_regs_psl9(struct cxl_context *ctx);
 void cxl_native_irq_dump_regs_psl8(struct cxl_context *ctx);
diff --git a/drivers/misc/cxl/cxllib.c b/drivers/misc/cxl/cxllib.c
new file mode 100644
index 0000000..63b6280
--- /dev/null
+++ b/drivers/misc/cxl/cxllib.c
@@ -0,0 +1,241 @@
+/*
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/hugetlb.h>
+#include <linux/sched/mm.h>
+#include "cxl.h"
+#include <misc/cxllib.h>
+#include <asm/pnv-pci.h>
+
+#define CXL_INVALID_DRA                 ~0ull
+#define CXL_DUMMY_READ_SIZE             128
+#define CXL_DUMMY_READ_ALIGN            8
+#define CXL_CAPI_WINDOW_START           0x2000000000000ull
+#define CXL_CAPI_WINDOW_LOG_SIZE        48
+#define CXL_XSL_CONFIG_CURRENT_VERSION  CXL_XSL_CONFIG_VERSION1
+
+
+bool cxllib_slot_is_supported(struct pci_dev *dev, unsigned long flags)
+{
+	int rc;
+	u32 phb_index;
+	u64 chip_id, capp_unit_id;
+
+	/* Currently none supported */
+	if (flags)
+		return false;
+
+	if (!cpu_has_feature(CPU_FTR_HVMODE))
+		return false;
+
+	if (!cxl_is_power9())
+		return false;
+
+	if (cxl_slot_is_switched(dev))
+		return false;
+
+	/* on p9, some pci slots are not connected to a CAPP unit */
+	rc = cxl_calc_capp_routing(dev, &chip_id, &phb_index, &capp_unit_id);
+	if (rc)
+		return false;
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(cxllib_slot_is_supported);
+
+static DEFINE_MUTEX(dra_mutex);
+static u64 dummy_read_addr = CXL_INVALID_DRA;
+
+int allocate_dummy_read_buf(void)
+{
+	u64 buf, vaddr;
+	size_t buf_size;
+
+	/*
+	 * Dummy read buffer is 128-byte long, aligned on a
+	 * 256-byte boundary and we need the physical address.
+	 */
+	buf_size = CXL_DUMMY_READ_SIZE + (1ull << CXL_DUMMY_READ_ALIGN);
+	buf = (u64) kzalloc(buf_size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	vaddr = (buf + (1ull << CXL_DUMMY_READ_ALIGN) - 1) &
+					(~0ull << CXL_DUMMY_READ_ALIGN);
+
+	WARN((vaddr + CXL_DUMMY_READ_SIZE) > (buf + buf_size),
+		"Dummy read buffer alignment issue");
+	dummy_read_addr = virt_to_phys((void *) vaddr);
+	return 0;
+}
+
+int cxllib_get_xsl_config(struct pci_dev *dev, struct cxllib_xsl_config *cfg)
+{
+	int rc;
+	u32 phb_index;
+	u64 chip_id, capp_unit_id;
+
+	if (!cpu_has_feature(CPU_FTR_HVMODE))
+		return -EINVAL;
+
+	mutex_lock(&dra_mutex);
+	if (dummy_read_addr == CXL_INVALID_DRA) {
+		rc = allocate_dummy_read_buf();
+		if (rc) {
+			mutex_unlock(&dra_mutex);
+			return rc;
+		}
+	}
+	mutex_unlock(&dra_mutex);
+
+	rc = cxl_calc_capp_routing(dev, &chip_id, &phb_index, &capp_unit_id);
+	if (rc)
+		return rc;
+
+	rc = cxl_get_xsl9_dsnctl(capp_unit_id, &cfg->dsnctl);
+	if (rc)
+		return rc;
+	if (cpu_has_feature(CPU_FTR_POWER9_DD1)) {
+		/* workaround for DD1 - nbwind = capiind */
+		cfg->dsnctl |= ((u64)0x02 << (63-47));
+	}
+
+	cfg->version  = CXL_XSL_CONFIG_CURRENT_VERSION;
+	cfg->log_bar_size = CXL_CAPI_WINDOW_LOG_SIZE;
+	cfg->bar_addr = CXL_CAPI_WINDOW_START;
+	cfg->dra = dummy_read_addr;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cxllib_get_xsl_config);
+
+
+int cxllib_switch_phb_mode(struct pci_dev *dev, enum cxllib_mode mode,
+			unsigned long flags)
+{
+	int rc = 0;
+
+	if (!cpu_has_feature(CPU_FTR_HVMODE))
+		return -EINVAL;
+
+	switch (mode) {
+	case CXL_MODE_PCI:
+		/*
+		 * We currently don't support going back to PCI mode
+		 * However, we'll turn the invalidations off, so that
+		 * the CX5 firmware doesn't have to ack them and can do
+		 * things like reset, etc.. with no worries.
+		 * So always return EPERM (can't go back to PCI) or
+		 * EBUSY if we couldn't even turn off snooping
+		 */
+		rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_SNOOP_OFF);
+		if (rc)
+			rc = -EBUSY;
+		else
+			rc = -EPERM;
+		break;
+	case CXL_MODE_CXL:
+		/* DMA only supported on TVT1 for the time being */
+		if (flags != CXL_MODE_DMA_TVT1)
+			return -EINVAL;
+		rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_DMA_TVT1);
+		if (rc)
+			return rc;
+		rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_SNOOP_ON);
+		break;
+	default:
+		rc = -EINVAL;
+	}
+	return rc;
+}
+EXPORT_SYMBOL_GPL(cxllib_switch_phb_mode);
+
+
+int cxllib_set_device_dma(struct pci_dev *dev, unsigned long flags)
+{
+	int rc;
+
+	if (flags)
+		return -EINVAL;
+
+	rc = dma_set_mask(&dev->dev, DMA_BIT_MASK(64));
+	return rc;
+}
+EXPORT_SYMBOL_GPL(cxllib_set_device_dma);
+
+
+int cxllib_get_PE_attributes(struct task_struct *task,
+	     unsigned long translation_mode, struct cxllib_pe_attributes *attr)
+{
+	struct mm_struct *mm = NULL;
+
+	if (translation_mode != CXL_TRANSLATED_MODE &&
+		translation_mode != CXL_REAL_MODE)
+		return -EINVAL;
+
+	attr->sr = cxl_calculate_sr(false /* master */,
+				task == NULL /* kernel ctx */,
+				translation_mode == CXL_REAL_MODE,
+				true /* p9 */);
+	attr->lpid = mfspr(SPRN_LPID);
+	if (task) {
+		mm = get_task_mm(task);
+		if (mm == NULL)
+			return -EINVAL;
+		/*
+		 * Caller is keeping a reference on mm_users for as long
+		 * as XSL uses the memory context
+		 */
+		attr->pid = mm->context.id;
+		mmput(mm);
+	} else {
+		attr->pid = 0;
+	}
+	attr->tid = 0;
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cxllib_get_PE_attributes);
+
+
+int cxllib_handle_fault(struct mm_struct *mm, u64 addr, u64 size, u64 flags)
+{
+	int rc;
+	u64 dar;
+	struct vm_area_struct *vma = NULL;
+	unsigned long page_size;
+
+	if (mm == NULL)
+		return -EFAULT;
+
+	down_read(&mm->mmap_sem);
+
+	for (dar = addr; dar < addr + size; dar += page_size) {
+		if (!vma || dar < vma->vm_start || dar > vma->vm_end) {
+			vma = find_vma(mm, addr);
+			if (!vma) {
+				pr_err("Can't find vma for addr %016llx\n", addr);
+				rc = -EFAULT;
+				goto out;
+			}
+			/* get the size of the pages allocated */
+			page_size = vma_kernel_pagesize(vma);
+		}
+
+		rc = cxl_handle_page_fault(true, mm, flags, dar);
+		if (rc) {
+			pr_err("_cxl_handle_page_fault failed %d", rc);
+			rc = -EFAULT;
+			goto out;
+		}
+	}
+	rc = 0;
+out:
+	up_read(&mm->mmap_sem);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(cxllib_handle_fault);
diff --git a/drivers/misc/cxl/fault.c b/drivers/misc/cxl/fault.c
index c79e39b..9db63f3 100644
--- a/drivers/misc/cxl/fault.c
+++ b/drivers/misc/cxl/fault.c
@@ -132,18 +132,16 @@ static int cxl_handle_segment_miss(struct cxl_context *ctx,
 	return IRQ_HANDLED;
 }
 
