From: "Pradyumna Sampath" <pradyumna.sampath@gmail.com>
To: "Nicholas Hickman" <nhickman@dtechlabs.com>
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: mpc8270 & Intel 82551ER on 2.6.17.14
Date: Fri, 29 Jun 2007 13:42:29 +0530 [thread overview]
Message-ID: <f87351060706290112o407f75e5h9dffd9939ab80ef9@mail.gmail.com> (raw)
In-Reply-To: <8140AAF341CC904BA92C3D6A5A1909782A2FA3@ditech-1.ditechllc.com>
Hi Nicholas,
On 6/29/07, Nicholas Hickman <nhickman@dtechlabs.com> wrote:
>
>
> I am having trouble getting two 82551ER Ethernet controllers running in
> Linux. I am able to scan the PCI bus and see the devices and I was even
> able to program the EEPROM from U-boot.
>
> In the kernel I mapped the IRQ's through /arch/ppc/m82xx_pci.c. I've been
> using the e100 drive that comes with the 2.6.17.14 kernel and have also
> tried the driver directly from Intel. Both give the same results. The PCI
> scan shows the correct output for how the device should be configured.
<snip..>
I have the same, exact same problem. But there are some of the
differences with the setup though. I have an MPC5200B and the other
difference is that I have a 2.6.21-rt3. However its the same ethernet
controller.
I am trying out a few things here, some of them being complete
guesses. But if I hit something, I will let this list know. Anyone
else had similar issues ? Request you to please holler.
regards
prady
--
htp://prady.livejournal.com
next prev parent reply other threads:[~2007-06-29 8:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-28 22:53 mpc8270 & Intel 82551ER on 2.6.17.14 Nicholas Hickman
2007-06-29 8:12 ` Pradyumna Sampath [this message]
2007-07-02 18:41 ` Nicholas Hickman
-- strict thread matches above, loose matches on Subject: below --
2007-06-29 16:48 Muruga Ganapathy
2007-06-29 16:54 ` Nicholas Hickman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f87351060706290112o407f75e5h9dffd9939ab80ef9@mail.gmail.com \
--to=pradyumna.sampath@gmail.com \
--cc=linuxppc-embedded@ozlabs.org \
--cc=nhickman@dtechlabs.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).