* Need confirmation on MP8349 configuration problem
@ 2007-09-10 18:28 Grant Likely
0 siblings, 0 replies; only message in thread
From: Grant Likely @ 2007-09-10 18:28 UTC (permalink / raw)
To: Timur Tabi, linuxppc-embedded
Hey Timur,
As we talked about on IRC, I'm having problems getting the BDI-2000 to
configure the MPC8349 when CFG_RESET_SOURCE is set to a hard coded
config (Like 100 or 111).
Can you please confirm what I'm seeing on one of your boards?
Steps to reproduce:
1. Set BDI config to override default RCW and initialize FLASH/RAM
2. Power up board and verify that BDI can read DDR and FLASH (using md commands)
3. Power down and remove jumpers A, B & C.
4. Power up and read DDR/FLASH again. At this point I get '# SAP:
read access failed' from the BDI-2000.
Thanks,
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2007-09-10 18:28 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-09-10 18:28 Need confirmation on MP8349 configuration problem Grant Likely
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).