-static void cxl_handle_page_fault(struct cxl_context *ctx,
-				  struct mm_struct *mm, u64 dsisr, u64 dar)
+int cxl_handle_page_fault(bool kernel_context,
+			  struct mm_struct *mm, u64 dsisr, u64 dar)
 {
 	unsigned flt = 0;
 	int result;
 	unsigned long access, flags, inv_flags = 0;
 
-	trace_cxl_pte_miss(ctx, dsisr, dar);
-
 	if ((result = copro_handle_mm_fault(mm, dar, dsisr, &flt))) {
 		pr_devel("copro_handle_mm_fault failed: %#x\n", result);
-		return cxl_ack_ae(ctx);
+		return result;
 	}
 
 	if (!radix_enabled()) {
@@ -156,7 +154,7 @@ static void cxl_handle_page_fault(struct cxl_context *ctx,
 			access |= _PAGE_WRITE;
 
 		access |= _PAGE_PRIVILEGED;
-		if ((!ctx->kernel) || (REGION_ID(dar) == USER_REGION_ID))
+		if (!kernel_context || (REGION_ID(dar) == USER_REGION_ID))
 			access &= ~_PAGE_PRIVILEGED;
 
 		if (dsisr & DSISR_NOHPTE)
@@ -166,8 +164,7 @@ static void cxl_handle_page_fault(struct cxl_context *ctx,
 		hash_page_mm(mm, dar, access, 0x300, inv_flags);
 		local_irq_restore(flags);
 	}
-	pr_devel("Page fault successfully handled for pe: %i!\n", ctx->pe);
-	cxl_ops->ack_irq(ctx, CXL_PSL_TFC_An_R, 0);
+	return 0;
 }
 
 /*
@@ -261,9 +258,15 @@ void cxl_handle_fault(struct work_struct *fault_work)
 
 	if (cxl_is_segment_miss(ctx, dsisr))
 		cxl_handle_segment_miss(ctx, mm, dar);
-	else if (cxl_is_page_fault(ctx, dsisr))
-		cxl_handle_page_fault(ctx, mm, dsisr, dar);
-	else
+	else if (cxl_is_page_fault(ctx, dsisr)) {
+		trace_cxl_pte_miss(ctx, dsisr, dar);
+		if (cxl_handle_page_fault(ctx->kernel, mm, dsisr, dar)) {
+			cxl_ack_ae(ctx);
+		} else {
+			pr_devel("Page fault successfully handled for pe: %i!\n", ctx->pe);
+			cxl_ops->ack_irq(ctx, CXL_PSL_TFC_An_R, 0);
+		}
+	} else
 		WARN(1, "cxl_handle_fault has nothing to handle\n");
 
 	if (mm)
diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c
index 2b2f889..4a82c31 100644
--- a/drivers/misc/cxl/native.c
+++ b/drivers/misc/cxl/native.c
@@ -586,17 +586,17 @@ static int activate_afu_directed(struct cxl_afu *afu)
 #define set_endian(sr) ((sr) &= ~(CXL_PSL_SR_An_LE))
 #endif
 
-static u64 calculate_sr(struct cxl_context *ctx)
+u64 cxl_calculate_sr(bool master, bool kernel, bool real_mode, bool p9)
 {
 	u64 sr = 0;
 
 	set_endian(sr);
-	if (ctx->master)
+	if (master)
 		sr |= CXL_PSL_SR_An_MP;
 	if (mfspr(SPRN_LPCR) & LPCR_TC)
 		sr |= CXL_PSL_SR_An_TC;
-	if (ctx->kernel) {
-		if (!ctx->real_mode)
+	if (kernel) {
+		if (!real_mode)
 			sr |= CXL_PSL_SR_An_R;
 		sr |= (mfmsr() & MSR_SF) | CXL_PSL_SR_An_HV;
 	} else {
@@ -608,7 +608,7 @@ static u64 calculate_sr(struct cxl_context *ctx)
 		if (!test_tsk_thread_flag(current, TIF_32BIT))
 			sr |= CXL_PSL_SR_An_SF;
 	}
-	if (cxl_is_power9()) {
+	if (p9) {
 		if (radix_enabled())
 			sr |= CXL_PSL_SR_An_XLAT_ror;
 		else
@@ -617,6 +617,12 @@ static u64 calculate_sr(struct cxl_context *ctx)
 	return sr;
 }
 
+static u64 calculate_sr(struct cxl_context *ctx)
+{
+	return cxl_calculate_sr(ctx->master, ctx->kernel, ctx->real_mode,
+				cxl_is_power9());
+}
+
 static void update_ivtes_directed(struct cxl_context *ctx)
 {
 	bool need_update = (ctx->status == STARTED);
diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
index 1eb9859..d18b3d9 100644
--- a/drivers/misc/cxl/pci.c
+++ b/drivers/misc/cxl/pci.c
@@ -375,7 +375,7 @@ static u64 get_capp_unit_id(struct device_node *np, u32 phb_index)
 	return 0;
 }
 
-static int calc_capp_routing(struct pci_dev *dev, u64 *chipid,
+int cxl_calc_capp_routing(struct pci_dev *dev, u64 *chipid,
 			     u32 *phb_index, u64 *capp_unit_id)
 {
 	int rc;
@@ -408,17 +408,9 @@ static int calc_capp_routing(struct pci_dev *dev, u64 *chipid,
 	return 0;
 }
 
-static int init_implementation_adapter_regs_psl9(struct cxl *adapter, struct pci_dev *dev)
+int cxl_get_xsl9_dsnctl(u64 capp_unit_id, u64 *reg)
 {
-	u64 xsl_dsnctl, psl_fircntl;
-	u64 chipid;
-	u32 phb_index;
-	u64 capp_unit_id;
-	int rc;
-
-	rc = calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
-	if (rc)
-		return rc;
+	u64 xsl_dsnctl;
 
 	/*
 	 * CAPI Identifier bits [0:7]
@@ -454,6 +446,27 @@ static int init_implementation_adapter_regs_psl9(struct cxl *adapter, struct pci
 		xsl_dsnctl |= ((u64)0x04 << (63-55));
 	}
 
+	*reg = xsl_dsnctl;
+	return 0;
+}
+
+static int init_implementation_adapter_regs_psl9(struct cxl *adapter,
+						 struct pci_dev *dev)
+{
+	u64 xsl_dsnctl, psl_fircntl;
+	u64 chipid;
+	u32 phb_index;
+	u64 capp_unit_id;
+	int rc;
+
+	rc = cxl_calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
+	if (rc)
+		return rc;
+
+	rc = cxl_get_xsl9_dsnctl(capp_unit_id, &xsl_dsnctl);
+	if (rc)
+		return rc;
+
 	cxl_p1_write(adapter, CXL_XSL9_DSNCTL, xsl_dsnctl);
 
 	/* Set fir_cntl to recommended value for production env */
@@ -505,7 +518,7 @@ static int init_implementation_adapter_regs_psl8(struct cxl *adapter, struct pci
 	u64 capp_unit_id;
 	int rc;
 
-	rc = calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
+	rc = cxl_calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
 	if (rc)
 		return rc;
 
@@ -538,7 +551,7 @@ static int init_implementation_adapter_regs_xsl(struct cxl *adapter, struct pci_
 	u64 capp_unit_id;
 	int rc;
 
-	rc = calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
+	rc = cxl_calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
 	if (rc)
 		return rc;
 
@@ -1897,7 +1910,7 @@ static void cxl_pci_remove_adapter(struct cxl *adapter)
 
