linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Grant Likely" <grant.likely@secretlab.ca>
To: "Jon Smirl" <jonsmirl@gmail.com>, "Timur Tabi" <timur@freescale.com>
Cc: Linuxppc-dev@ozlabs.org, i2c@lm-sensors.org
Subject: Re: [PATCH 1/2] Convert i2c-mpc from a platform driver into a of_platform driver, V4
Date: Wed, 9 Jul 2008 11:22:36 -0600	[thread overview]
Message-ID: <fa686aa40807091022q22f6be99j89f311780bd3d369@mail.gmail.com> (raw)
In-Reply-To: <20080630230126.12482.87927.stgit@terra>

On Mon, Jun 30, 2008 at 5:01 PM, Jon Smirl <jonsmirl@gmail.com> wrote:
> Convert i2c-mpc to an of_platform driver. Utilize the code in drivers/of-i2c.c to make i2c modules dynamically loadable by the device tree.

Timur, can you please test this one on an 83xx platform?  It works on
5200, but I want to make sure 83xx doesn't break before I pick it up.

Thanks,
g.

>
> Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
> ---
>
>  arch/powerpc/sysdev/fsl_soc.c |  122 -----------------------------------------
>  drivers/i2c/busses/i2c-mpc.c  |  104 ++++++++++++++++++++---------------
>  2 files changed, 60 insertions(+), 166 deletions(-)
>
> diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
> index 3a7054e..ebcec73 100644
> --- a/arch/powerpc/sysdev/fsl_soc.c
> +++ b/arch/powerpc/sysdev/fsl_soc.c
> @@ -414,128 +414,6 @@ err:
>
>  arch_initcall(gfar_of_init);
>
> -#ifdef CONFIG_I2C_BOARDINFO
> -#include <linux/i2c.h>
> -struct i2c_driver_device {
> -       char    *of_device;
> -       char    *i2c_type;
> -};
> -
> -static struct i2c_driver_device i2c_devices[] __initdata = {
> -       {"ricoh,rs5c372a", "rs5c372a"},
> -       {"ricoh,rs5c372b", "rs5c372b"},
> -       {"ricoh,rv5c386",  "rv5c386"},
> -       {"ricoh,rv5c387a", "rv5c387a"},
> -       {"dallas,ds1307",  "ds1307"},
> -       {"dallas,ds1337",  "ds1337"},
> -       {"dallas,ds1338",  "ds1338"},
> -       {"dallas,ds1339",  "ds1339"},
> -       {"dallas,ds1340",  "ds1340"},
> -       {"stm,m41t00",     "m41t00"},
> -       {"dallas,ds1374",  "rtc-ds1374"},
> -};
> -
> -static int __init of_find_i2c_driver(struct device_node *node,
> -                                    struct i2c_board_info *info)
> -{
> -       int i;
> -
> -       for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
> -               if (!of_device_is_compatible(node, i2c_devices[i].of_device))
> -                       continue;
> -               if (strlcpy(info->type, i2c_devices[i].i2c_type,
> -                           I2C_NAME_SIZE) >= I2C_NAME_SIZE)
> -                       return -ENOMEM;
> -               return 0;
> -       }
> -       return -ENODEV;
> -}
> -
> -static void __init of_register_i2c_devices(struct device_node *adap_node,
> -                                          int bus_num)
> -{
> -       struct device_node *node = NULL;
> -
> -       while ((node = of_get_next_child(adap_node, node))) {
> -               struct i2c_board_info info = {};
> -               const u32 *addr;
> -               int len;
> -
> -               addr = of_get_property(node, "reg", &len);
> -               if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) {
> -                       printk(KERN_WARNING "fsl_soc.c: invalid i2c device entry\n");
> -                       continue;
> -               }
> -
> -               info.irq = irq_of_parse_and_map(node, 0);
> -               if (info.irq == NO_IRQ)
> -                       info.irq = -1;
> -
> -               if (of_find_i2c_driver(node, &info) < 0)
> -                       continue;
> -
> -               info.addr = *addr;
> -
> -               i2c_register_board_info(bus_num, &info, 1);
> -       }
> -}
> -
> -static int __init fsl_i2c_of_init(void)
> -{
> -       struct device_node *np;
> -       unsigned int i = 0;
> -       struct platform_device *i2c_dev;
> -       int ret;
> -
> -       for_each_compatible_node(np, NULL, "fsl-i2c") {
> -               struct resource r[2];
