From: vb <vb@vsbe.com>
To: linuxppc-embedded@ozlabs.org
Subject: EMAC2 in ibm_newemac driver
Date: Wed, 1 Oct 2008 21:38:32 -0700 [thread overview]
Message-ID: <f608b67d0810012138w64ba5ecbg1f88fff505c820b7@mail.gmail.com> (raw)
I have a 460GT based system with three ethernet interfaces, and I
don't seem to be able to bring up EMAC2 in RGMII mode. The PHY works
just fine, the counterpart on the other side of the serdes link
autonegotiates successfully, etc. When I attempt to send something
from the interface though, nothing shows up on the RGMII lines (I use
a scope to probe it). The received traffic is passed from the PHY to
the MAC, but again, nothing is reported by the rx driver.
I am using the latest released code from 2.6.26.5 (I started with
2.6.25 release, and in that case just EMAC0 worked, updgrading to to
2.6.26.5 made the second interface work, but the third one seems to be
stuck. I see that the Denx tree has a lot of changes in the driver,
but it is not as cleanly portable, so advancing there is not an
option.
I am trying to debug it, but am wondering if anyone had more than two
interfaces going on this architecture and if so - what are the
gotchas.
Any hints will be highly appreciated,
cheers,
VadimB
next reply other threads:[~2008-10-02 4:38 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-02 4:38 vb [this message]
2008-10-02 5:51 ` EMAC2 in ibm_newemac driver Stefan Roese
2008-10-03 4:57 ` vb
2008-10-03 14:37 ` Stefan Roese
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f608b67d0810012138w64ba5ecbg1f88fff505c820b7@mail.gmail.com \
--to=vb@vsbe.com \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).