 #define CXL_MAX_PCIEX_PARENT 2
 
-static int cxl_slot_is_switched(struct pci_dev *dev)
+int cxl_slot_is_switched(struct pci_dev *dev)
 {
 	struct device_node *np;
 	int depth = 0;
diff --git a/include/misc/cxllib.h b/include/misc/cxllib.h
new file mode 100644
index 0000000..d2f3358
--- /dev/null
+++ b/include/misc/cxllib.h
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _MISC_CXLLIB_H
+#define _MISC_CXLLIB_H
+
+#include <linux/pci.h>
+#include <asm/reg.h>
+
+/*
+ * cxl driver exports a in-kernel 'library' API which can be called by
+ * other drivers to help interacting with an IBM XSL.
+ */
+
+/*
+ * tells whether capi is supported on the PCIe slot where the
+ * device is seated
+ *
+ * Input:
+ *	dev: device whose slot needs to be checked
+ *	flags: 0 for the time being
+ */
+bool cxllib_slot_is_supported(struct pci_dev *dev, unsigned long flags);
+
+
+/*
+ * Returns the configuration parameters to be used by the XSL or device
+ *
+ * Input:
+ *	dev: device, used to find PHB
+ * Output:
+ *	struct cxllib_xsl_config:
+ *		version
+ *		capi BAR address, i.e. 0x2000000000000-0x2FFFFFFFFFFFF
+ *		capi BAR size
+ *		data send control (XSL_DSNCTL)
+ *		dummy read address (XSL_DRA)
+ */
+#define CXL_XSL_CONFIG_VERSION1		1
+struct cxllib_xsl_config {
+	u32	version;     /* format version for register encoding */
+	u32	log_bar_size;/* log size of the capi_window */
+	u64	bar_addr;    /* address of the start of capi window */
+	u64	dsnctl;      /* matches definition of XSL_DSNCTL */
+	u64	dra;         /* real address that can be used for dummy read */
+};
+
+int cxllib_get_xsl_config(struct pci_dev *dev, struct cxllib_xsl_config *cfg);
+
+
+/*
+ * Activate capi for the pci host bridge associated with the device.
+ * Can be extended to deactivate once we know how to do it.
+ * Device must be ready to accept messages from the CAPP unit and
+ * respond accordingly (TLB invalidates, ...)
+ *
+ * PHB is switched to capi mode through calls to skiboot.
+ * CAPP snooping is activated
+ *
+ * Input:
+ *	dev: device whose PHB should switch mode
+ *	mode: mode to switch to i.e. CAPI or PCI
+ *	flags: options related to the mode
+ */
+enum cxllib_mode {
+	CXL_MODE_CXL,
+	CXL_MODE_PCI,
+};
+
+#define CXL_MODE_NO_DMA       0
+#define CXL_MODE_DMA_TVT0     1
+#define CXL_MODE_DMA_TVT1     2
+
+int cxllib_switch_phb_mode(struct pci_dev *dev, enum cxllib_mode mode,
+			unsigned long flags);
+
+
+/*
+ * Set the device for capi DMA.
+ * Define its dma_ops and dma offset so that allocations will be using TVT#1
+ *
+ * Input:
+ *	dev: device to set
+ *	flags: options. CXL_MODE_DMA_TVT1 should be used
+ */
+int cxllib_set_device_dma(struct pci_dev *dev, unsigned long flags);
+
+
+
+/*
+ * Get the Process Element structure for the given thread
+ *
+ * Input:
+ *	pid: points the struct pid for the given thread (i.e. linux pid)
+ *	translation_mode: whether addresses should be translated
+ */
+struct cxllib_pe_attributes {
+	u64 sr;
+	u32 lpid;
+	u32 tid;
+	u32 pid;
+};
+#define CXL_TRANSLATED_MODE 0
+#define CXL_REAL_MODE 1
+
+int cxllib_get_PE_attributes(struct task_struct *task,
+	     unsigned long translation_mode, struct cxllib_pe_attributes *attr);
+
+
+/*
+ * Handle memory fault.
+ * Fault in all the pages of the specified buffer for the permissions
+ * provided in ‘flags’
+ *
+ * Shouldn't be called from interrupt context
+ *
+ * Input:
+ *	mm: struct mm for the thread faulting the pages
+ *	addr: base address of the buffer to page in
+ *	size: size of the buffer to page in
+ *	flags: permission requested (DSISR_ISSTORE...)
+ */
+int cxllib_handle_fault(struct mm_struct *mm, u64 addr, u64 size, u64 flags);
+
+
+#endif /* _MISC_CXLLIB_H */
-- 
2.7.4

Re: [PATCH V2] cxl: Export library to support IBM XSL

[Frederic Barrat]

Salut Christophe,

A few comments below, nothing major...

Le 14/06/2017 à 15:29, Christophe Lombard a écrit :
> This patch exports a in-kernel 'library' API which can be called by
> other drivers to help interacting with an IBM XSL on a POWER9 system.
> 
> The XSL (Translation Service Layer) is a stripped down version of the
> PSL (Power Service Layer) used in some cards such as the Mellanox CX5.
> Like the PSL, it implements the CAIA architecture, but has a number
> of differences, mostly in it's implementation dependent registers.
> 
> The XSL also uses a special DMA cxl mode, which uses a slightly
> different init sequence for the CAPP and PHB.
> 
> Changelog[v2]
>   - Rebase to latest upstream.
>   - Return -EFAULT in case of NULL pointer in cxllib_handle_fault().
>   - Reverse parameters when copro_handle_mm_fault() is called.
> 


The change log shouldn't be part of the commit message, but below the 
next "---"


> +++ b/drivers/misc/cxl/cxllib.c
> @@ -0,0 +1,241 @@
> +/*
> + * Copyright 2016 IBM Corp.


Year need to be updated


> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + */
> +
> +#include <linux/hugetlb.h>
> +#include <linux/sched/mm.h>
> +#include "cxl.h"
> +#include <misc/cxllib.h>
> +#include <asm/pnv-pci.h>

Ordering of the #include is messy:
#include <linux/hugetlb.h>
#include <linux/sched/mm.h>
#include <asm/pnv-pci.h>
#include <misc/cxllib.h>
#include "cxl.h"



> +int cxllib_set_device_dma(struct pci_dev *dev, unsigned long flags)
> +{
> +	int rc;
> +
> +	if (flags)
> +		return -EINVAL;
> +
> +	rc = dma_set_mask(&dev->dev, DMA_BIT_MASK(64));
> +	return rc;
> +}
> +EXPORT_SYMBOL_GPL(cxllib_set_device_dma);


A comment in cxllib_set_device_dma() would help:
	/*
	 * When switching the PHB to capi mode, the TVT#1 entry for
	 * the Partitionable Endpoint is set in bypass mode, like
	 * in PCI mode.
	 * Configure the device dma to use TVT#1, which is done
	 * by calling dma_set_mask() with a mask large enough.
	 */



> +
> +int cxllib_get_PE_attributes(struct task_struct *task,
> +	     unsigned long translation_mode, struct cxllib_pe_attributes *attr)
> +{
> +	struct mm_struct *mm = NULL;
> +
> +	if (translation_mode != CXL_TRANSLATED_MODE &&
> +		translation_mode != CXL_REAL_MODE)
> +		return -EINVAL;
> +
> +	attr->sr = cxl_calculate_sr(false /* master */,
> +				task == NULL /* kernel ctx */,
> +				translation_mode == CXL_REAL_MODE,
> +				true /* p9 */);
> +	attr->lpid = mfspr(SPRN_LPID);
> +	if (task) {
> +		mm = get_task_mm(task);
> +		if (mm == NULL)
> +			return -EINVAL;
> +		/*
> +		 * Caller is keeping a reference on mm_users for as long
> +		 * as XSL uses the memory context
> +		 */
> +		attr->pid = mm->context.id;
> +		mmput(mm);
> +	} else {
> +		attr->pid = 0;
> +	}
> +	attr->tid = 0;


We'll need to remember to patch that function as welll (attr->tid) when 
we add support for as_notify (even though Mellanox is not expected to 
use as_notify in capi mode, just pci I believe)



> +int cxllib_handle_fault(struct mm_struct *mm, u64 addr, u64 size, u64 flags)
> +{
> +	int rc;
> +	u64 dar;
> +	struct vm_area_struct *vma = NULL;
> +	unsigned long page_size;
> +
> +	if (mm == NULL)
> +		return -EFAULT;
> +
> +	down_read(&mm->mmap_sem);
> +
> +	for (dar = addr; dar < addr + size; dar += page_size) {
> +		if (!vma || dar < vma->vm_start || dar > vma->vm_end) {
> +			vma = find_vma(mm, addr);
> +			if (!vma) {
> +				pr_err("Can't find vma for addr %016llx\n", addr);
> +				rc = -EFAULT;
> +				goto out;
> +			}
> +			/* get the size of the pages allocated */
> +			page_size = vma_kernel_pagesize(vma);
> +		}
> +
> +		rc = cxl_handle_page_fault(true, mm, flags, dar);


Why do we pass "true" for kernel parameter?
Actually do we even need a kernel input parameter for 
cxl_handle_page_fault() ? It seems that we can infer it based on mm. If 
NULL, then we are in kernel space.