> -               struct fsl_i2c_platform_data i2c_data;
> -               const unsigned char *flags = NULL;
> -
> -               memset(&r, 0, sizeof(r));
> -               memset(&i2c_data, 0, sizeof(i2c_data));
> -
> -               ret = of_address_to_resource(np, 0, &r[0]);
> -               if (ret)
> -                       goto err;
> -
> -               of_irq_to_resource(np, 0, &r[1]);
> -
> -               i2c_dev = platform_device_register_simple("fsl-i2c", i, r, 2);
> -               if (IS_ERR(i2c_dev)) {
> -                       ret = PTR_ERR(i2c_dev);
> -                       goto err;
> -               }
> -
> -               i2c_data.device_flags = 0;
> -               flags = of_get_property(np, "dfsrr", NULL);
> -               if (flags)
> -                       i2c_data.device_flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
> -
> -               flags = of_get_property(np, "fsl5200-clocking", NULL);
> -               if (flags)
> -                       i2c_data.device_flags |= FSL_I2C_DEV_CLOCK_5200;
> -
> -               ret =
> -                   platform_device_add_data(i2c_dev, &i2c_data,
> -                                            sizeof(struct
> -                                                   fsl_i2c_platform_data));
> -               if (ret)
> -                       goto unreg;
> -
> -               of_register_i2c_devices(np, i++);
> -       }
> -
> -       return 0;
> -
> -unreg:
> -       platform_device_unregister(i2c_dev);
> -err:
> -       return ret;
> -}
> -
> -arch_initcall(fsl_i2c_of_init);
> -#endif
>
>  #ifdef CONFIG_PPC_83xx
>  static int __init mpc83xx_wdt_init(void)
> diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
> index a076129..4fdfb62 100644
> --- a/drivers/i2c/busses/i2c-mpc.c
> +++ b/drivers/i2c/busses/i2c-mpc.c
> @@ -17,7 +17,8 @@
>  #include <linux/module.h>
>  #include <linux/sched.h>
>  #include <linux/init.h>
> -#include <linux/platform_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_i2c.h>
>
>  #include <asm/io.h>
>  #include <linux/fsl_devices.h>
> @@ -25,13 +26,13 @@
>  #include <linux/interrupt.h>
>  #include <linux/delay.h>
>
> -#define MPC_I2C_ADDR  0x00
> +#define DRV_NAME "mpc-i2c"
> +
>  #define MPC_I2C_FDR    0x04
>  #define MPC_I2C_CR     0x08
>  #define MPC_I2C_SR     0x0c
>  #define MPC_I2C_DR     0x10
>  #define MPC_I2C_DFSRR 0x14
> -#define MPC_I2C_REGION 0x20
>
>  #define CCR_MEN  0x80
>  #define CCR_MIEN 0x40
> @@ -315,102 +316,117 @@ static struct i2c_adapter mpc_ops = {
>        .timeout = 1,
>  };
>
> -static int fsl_i2c_probe(struct platform_device *pdev)
> +static int __devinit fsl_i2c_probe(struct of_device *op, const struct of_device_id *match)
>  {
>        int result = 0;
>        struct mpc_i2c *i2c;
> -       struct fsl_i2c_platform_data *pdata;
> -       struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -
> -       pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data;
>
>        i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
>        if (!i2c)
>                return -ENOMEM;
>
> -       i2c->irq = platform_get_irq(pdev, 0);
> -       if (i2c->irq < 0)
> -               i2c->irq = NO_IRQ; /* Use polling */
> +       if (of_get_property(op->node, "dfsrr", NULL))
> +               i2c->flags |= FSL_I2C_DEV_SEPARATE_DFSRR;
>
> -       i2c->flags = pdata->device_flags;
> -       init_waitqueue_head(&i2c->queue);
> +       if (of_device_is_compatible(op->node, "fsl,mpc5200-i2c") ||
> +                       of_device_is_compatible(op->node, "mpc5200-i2c"))
> +               i2c->flags |= FSL_I2C_DEV_CLOCK_5200;
>
> -       i2c->base = ioremap((phys_addr_t)r->start, MPC_I2C_REGION);
> +       init_waitqueue_head(&i2c->queue);
>
> +       i2c->base = of_iomap(op->node, 0);
>        if (!i2c->base) {
>                printk(KERN_ERR "i2c-mpc - failed to map controller\n");
>                result = -ENOMEM;
>                goto fail_map;
