Re: 85xx Device tree problems: e0024520:02 not found

["robert lazarski" <robertlazarski@gmail.com>]

On Nov 13, 2007 3:33 PM, Clemens Koller <clemens.koller@anagramm.de> wrote:
> robert lazarski schrieb:
>  > Hi all,
>  >
>  > I'm trying to bring up a new 8548 board on 2.6.23.1 . When booting,
>  > Some times I can get as far mounting over nfs. However, it gets stuck
>  > here:
>  >
>  > NET: Registered protocol family 1
>  > NET: Registered protocol family 17
>  > e0024520:02 not found
>  > eth2: Could not attach to PHY
>  > IP-Config: Failed to open eth2
>  > IP-Config: Device `eth2' not found.
>
> As already written in the u-boot-users list,
> you could give the pauilis.git tree a try.
>
> There have been recently (last month) several
> PHY related changes. 2.6.23.1 seems to be too
> "old".
>

I'm now running pauilis.git and 2.6.24rc2, along with a new custom
board. I still can't attach to the phy though. I know the phy works
because it works fine in u-boot. Clemens, IIRC you are using the
88e1111 - is that with the gianfar driver? I'm having problems getting
soft reboot to work with pauilis.git from some reason so debugging is
slow going - might someone have some hints?

Thanks,
Robert