> diff --git a/drivers/misc/cxl/fault.c b/drivers/misc/cxl/fault.c
> index c79e39b..9db63f3 100644
> --- a/drivers/misc/cxl/fault.c
> +++ b/drivers/misc/cxl/fault.c
> @@ -132,18 +132,16 @@ static int cxl_handle_segment_miss(struct cxl_context *ctx,
>   	return IRQ_HANDLED;
>   }
> 
> -static void cxl_handle_page_fault(struct cxl_context *ctx,
> -				  struct mm_struct *mm, u64 dsisr, u64 dar)
> +int cxl_handle_page_fault(bool kernel_context,
> +			  struct mm_struct *mm, u64 dsisr, u64 dar)
>   {
>   	unsigned flt = 0;
>   	int result;
>   	unsigned long access, flags, inv_flags = 0;
> 
> -	trace_cxl_pte_miss(ctx, dsisr, dar);
> -
>   	if ((result = copro_handle_mm_fault(mm, dar, dsisr, &flt))) {
>   		pr_devel("copro_handle_mm_fault failed: %#x\n", result);
> -		return cxl_ack_ae(ctx);
> +		return result;
>   	}
> 
>   	if (!radix_enabled()) {
> @@ -156,7 +154,7 @@ static void cxl_handle_page_fault(struct cxl_context *ctx,
>   			access |= _PAGE_WRITE;
> 
>   		access |= _PAGE_PRIVILEGED;
> -		if ((!ctx->kernel) || (REGION_ID(dar) == USER_REGION_ID))
> +		if (!kernel_context || (REGION_ID(dar) == USER_REGION_ID))
>   			access &= ~_PAGE_PRIVILEGED;
> 
>   		if (dsisr & DSISR_NOHPTE)
> @@ -166,8 +164,7 @@ static void cxl_handle_page_fault(struct cxl_context *ctx,
>   		hash_page_mm(mm, dar, access, 0x300, inv_flags);
>   		local_irq_restore(flags);
>   	}
> -	pr_devel("Page fault successfully handled for pe: %i!\n", ctx->pe);
> -	cxl_ops->ack_irq(ctx, CXL_PSL_TFC_An_R, 0);
> +	return 0;
>   }
> 
>   /*
> @@ -261,9 +258,15 @@ void cxl_handle_fault(struct work_struct *fault_work)
> 
>   	if (cxl_is_segment_miss(ctx, dsisr))
>   		cxl_handle_segment_miss(ctx, mm, dar);
> -	else if (cxl_is_page_fault(ctx, dsisr))
> -		cxl_handle_page_fault(ctx, mm, dsisr, dar);
> -	else
> +	else if (cxl_is_page_fault(ctx, dsisr)) {
> +		trace_cxl_pte_miss(ctx, dsisr, dar);
> +		if (cxl_handle_page_fault(ctx->kernel, mm, dsisr, dar)) {
> +			cxl_ack_ae(ctx);
> +		} else {
> +			pr_devel("Page fault successfully handled for pe: %i!\n", ctx->pe);
> +			cxl_ops->ack_irq(ctx, CXL_PSL_TFC_An_R, 0);
> +		}


Could we have that code in a wrapper before calling 
cxl_handle_page_fault()? It would keep the code cleaner and in line with 
what we do for cxl_handle_segment_miss().



> +++ b/include/misc/cxllib.h
> @@ -0,0 +1,132 @@
> +/*
> + * Copyright 2016 IBM Corp.


Year update.


> +/*
> + * Get the Process Element structure for the given thread
> + *
> + * Input:
> + *	pid: points the struct pid for the given thread (i.e. linux pid)
> + *	translation_mode: whether addresses should be translated
> + */
> +struct cxllib_pe_attributes {
> +	u64 sr;
> +	u32 lpid;
> +	u32 tid;
> +	u32 pid;
> +};
> +#define CXL_TRANSLATED_MODE 0
> +#define CXL_REAL_MODE 1
> +
> +int cxllib_get_PE_attributes(struct task_struct *task,
> +	     unsigned long translation_mode, struct cxllib_pe_attributes *attr);


Description in comment no longer matches reality.
/*
  * Get the Process Element structure for the given thread
  *
  * Input:
  *	task: task_struct for the context of the translation
  *	translation_mode: whether addresses should be translated
  * Output:
  *	attr: attributes to fill up the Process Element structure from CAIA
  */


Thanks,

   Fred

Re: [PATCH V2] cxl: Export library to support IBM XSL

[christophe lombard]

Le 15/06/2017 à 14:36, Frederic Barrat a écrit :
> Salut Christophe,
>
> A few comments below, nothing major...
>
> Le 14/06/2017 à 15:29, Christophe Lombard a écrit :
>> This patch exports a in-kernel 'library' API which can be called by
>> other drivers to help interacting with an IBM XSL on a POWER9 system.
>>
>> The XSL (Translation Service Layer) is a stripped down version of the
>> PSL (Power Service Layer) used in some cards such as the Mellanox CX5.
>> Like the PSL, it implements the CAIA architecture, but has a number
>> of differences, mostly in it's implementation dependent registers.
>>
>> The XSL also uses a special DMA cxl mode, which uses a slightly
>> different init sequence for the CAPP and PHB.
>>
>> Changelog[v2]
>>   - Rebase to latest upstream.
>>   - Return -EFAULT in case of NULL pointer in cxllib_handle_fault().
>>   - Reverse parameters when copro_handle_mm_fault() is called.
>>
>
>
> The change log shouldn't be part of the commit message, but below the 
> next "---"
>
>

sure.

>> +++ b/drivers/misc/cxl/cxllib.c
>> @@ -0,0 +1,241 @@
>> +/*
>> + * Copyright 2016 IBM Corp.
>
>
> Year need to be updated
>
>
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License
>> + * as published by the Free Software Foundation; either version
>> + * 2 of the License, or (at your option) any later version.
>> + */
>> +
>> +#include <linux/hugetlb.h>
>> +#include <linux/sched/mm.h>
>> +#include "cxl.h"
>> +#include <misc/cxllib.h>
>> +#include <asm/pnv-pci.h>
>
> Ordering of the #include is messy:
> #include <linux/hugetlb.h>
> #include <linux/sched/mm.h>
> #include <asm/pnv-pci.h>
> #include <misc/cxllib.h>
> #include "cxl.h"
>
>
>
>> +int cxllib_set_device_dma(struct pci_dev *dev, unsigned long flags)
>> +{
>> +    int rc;
>> +
>> +    if (flags)
>> +        return -EINVAL;
>> +
>> +    rc = dma_set_mask(&dev->dev, DMA_BIT_MASK(64));
>> +    return rc;
>> +}
>> +EXPORT_SYMBOL_GPL(cxllib_set_device_dma);
>
>
> A comment in cxllib_set_device_dma() would help:
>     /*
>      * When switching the PHB to capi mode, the TVT#1 entry for
>      * the Partitionable Endpoint is set in bypass mode, like
>      * in PCI mode.
>      * Configure the device dma to use TVT#1, which is done
>      * by calling dma_set_mask() with a mask large enough.
>      */
>
>
>
>> +
>> +int cxllib_get_PE_attributes(struct task_struct *task,
>> +         unsigned long translation_mode, struct cxllib_pe_attributes 
>> *attr)
>> +{
>> +    struct mm_struct *mm = NULL;
>> +
>> +    if (translation_mode != CXL_TRANSLATED_MODE &&
>> +        translation_mode != CXL_REAL_MODE)
>> +        return -EINVAL;
>> +
>> +    attr->sr = cxl_calculate_sr(false /* master */,
>> +                task == NULL /* kernel ctx */,
>> +                translation_mode == CXL_REAL_MODE,
>> +                true /* p9 */);
>> +    attr->lpid = mfspr(SPRN_LPID);
>> +    if (task) {
>> +        mm = get_task_mm(task);
>> +        if (mm == NULL)
>> +            return -EINVAL;
>> +        /*
>> +         * Caller is keeping a reference on mm_users for as long
>> +         * as XSL uses the memory context
>> +         */
>> +        attr->pid = mm->context.id;
>> +        mmput(mm);
>> +    } else {
>> +        attr->pid = 0;
>> +    }
>> +    attr->tid = 0;
>
>
> We'll need to remember to patch that function as welll (attr->tid) 
> when we add support for as_notify (even though Mellanox is not 
> expected to use as_notify in capi mode, just pci I believe)
>
>

yep.


>
>> +int cxllib_handle_fault(struct mm_struct *mm, u64 addr, u64 size, 
>> u64 flags)
>> +{
>> +    int rc;
>> +    u64 dar;
>> +    struct vm_area_struct *vma = NULL;
>> +    unsigned long page_size;
>> +
>> +    if (mm == NULL)
>> +        return -EFAULT;
>> +
>> +    down_read(&mm->mmap_sem);
>> +
>> +    for (dar = addr; dar < addr + size; dar += page_size) {
>> +        if (!vma || dar < vma->vm_start || dar > vma->vm_end) {
>> +            vma = find_vma(mm, addr);
>> +            if (!vma) {
>> +                pr_err("Can't find vma for addr %016llx\n", addr);
>> +                rc = -EFAULT;
>> +                goto out;
>> +            }
>> +            /* get the size of the pages allocated */
>> +            page_size = vma_kernel_pagesize(vma);
>> +        }
>> +
>> +        rc = cxl_handle_page_fault(true, mm, flags, dar);
>
>
> Why do we pass "true" for kernel parameter?
> Actually do we even need a kernel input parameter for 
> cxl_handle_page_fault() ? It seems that we can infer it based on mm. 
> If NULL, then we are in kernel space.
>
>

you are right. Previously, the test was based on the field ctx->kernel. 
This explains the kernel parameter.

