Hi, I am having trouble building u-boot (from u-boot-2009.11-mpc8572ds.spec) from LTIB for the MPC8572DS platform using just the Makefile and freescale cross tools. The build machine is CentOS 5.3. This is procedure I am following (on LTIB for MPC8572DS, 20100115):

# cd ltib-mpc8572ds-20100115
# ./ltib -m prep -p u-boot-2009.11-mpc8572ds.spec
# ./ltib -m scbuild -p u-boot-2009.11-mpc8572ds.spec
# cd rpm/BUILD/

2. confirm configuration and make

# cd u-boot-2009.11-rc1-19

# make ARCH=powerpc CROSS_COMPILE=/......../bin/powerpc-none-linux-gnuspe- MPC8572DS_NAND_config
# make ARCH=powerpc CROSS_COMPILE=/......../bin/powerpc-none-linux-gnuspe- all

but i'm getting (several) compile errors from the make. It goes for a while, then gets errors at different points, depending on how much it has to build:

Usually, just syntax errors or something like:

make -C lib_powerpc/
make: *** lib_powerpc/: No such file or directory. Stop.
make: *** [lib_powerpc/libpowerpc.a] Error 2
....however I can still build using ./ltib???

shouldn't I be able to build from make? (as per the MPC8572DS NAND bootloader User Manual HTML doc)? Is there some other way I should be building? Any help would be much appreciated!

Thanks very much,

Troy