linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
* Need Help
@ 2000-01-10 19:30 Pravin Pathak
  2000-01-12  9:35 ` Gabriel Paubert
  0 siblings, 1 reply; 4+ messages in thread
From: Pravin Pathak @ 2000-01-10 19:30 UTC (permalink / raw)
  To: linuxppc-embedded@lists.linuxppc.org


Hi,
I need to port Linux on our hardware with
603e processor and cpc700 MMU. There is no disk support.
We do have flash ROM and ethernet on board.
Can anyone suggest a site I can download this port OR
a close match ?

Regards
Pravin


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Need Help
  2000-01-10 19:30 Need Help Pravin Pathak
@ 2000-01-12  9:35 ` Gabriel Paubert
  0 siblings, 0 replies; 4+ messages in thread
From: Gabriel Paubert @ 2000-01-12  9:35 UTC (permalink / raw)
  To: Pravin Pathak; +Cc: linuxppc-embedded@lists.linuxppc.org




On Mon, 10 Jan 2000, Pravin Pathak wrote:

> 
> Hi,
> I need to port Linux on our hardware with
> 603e processor and cpc700 MMU. There is no disk support.
> We do have flash ROM and ethernet on board.
> Can anyone suggest a site I can download this port OR
> a close match ?

You might want to see if my patches for MVME2600 and especially the
bootloader part in arch/ppc/prepboot help. They are available at 

	ftp://vlab1.iram.es/pub/linux-2.2/

you will still need to perform the early setup of the CPC700, modify
the UART address etc...but the code includes things like PCI resource
allocation and is flexible enough to be adapted to a variety of PCI I/O
base addresses, memory offsets etc...

	Regards,
	Gabriel.


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Need help.
@ 2005-03-22  5:15 Naveen Kumar Atmakuri
  2005-03-22 21:36 ` Kumar Gala
  0 siblings, 1 reply; 4+ messages in thread
From: Naveen Kumar Atmakuri @ 2005-03-22  5:15 UTC (permalink / raw)
  To: linuxppc-embedded

[-- Attachment #1: Type: text/plain, Size: 362 bytes --]

Hi everybody,

Could any one suggest the toolchain and kernel versions that are compatible with the MPC7448 processor ( It's a motorola processor based on power PC architecture ). Is there any site from where we can download the precompiled binaries for the same processor.

With Regards& Thanks,
A.Naveen Kumar,
Design Engineer,
Mistral Software Pvt Ltd.

[-- Attachment #2: Type: text/html, Size: 885 bytes --]

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Need help.
  2005-03-22  5:15 Need help Naveen Kumar Atmakuri
@ 2005-03-22 21:36 ` Kumar Gala
  0 siblings, 0 replies; 4+ messages in thread
From: Kumar Gala @ 2005-03-22 21:36 UTC (permalink / raw)
  To: Naveen Kumar Atmakuri; +Cc: linuxppc-embedded

While I can specify a place for you to get precompiled binaries for=20
MPC7448, I can suggest grabbing crosstool from:
    http://www.kegel.com/crosstool/

There is a 7450 config which will work for MPC7448.

- kumar


On Mar 21, 2005, at 11:15 PM, Naveen Kumar Atmakuri wrote:

> Hi everybody,
> =A0
> Could any one suggest the toolchain and kernel versions that are=20
> compatible with the MPC7448 processor ( It's a motorola processor=20
> based on power PC architecture ). Is there any site from where we can=20=

> download the precompiled binaries for the same processor.
> =A0
> With Regards& Thanks,
> A.Naveen Kumar,
> Design Engineer,
> Mistral Software Pvt Ltd.
> <ATT92461.txt>=

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2005-03-22 21:36 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-03-22  5:15 Need help Naveen Kumar Atmakuri
2005-03-22 21:36 ` Kumar Gala
  -- strict thread matches above, loose matches on Subject: below --
2000-01-10 19:30 Need Help Pravin Pathak
2000-01-12  9:35 ` Gabriel Paubert

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).