>> diff --git a/drivers/misc/cxl/fault.c b/drivers/misc/cxl/fault.c
>> index c79e39b..9db63f3 100644
>> --- a/drivers/misc/cxl/fault.c
>> +++ b/drivers/misc/cxl/fault.c
>> @@ -132,18 +132,16 @@ static int cxl_handle_segment_miss(struct 
>> cxl_context *ctx,
>>       return IRQ_HANDLED;
>>   }
>>
>> -static void cxl_handle_page_fault(struct cxl_context *ctx,
>> -                  struct mm_struct *mm, u64 dsisr, u64 dar)
>> +int cxl_handle_page_fault(bool kernel_context,
>> +              struct mm_struct *mm, u64 dsisr, u64 dar)
>>   {
>>       unsigned flt = 0;
>>       int result;
>>       unsigned long access, flags, inv_flags = 0;
>>
>> -    trace_cxl_pte_miss(ctx, dsisr, dar);
>> -
>>       if ((result = copro_handle_mm_fault(mm, dar, dsisr, &flt))) {
>>           pr_devel("copro_handle_mm_fault failed: %#x\n", result);
>> -        return cxl_ack_ae(ctx);
>> +        return result;
>>       }
>>
>>       if (!radix_enabled()) {
>> @@ -156,7 +154,7 @@ static void cxl_handle_page_fault(struct 
>> cxl_context *ctx,
>>               access |= _PAGE_WRITE;
>>
>>           access |= _PAGE_PRIVILEGED;
>> -        if ((!ctx->kernel) || (REGION_ID(dar) == USER_REGION_ID))
>> +        if (!kernel_context || (REGION_ID(dar) == USER_REGION_ID))
>>               access &= ~_PAGE_PRIVILEGED;
>>
>>           if (dsisr & DSISR_NOHPTE)
>> @@ -166,8 +164,7 @@ static void cxl_handle_page_fault(struct 
>> cxl_context *ctx,
>>           hash_page_mm(mm, dar, access, 0x300, inv_flags);
>>           local_irq_restore(flags);
>>       }
>> -    pr_devel("Page fault successfully handled for pe: %i!\n", ctx->pe);
>> -    cxl_ops->ack_irq(ctx, CXL_PSL_TFC_An_R, 0);
>> +    return 0;
>>   }
>>
>>   /*
>> @@ -261,9 +258,15 @@ void cxl_handle_fault(struct work_struct 
>> *fault_work)
>>
>>       if (cxl_is_segment_miss(ctx, dsisr))
>>           cxl_handle_segment_miss(ctx, mm, dar);
>> -    else if (cxl_is_page_fault(ctx, dsisr))
>> -        cxl_handle_page_fault(ctx, mm, dsisr, dar);
>> -    else
>> +    else if (cxl_is_page_fault(ctx, dsisr)) {
>> +        trace_cxl_pte_miss(ctx, dsisr, dar);
>> +        if (cxl_handle_page_fault(ctx->kernel, mm, dsisr, dar)) {
>> +            cxl_ack_ae(ctx);
>> +        } else {
>> +            pr_devel("Page fault successfully handled for pe: 
>> %i!\n", ctx->pe);
>> +            cxl_ops->ack_irq(ctx, CXL_PSL_TFC_An_R, 0);
>> +        }
>
>
> Could we have that code in a wrapper before calling 
> cxl_handle_page_fault()? It would keep the code cleaner and in line 
> with what we do for cxl_handle_segment_miss().
>

We can try to to that.


>
>
>> +++ b/include/misc/cxllib.h
>> @@ -0,0 +1,132 @@
>> +/*
>> + * Copyright 2016 IBM Corp.
>
>
> Year update.
>
>
>> +/*
>> + * Get the Process Element structure for the given thread
>> + *
>> + * Input:
>> + *    pid: points the struct pid for the given thread (i.e. linux pid)
>> + *    translation_mode: whether addresses should be translated
>> + */
>> +struct cxllib_pe_attributes {
>> +    u64 sr;
>> +    u32 lpid;
>> +    u32 tid;
>> +    u32 pid;
>> +};
>> +#define CXL_TRANSLATED_MODE 0
>> +#define CXL_REAL_MODE 1
>> +
>> +int cxllib_get_PE_attributes(struct task_struct *task,
>> +         unsigned long translation_mode, struct cxllib_pe_attributes 
>> *attr);
>
>
> Description in comment no longer matches reality.
> /*
>  * Get the Process Element structure for the given thread
>  *
>  * Input:
>  *    task: task_struct for the context of the translation
>  *    translation_mode: whether addresses should be translated
>  * Output:
>  *    attr: attributes to fill up the Process Element structure from CAIA
>  */
>
>
> Thanks,
>
>   Fred

Re: [PATCH V2] cxl: Export library to support IBM XSL

[Andrew Donnellan]

On 14/06/17 23:29, Christophe Lombard wrote:
> This patch exports a in-kernel 'library' API which can be called by
> other drivers to help interacting with an IBM XSL on a POWER9 system.
>
> The XSL (Translation Service Layer) is a stripped down version of the
> PSL (Power Service Layer) used in some cards such as the Mellanox CX5.
> Like the PSL, it implements the CAIA architecture, but has a number
> of differences, mostly in it's implementation dependent registers.
>
> The XSL also uses a special DMA cxl mode, which uses a slightly
> different init sequence for the CAPP and PHB.
>
> Changelog[v2]
>  - Rebase to latest upstream.
>  - Return -EFAULT in case of NULL pointer in cxllib_handle_fault().
>  - Reverse parameters when copro_handle_mm_fault() is called.
>
> Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>

For the parts of this I wrote:

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>

I'll skip the comments that Fred's already made, some minor comments below.

> ---
>
> This applies on top of this patch:
> http://patchwork.ozlabs.org/patch/775322/
> ---
>  arch/powerpc/include/asm/opal-api.h |   1 +
>  drivers/misc/cxl/Kconfig            |   5 +
>  drivers/misc/cxl/Makefile           |   2 +-
>  drivers/misc/cxl/cxl.h              |   7 ++
>  drivers/misc/cxl/cxllib.c           | 241 ++++++++++++++++++++++++++++++++++++
>  drivers/misc/cxl/fault.c            |  25 ++--
>  drivers/misc/cxl/native.c           |  16 ++-
>  drivers/misc/cxl/pci.c              |  41 +++---
>  include/misc/cxllib.h               | 132 ++++++++++++++++++++
>  9 files changed, 439 insertions(+), 31 deletions(-)
>  create mode 100644 drivers/misc/cxl/cxllib.c
>  create mode 100644 include/misc/cxllib.h
>
> diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
> index cb3e624..3e0be78 100644
> --- a/arch/powerpc/include/asm/opal-api.h
> +++ b/arch/powerpc/include/asm/opal-api.h
> @@ -877,6 +877,7 @@ enum {
>  	OPAL_PHB_CAPI_MODE_SNOOP_OFF    = 2,
>  	OPAL_PHB_CAPI_MODE_SNOOP_ON	= 3,
>  	OPAL_PHB_CAPI_MODE_DMA		= 4,
> +	OPAL_PHB_CAPI_MODE_DMA_TVT1	= 5,
>  };
>
>  /* OPAL I2C request */
> diff --git a/drivers/misc/cxl/Kconfig b/drivers/misc/cxl/Kconfig
> index b75cf83..93397cb 100644
> --- a/drivers/misc/cxl/Kconfig
> +++ b/drivers/misc/cxl/Kconfig
> @@ -11,11 +11,16 @@ config CXL_AFU_DRIVER_OPS
>  	bool
>  	default n
>
> +config CXL_LIB
> +	bool
> +	default n
> +

How necessary is this? Are there any drivers using cxllib that we're 
trying to get in during this cycle?