>        }
>
> -       if (i2c->irq != NO_IRQ)
> -               if ((result = request_irq(i2c->irq, mpc_i2c_isr,
> -                                         IRQF_SHARED, "i2c-mpc", i2c)) < 0) {
> -                       printk(KERN_ERR
> -                              "i2c-mpc - failed to attach interrupt\n");
> -                       goto fail_irq;
> +       i2c->irq = irq_of_parse_and_map(op->node, 0);
> +       if (i2c->irq != NO_IRQ) { /* i2c->irq = NO_IRQ implies polling */
> +               result = request_irq(i2c->irq, mpc_i2c_isr,
> +                                    IRQF_SHARED, "i2c-mpc", i2c);
> +               if (result < 0) {
> +                       printk(KERN_ERR "i2c-mpc - failed to attach interrupt\n");
> +                       goto fail_request;
>                }
> -
> +       }
> +
>        mpc_i2c_setclock(i2c);
> -       platform_set_drvdata(pdev, i2c);
> +
> +       dev_set_drvdata(&op->dev, i2c);
>
>        i2c->adap = mpc_ops;
> -       i2c->adap.nr = pdev->id;
>        i2c_set_adapdata(&i2c->adap, i2c);
> -       i2c->adap.dev.parent = &pdev->dev;
> -       if ((result = i2c_add_numbered_adapter(&i2c->adap)) < 0) {
> +       i2c->adap.dev.parent = &op->dev;
> +
> +       result = i2c_add_adapter(&i2c->adap);
> +       if (result < 0) {
>                printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
>                goto fail_add;
>        }
> +       of_register_i2c_devices(&i2c->adap, op->node);
>
>        return result;
>
> -      fail_add:
> -       if (i2c->irq != NO_IRQ)
> -               free_irq(i2c->irq, i2c);
> -      fail_irq:
> -       iounmap(i2c->base);
> -      fail_map:
> + fail_add:
> +       dev_set_drvdata(&op->dev, NULL);
> +       free_irq(i2c->irq, i2c);
> + fail_request:
> +       irq_dispose_mapping(i2c->irq);
> +       iounmap(i2c->base);
> + fail_map:
>        kfree(i2c);
>        return result;
>  };
>
> -static int fsl_i2c_remove(struct platform_device *pdev)
> +static int __devexit fsl_i2c_remove(struct of_device *op)
>  {
> -       struct mpc_i2c *i2c = platform_get_drvdata(pdev);
> +       struct mpc_i2c *i2c = dev_get_drvdata(&op->dev);
>
>        i2c_del_adapter(&i2c->adap);
> -       platform_set_drvdata(pdev, NULL);
> +       dev_set_drvdata(&op->dev, NULL);
>
>        if (i2c->irq != NO_IRQ)
>                free_irq(i2c->irq, i2c);
>
> +       irq_dispose_mapping(i2c->irq);
>        iounmap(i2c->base);
>        kfree(i2c);
>        return 0;
>  };
>
> -/* work with hotplug and coldplug */
> -MODULE_ALIAS("platform:fsl-i2c");
> +static const struct of_device_id mpc_i2c_of_match[] = {
> +       {.compatible = "fsl-i2c",},
> +       {},
> +};
> +MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
> +
>
>  /* Structure for a device driver */
> -static struct platform_driver fsl_i2c_driver = {
> -       .probe = fsl_i2c_probe,
> -       .remove = fsl_i2c_remove,
> -       .driver = {
> -               .owner = THIS_MODULE,
> -               .name = "fsl-i2c",
> +static struct of_platform_driver mpc_i2c_driver = {
> +       .match_table    = mpc_i2c_of_match,
> +       .probe          = fsl_i2c_probe,
> +       .remove         = __devexit_p(fsl_i2c_remove),
> +       .driver         = {
> +               .owner  = THIS_MODULE,
> +               .name   = DRV_NAME,
>        },
>  };
>
>  static int __init fsl_i2c_init(void)
>  {
> -       return platform_driver_register(&fsl_i2c_driver);
> +       int rv;
> +
> +       rv = of_register_platform_driver(&mpc_i2c_driver);
> +       if (rv)
> +               printk(KERN_ERR DRV_NAME
> +                      " of_register_platform_driver failed (%i)\n", rv);
> +       return rv;
>  }
>
>  static void __exit fsl_i2c_exit(void)
>  {
> -       platform_driver_unregister(&fsl_i2c_driver);
> +       of_unregister_platform_driver(&mpc_i2c_driver);
>  }
>
>  module_init(fsl_i2c_init);
>
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>