>  config CXL
>  	tristate "Support for IBM Coherent Accelerators (CXL)"
>  	depends on PPC_POWERNV && PCI_MSI && EEH
>  	select CXL_BASE
>  	select CXL_AFU_DRIVER_OPS
> +	select CXL_LIB
>  	default m
>  	help
>  	  Select this option to enable driver support for IBM Coherent
> diff --git a/drivers/misc/cxl/Makefile b/drivers/misc/cxl/Makefile
> index c14fd6b..0b5fd74 100644
> --- a/drivers/misc/cxl/Makefile
> +++ b/drivers/misc/cxl/Makefile
> @@ -3,7 +3,7 @@ ccflags-$(CONFIG_PPC_WERROR)	+= -Werror
>
>  cxl-y				+= main.o file.o irq.o fault.o native.o
>  cxl-y				+= context.o sysfs.o pci.o trace.o
> -cxl-y				+= vphb.o phb.o api.o
> +cxl-y				+= vphb.o phb.o api.o cxllib.o
>  cxl-$(CONFIG_PPC_PSERIES)	+= flash.o guest.o of.o hcalls.o
>  cxl-$(CONFIG_DEBUG_FS)		+= debugfs.o
>  obj-$(CONFIG_CXL)		+= cxl.o
> diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h
> index a03f8e7..81e01f0 100644
> --- a/drivers/misc/cxl/cxl.h
> +++ b/drivers/misc/cxl/cxl.h
> @@ -1010,6 +1010,8 @@ static inline void cxl_debugfs_add_afu_regs_psl8(struct cxl_afu *afu, struct den
>
>  void cxl_handle_fault(struct work_struct *work);
>  void cxl_prefault(struct cxl_context *ctx, u64 wed);
> +int cxl_handle_page_fault(bool kernel_context, struct mm_struct *mm,
> +			  u64 dsisr, u64 dar);
>
>  struct cxl *get_cxl_adapter(int num);
>  int cxl_alloc_sst(struct cxl_context *ctx);
> @@ -1061,6 +1063,11 @@ int cxl_afu_slbia(struct cxl_afu *afu);
>  int cxl_data_cache_flush(struct cxl *adapter);
>  int cxl_afu_disable(struct cxl_afu *afu);
>  int cxl_psl_purge(struct cxl_afu *afu);
> +int cxl_calc_capp_routing(struct pci_dev *dev, u64 *chipid,
> +			  u32 *phb_index, u64 *capp_unit_id);
> +int cxl_slot_is_switched(struct pci_dev *dev);
> +int cxl_get_xsl9_dsnctl(u64 capp_unit_id, u64 *reg);
> +u64 cxl_calculate_sr(bool master, bool kernel, bool real_mode, bool p9);
>
>  void cxl_native_irq_dump_regs_psl9(struct cxl_context *ctx);
>  void cxl_native_irq_dump_regs_psl8(struct cxl_context *ctx);
> diff --git a/drivers/misc/cxl/cxllib.c b/drivers/misc/cxl/cxllib.c
> new file mode 100644
> index 0000000..63b6280
> --- /dev/null
> +++ b/drivers/misc/cxl/cxllib.c
> @@ -0,0 +1,241 @@
> +/*
> + * Copyright 2016 IBM Corp.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + */
> +
> +#include <linux/hugetlb.h>
> +#include <linux/sched/mm.h>
> +#include "cxl.h"
> +#include <misc/cxllib.h>
> +#include <asm/pnv-pci.h>
> +
> +#define CXL_INVALID_DRA                 ~0ull
> +#define CXL_DUMMY_READ_SIZE             128
> +#define CXL_DUMMY_READ_ALIGN            8
> +#define CXL_CAPI_WINDOW_START           0x2000000000000ull
> +#define CXL_CAPI_WINDOW_LOG_SIZE        48
> +#define CXL_XSL_CONFIG_CURRENT_VERSION  CXL_XSL_CONFIG_VERSION1
> +
> +
> +bool cxllib_slot_is_supported(struct pci_dev *dev, unsigned long flags)
> +{
> +	int rc;
> +	u32 phb_index;
> +	u64 chip_id, capp_unit_id;
> +
> +	/* Currently none supported */

"No flags currently supported" would be clearer

> +	if (flags)
> +		return false;
> +
> +	if (!cpu_has_feature(CPU_FTR_HVMODE))
> +		return false;
> +
> +	if (!cxl_is_power9())
> +		return false;
> +
> +	if (cxl_slot_is_switched(dev))
> +		return false;
> +
> +	/* on p9, some pci slots are not connected to a CAPP unit */
> +	rc = cxl_calc_capp_routing(dev, &chip_id, &phb_index, &capp_unit_id);
> +	if (rc)
> +		return false;
> +
> +	return true;
> +}
> +EXPORT_SYMBOL_GPL(cxllib_slot_is_supported);
> +
> +static DEFINE_MUTEX(dra_mutex);
> +static u64 dummy_read_addr = CXL_INVALID_DRA;
> +
> +int allocate_dummy_read_buf(void)

static?

> +{
> +	u64 buf, vaddr;
> +	size_t buf_size;
> +
> +	/*
> +	 * Dummy read buffer is 128-byte long, aligned on a
> +	 * 256-byte boundary and we need the physical address.
> +	 */
> +	buf_size = CXL_DUMMY_READ_SIZE + (1ull << CXL_DUMMY_READ_ALIGN);
> +	buf = (u64) kzalloc(buf_size, GFP_KERNEL);
> +	if (!buf)
> +		return -ENOMEM;
> +
> +	vaddr = (buf + (1ull << CXL_DUMMY_READ_ALIGN) - 1) &
> +					(~0ull << CXL_DUMMY_READ_ALIGN);
> +
> +	WARN((vaddr + CXL_DUMMY_READ_SIZE) > (buf + buf_size),
> +		"Dummy read buffer alignment issue");
> +	dummy_read_addr = virt_to_phys((void *) vaddr);
> +	return 0;
> +}
> +
> +int cxllib_get_xsl_config(struct pci_dev *dev, struct cxllib_xsl_config *cfg)
> +{
> +	int rc;
> +	u32 phb_index;
> +	u64 chip_id, capp_unit_id;
> +
> +	if (!cpu_has_feature(CPU_FTR_HVMODE))
> +		return -EINVAL;
> +
> +	mutex_lock(&dra_mutex);
> +	if (dummy_read_addr == CXL_INVALID_DRA) {
> +		rc = allocate_dummy_read_buf();
> +		if (rc) {
> +			mutex_unlock(&dra_mutex);
> +			return rc;
> +		}
> +	}
> +	mutex_unlock(&dra_mutex);
> +
> +	rc = cxl_calc_capp_routing(dev, &chip_id, &phb_index, &capp_unit_id);
> +	if (rc)
> +		return rc;
> +
> +	rc = cxl_get_xsl9_dsnctl(capp_unit_id, &cfg->dsnctl);
> +	if (rc)
> +		return rc;
> +	if (cpu_has_feature(CPU_FTR_POWER9_DD1)) {
> +		/* workaround for DD1 - nbwind = capiind */
> +		cfg->dsnctl |= ((u64)0x02 << (63-47));
> +	}
> +
> +	cfg->version  = CXL_XSL_CONFIG_CURRENT_VERSION;
> +	cfg->log_bar_size = CXL_CAPI_WINDOW_LOG_SIZE;
> +	cfg->bar_addr = CXL_CAPI_WINDOW_START;
> +	cfg->dra = dummy_read_addr;
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(cxllib_get_xsl_config);
> +
> +
> +int cxllib_switch_phb_mode(struct pci_dev *dev, enum cxllib_mode mode,
> +			unsigned long flags)
> +{
> +	int rc = 0;
> +
> +	if (!cpu_has_feature(CPU_FTR_HVMODE))
> +		return -EINVAL;
> +
> +	switch (mode) {
> +	case CXL_MODE_PCI:
> +		/*
> +		 * We currently don't support going back to PCI mode
> +		 * However, we'll turn the invalidations off, so that
> +		 * the CX5 firmware doesn't have to ack them and can do
> +		 * things like reset, etc.. with no worries.
> +		 * So always return EPERM (can't go back to PCI) or
> +		 * EBUSY if we couldn't even turn off snooping
> +		 */

This comment shouldn't be CX5 specific

> +		rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_SNOOP_OFF);
> +		if (rc)
> +			rc = -EBUSY;
> +		else
> +			rc = -EPERM;
> +		break;
> +	case CXL_MODE_CXL:
> +		/* DMA only supported on TVT1 for the time being */
> +		if (flags != CXL_MODE_DMA_TVT1)
> +			return -EINVAL;
> +		rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_DMA_TVT1);
> +		if (rc)
> +			return rc;
> +		rc = pnv_phb_to_cxl_mode(dev, OPAL_PHB_CAPI_MODE_SNOOP_ON);
> +		break;
> +	default:
> +		rc = -EINVAL;
> +	}
> +	return rc;
> +}
> +EXPORT_SYMBOL_GPL(cxllib_switch_phb_mode);
> +
> +
> +int cxllib_set_device_dma(struct pci_dev *dev, unsigned long flags)
> +{
> +	int rc;
> +
> +	if (flags)
> +		return -EINVAL;
> +
> +	rc = dma_set_mask(&dev->dev, DMA_BIT_MASK(64));
> +	return rc;
> +}
> +EXPORT_SYMBOL_GPL(cxllib_set_device_dma);
> +
> +
> +int cxllib_get_PE_attributes(struct task_struct *task,
> +	     unsigned long translation_mode, struct cxllib_pe_attributes *attr)
> +{
> +	struct mm_struct *mm = NULL;
> +
> +	if (translation_mode != CXL_TRANSLATED_MODE &&
> +		translation_mode != CXL_REAL_MODE)
> +		return -EINVAL;
> +
> +	attr->sr = cxl_calculate_sr(false /* master */,
> +				task == NULL /* kernel ctx */,
> +				translation_mode == CXL_REAL_MODE,
> +				true /* p9 */);

nitpicking: comments in the middle of a line feels slightly ugly to me :)

> +	attr->lpid = mfspr(SPRN_LPID);
> +	if (task) {
> +		mm = get_task_mm(task);
> +		if (mm == NULL)
> +			return -EINVAL;
> +		/*
> +		 * Caller is keeping a reference on mm_users for as long
> +		 * as XSL uses the memory context
> +		 */
> +		attr->pid = mm->context.id;
> +		mmput(mm);
> +	} else {
> +		attr->pid = 0;
> +	}
> +	attr->tid = 0;
> +	return 0;
> +}
> +EXPORT_SYMBOL_GPL(cxllib_get_PE_attributes);
> +
> +
> +int cxllib_handle_fault(struct mm_struct *mm, u64 addr, u64 size, u64 flags)
> +{
> +	int rc;
> +	u64 dar;
> +	struct vm_area_struct *vma = NULL;
> +	unsigned long page_size;
> +
> +	if (mm == NULL)
> +		return -EFAULT;
> +
> +	down_read(&mm->mmap_sem);
> +
> +	for (dar = addr; dar < addr + size; dar += page_size) {
> +		if (!vma || dar < vma->vm_start || dar > vma->vm_end) {
> +			vma = find_vma(mm, addr);
> +			if (!vma) {
> +				pr_err("Can't find vma for addr %016llx\n", addr);
> +				rc = -EFAULT;
> +				goto out;
> +			}
> +			/* get the size of the pages allocated */
> +			page_size = vma_kernel_pagesize(vma);
> +		}
> +
> +		rc = cxl_handle_page_fault(true, mm, flags, dar);
> +		if (rc) {
> +			pr_err("_cxl_handle_page_fault failed %d", rc);

Get rid of the initial underscore, that's just left over from an early 
version of this code

> +			rc = -EFAULT;
> +			goto out;
> +		}
> +	}
> +	rc = 0;
> +out:
> +	up_read(&mm->mmap_sem);
> +	return rc;
> +}
> +EXPORT_SYMBOL_GPL(cxllib_handle_fault);
> diff --git a/drivers/misc/cxl/fault.c b/drivers/misc/cxl/fault.c
> index c79e39b..9db63f3 100644
> --- a/drivers/misc/cxl/fault.c
> +++ b/drivers/misc/cxl/fault.c
> @@ -132,18 +132,16 @@ static int cxl_handle_segment_miss(struct cxl_context *ctx,
>  	return IRQ_HANDLED;
>  }
>
> -static void cxl_handle_page_fault(struct cxl_context *ctx,
> -				  struct mm_struct *mm, u64 dsisr, u64 dar)
> +int cxl_handle_page_fault(bool kernel_context,
> +			  struct mm_struct *mm, u64 dsisr, u64 dar)

If we don't get rid of kernel_context per Fred, it would look cleaner to 
move it to the end of the argument list.

>  {
>  	unsigned flt = 0;
>  	int result;
>  	unsigned long access, flags, inv_flags = 0;
>
> -	trace_cxl_pte_miss(ctx, dsisr, dar);
> -
>  	if ((result = copro_handle_mm_fault(mm, dar, dsisr, &flt))) {
>  		pr_devel("copro_handle_mm_fault failed: %#x\n", result);
> -		return cxl_ack_ae(ctx);
> +		return result;
>  	}
>
>  	if (!radix_enabled()) {
> @@ -156,7 +154,7 @@ static void cxl_handle_page_fault(struct cxl_context *ctx,
>  			access |= _PAGE_WRITE;
>
>  		access |= _PAGE_PRIVILEGED;
> -		if ((!ctx->kernel) || (REGION_ID(dar) == USER_REGION_ID))
> +		if (!kernel_context || (REGION_ID(dar) == USER_REGION_ID))
>  			access &= ~_PAGE_PRIVILEGED;

While we're here...

if (kernel_context && (REGION_ID(dar) != USER_REGION_ID))
	access |= _PAGE_PRIVILEGED;