-- 
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

  parent reply	other threads:[~2008-07-09 17:22 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-30 23:01 [PATCH 1/2] Convert i2c-mpc from a platform driver into a of_platform driver, V4 Jon Smirl
2008-06-30 23:01 ` [PATCH 2/2] Add the of_find_i2c_device_by_node function, V4 Jon Smirl
2008-07-01 15:05   ` Jean Delvare
2008-07-01 15:12     ` Jon Smirl
2008-07-01 16:29       ` Jean Delvare
2008-07-01 16:38         ` Jon Smirl
2008-07-01 16:44           ` Jean Delvare
2008-07-01 16:45         ` Grant Likely
2008-07-01 17:01           ` Jean Delvare
2008-07-01 17:06             ` Jon Smirl
2008-07-01 18:24               ` Jean Delvare
2008-07-01 16:43       ` Grant Likely
2008-07-01 17:00         ` Jon Smirl
2008-07-01 17:12           ` Jean Delvare
2008-07-01 17:27             ` Jon Smirl
2008-07-01 18:18               ` Jon Smirl
2008-07-01 18:51               ` Jean Delvare
2008-07-01 15:48     ` Jochen Friedrich
2008-07-01 16:29     ` Jon Smirl
2008-07-01 16:35       ` Jean Delvare
2008-07-01 16:14 ` [PATCH 1/2] Convert i2c-mpc from a platform driver into a of_platform driver, V4 Jean Delvare
2008-07-02 13:33   ` [i2c] " Wolfram Sang
2008-07-02 14:36     ` Jean Delvare
2008-07-09 17:22 ` Grant Likely [this message]
2008-07-10 16:36   ` Timur Tabi
2008-07-11 18:12     ` Grant Likely
2008-07-11 18:45       ` Anton Vorontsov
2008-07-11 18:54         ` Grant Likely

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fa686aa40807091022q22f6be99j89f311780bd3d369@mail.gmail.com \
    --to=grant.likely@secretlab.ca \
    --cc=Linuxppc-dev@ozlabs.org \
    --cc=i2c@lm-sensors.org \
    --cc=jonsmirl@gmail.com \
    --cc=timur@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).