>
>  		if (dsisr & DSISR_NOHPTE)
> @@ -166,8 +164,7 @@ static void cxl_handle_page_fault(struct cxl_context *ctx,
>  		hash_page_mm(mm, dar, access, 0x300, inv_flags);
>  		local_irq_restore(flags);
>  	}
> -	pr_devel("Page fault successfully handled for pe: %i!\n", ctx->pe);
> -	cxl_ops->ack_irq(ctx, CXL_PSL_TFC_An_R, 0);
> +	return 0;
>  }
>
>  /*
> @@ -261,9 +258,15 @@ void cxl_handle_fault(struct work_struct *fault_work)
>
>  	if (cxl_is_segment_miss(ctx, dsisr))
>  		cxl_handle_segment_miss(ctx, mm, dar);
> -	else if (cxl_is_page_fault(ctx, dsisr))
> -		cxl_handle_page_fault(ctx, mm, dsisr, dar);
> -	else
> +	else if (cxl_is_page_fault(ctx, dsisr)) {
> +		trace_cxl_pte_miss(ctx, dsisr, dar);
> +		if (cxl_handle_page_fault(ctx->kernel, mm, dsisr, dar)) {
> +			cxl_ack_ae(ctx);
> +		} else {
> +			pr_devel("Page fault successfully handled for pe: %i!\n", ctx->pe);
> +			cxl_ops->ack_irq(ctx, CXL_PSL_TFC_An_R, 0);
> +		}
> +	} else
>  		WARN(1, "cxl_handle_fault has nothing to handle\n");
>
>  	if (mm)
> diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c
> index 2b2f889..4a82c31 100644
> --- a/drivers/misc/cxl/native.c
> +++ b/drivers/misc/cxl/native.c
> @@ -586,17 +586,17 @@ static int activate_afu_directed(struct cxl_afu *afu)
>  #define set_endian(sr) ((sr) &= ~(CXL_PSL_SR_An_LE))
>  #endif
>
> -static u64 calculate_sr(struct cxl_context *ctx)
> +u64 cxl_calculate_sr(bool master, bool kernel, bool real_mode, bool p9)
>  {
>  	u64 sr = 0;
>
>  	set_endian(sr);
> -	if (ctx->master)
> +	if (master)
>  		sr |= CXL_PSL_SR_An_MP;
>  	if (mfspr(SPRN_LPCR) & LPCR_TC)
>  		sr |= CXL_PSL_SR_An_TC;
> -	if (ctx->kernel) {
> -		if (!ctx->real_mode)
> +	if (kernel) {
> +		if (!real_mode)
>  			sr |= CXL_PSL_SR_An_R;
>  		sr |= (mfmsr() & MSR_SF) | CXL_PSL_SR_An_HV;
>  	} else {
> @@ -608,7 +608,7 @@ static u64 calculate_sr(struct cxl_context *ctx)
>  		if (!test_tsk_thread_flag(current, TIF_32BIT))
>  			sr |= CXL_PSL_SR_An_SF;
>  	}
> -	if (cxl_is_power9()) {
> +	if (p9) {
>  		if (radix_enabled())
>  			sr |= CXL_PSL_SR_An_XLAT_ror;
>  		else
> @@ -617,6 +617,12 @@ static u64 calculate_sr(struct cxl_context *ctx)
>  	return sr;
>  }
>
> +static u64 calculate_sr(struct cxl_context *ctx)
> +{
> +	return cxl_calculate_sr(ctx->master, ctx->kernel, ctx->real_mode,
> +				cxl_is_power9());
> +}
> +
>  static void update_ivtes_directed(struct cxl_context *ctx)
>  {
>  	bool need_update = (ctx->status == STARTED);
> diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c
> index 1eb9859..d18b3d9 100644
> --- a/drivers/misc/cxl/pci.c
> +++ b/drivers/misc/cxl/pci.c
> @@ -375,7 +375,7 @@ static u64 get_capp_unit_id(struct device_node *np, u32 phb_index)
>  	return 0;
>  }
>
> -static int calc_capp_routing(struct pci_dev *dev, u64 *chipid,
> +int cxl_calc_capp_routing(struct pci_dev *dev, u64 *chipid,
>  			     u32 *phb_index, u64 *capp_unit_id)
>  {
>  	int rc;
> @@ -408,17 +408,9 @@ static int calc_capp_routing(struct pci_dev *dev, u64 *chipid,
>  	return 0;
>  }
>
> -static int init_implementation_adapter_regs_psl9(struct cxl *adapter, struct pci_dev *dev)
> +int cxl_get_xsl9_dsnctl(u64 capp_unit_id, u64 *reg)
>  {
> -	u64 xsl_dsnctl, psl_fircntl;
> -	u64 chipid;
> -	u32 phb_index;
> -	u64 capp_unit_id;
> -	int rc;
> -
> -	rc = calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
> -	if (rc)
> -		return rc;
> +	u64 xsl_dsnctl;
>
>  	/*
>  	 * CAPI Identifier bits [0:7]
> @@ -454,6 +446,27 @@ static int init_implementation_adapter_regs_psl9(struct cxl *adapter, struct pci
>  		xsl_dsnctl |= ((u64)0x04 << (63-55));
>  	}
>
> +	*reg = xsl_dsnctl;
> +	return 0;
> +}
> +
> +static int init_implementation_adapter_regs_psl9(struct cxl *adapter,
> +						 struct pci_dev *dev)
> +{
> +	u64 xsl_dsnctl, psl_fircntl;
> +	u64 chipid;
> +	u32 phb_index;
> +	u64 capp_unit_id;
> +	int rc;
> +
> +	rc = cxl_calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
> +	if (rc)
> +		return rc;
> +
> +	rc = cxl_get_xsl9_dsnctl(capp_unit_id, &xsl_dsnctl);
> +	if (rc)
> +		return rc;
> +
>  	cxl_p1_write(adapter, CXL_XSL9_DSNCTL, xsl_dsnctl);
>
>  	/* Set fir_cntl to recommended value for production env */
> @@ -505,7 +518,7 @@ static int init_implementation_adapter_regs_psl8(struct cxl *adapter, struct pci
>  	u64 capp_unit_id;
>  	int rc;
>
> -	rc = calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
> +	rc = cxl_calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
>  	if (rc)
>  		return rc;
>
> @@ -538,7 +551,7 @@ static int init_implementation_adapter_regs_xsl(struct cxl *adapter, struct pci_
>  	u64 capp_unit_id;
>  	int rc;
>
> -	rc = calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
> +	rc = cxl_calc_capp_routing(dev, &chipid, &phb_index, &capp_unit_id);
>  	if (rc)
>  		return rc;
>
> @@ -1897,7 +1910,7 @@ static void cxl_pci_remove_adapter(struct cxl *adapter)
>
>  #define CXL_MAX_PCIEX_PARENT 2
>
> -static int cxl_slot_is_switched(struct pci_dev *dev)
> +int cxl_slot_is_switched(struct pci_dev *dev)
>  {
>  	struct device_node *np;
>  	int depth = 0;
> diff --git a/include/misc/cxllib.h b/include/misc/cxllib.h
> new file mode 100644
> index 0000000..d2f3358
> --- /dev/null
> +++ b/include/misc/cxllib.h
> @@ -0,0 +1,132 @@
> +/*
> + * Copyright 2016 IBM Corp.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + */
> +
> +#ifndef _MISC_CXLLIB_H
> +#define _MISC_CXLLIB_H
> +
> +#include <linux/pci.h>
> +#include <asm/reg.h>
> +
> +/*
> + * cxl driver exports a in-kernel 'library' API which can be called by
> + * other drivers to help interacting with an IBM XSL.
> + */
> +
> +/*
> + * tells whether capi is supported on the PCIe slot where the
> + * device is seated
> + *
> + * Input:
> + *	dev: device whose slot needs to be checked
> + *	flags: 0 for the time being
> + */
> +bool cxllib_slot_is_supported(struct pci_dev *dev, unsigned long flags);
> +
> +
> +/*
> + * Returns the configuration parameters to be used by the XSL or device
> + *
> + * Input:
> + *	dev: device, used to find PHB
> + * Output:
> + *	struct cxllib_xsl_config:
> + *		version
> + *		capi BAR address, i.e. 0x2000000000000-0x2FFFFFFFFFFFF
> + *		capi BAR size
> + *		data send control (XSL_DSNCTL)
> + *		dummy read address (XSL_DRA)
> + */
> +#define CXL_XSL_CONFIG_VERSION1		1
> +struct cxllib_xsl_config {
> +	u32	version;     /* format version for register encoding */
> +	u32	log_bar_size;/* log size of the capi_window */
> +	u64	bar_addr;    /* address of the start of capi window */
> +	u64	dsnctl;      /* matches definition of XSL_DSNCTL */
> +	u64	dra;         /* real address that can be used for dummy read */
> +};
> +
> +int cxllib_get_xsl_config(struct pci_dev *dev, struct cxllib_xsl_config *cfg);
> +
> +
> +/*
> + * Activate capi for the pci host bridge associated with the device.
> + * Can be extended to deactivate once we know how to do it.
> + * Device must be ready to accept messages from the CAPP unit and
> + * respond accordingly (TLB invalidates, ...)
> + *
> + * PHB is switched to capi mode through calls to skiboot.
> + * CAPP snooping is activated
> + *
> + * Input:
> + *	dev: device whose PHB should switch mode
> + *	mode: mode to switch to i.e. CAPI or PCI
> + *	flags: options related to the mode
> + */
> +enum cxllib_mode {
> +	CXL_MODE_CXL,
> +	CXL_MODE_PCI,
> +};
> +
> +#define CXL_MODE_NO_DMA       0
> +#define CXL_MODE_DMA_TVT0     1
> +#define CXL_MODE_DMA_TVT1     2
> +
> +int cxllib_switch_phb_mode(struct pci_dev *dev, enum cxllib_mode mode,
> +			unsigned long flags);
> +
> +
> +/*
> + * Set the device for capi DMA.
> + * Define its dma_ops and dma offset so that allocations will be using TVT#1
> + *
> + * Input:
> + *	dev: device to set
> + *	flags: options. CXL_MODE_DMA_TVT1 should be used
> + */
> +int cxllib_set_device_dma(struct pci_dev *dev, unsigned long flags);
> +
> +
> +
> +/*
> + * Get the Process Element structure for the given thread
> + *
> + * Input:
> + *	pid: points the struct pid for the given thread (i.e. linux pid)
> + *	translation_mode: whether addresses should be translated
> + */
> +struct cxllib_pe_attributes {
> +	u64 sr;
> +	u32 lpid;
> +	u32 tid;
> +	u32 pid;
> +};
> +#define CXL_TRANSLATED_MODE 0
> +#define CXL_REAL_MODE 1
> +
> +int cxllib_get_PE_attributes(struct task_struct *task,
> +	     unsigned long translation_mode, struct cxllib_pe_attributes *attr);
> +
> +
> +/*
> + * Handle memory fault.
> + * Fault in all the pages of the specified buffer for the permissions
> + * provided in ‘flags’
> + *
> + * Shouldn't be called from interrupt context
> + *
> + * Input:
> + *	mm: struct mm for the thread faulting the pages
> + *	addr: base address of the buffer to page in
> + *	size: size of the buffer to page in
> + *	flags: permission requested (DSISR_ISSTORE...)
> + */
> +int cxllib_handle_fault(struct mm_struct *mm, u64 addr, u64 size, u64 flags);
> +
> +
> +#endif /* _MISC_CXLLIB_H */
>

-- 
Andrew Donnellan              OzLabs, ADL Canberra
andrew.donnellan@au1.ibm.com  IBM Australia Limited

Re: [PATCH V2] cxl: Export library to support IBM XSL

[Frederic Barrat]

Le 16/06/2017 à 09:13, Andrew Donnellan a écrit :
>>
>> +config CXL_LIB
>> +    bool
>> +    default n
>> +
> 
> How necessary is this? Are there any drivers using cxllib that we're 
> trying to get in during this cycle?

That was a Mellanox request, so that they can enable code in their 
driver. Like we've done previously, I expect we should be able to drop 
it once their code is upstream.

   Fred