From: Grant Likely <grant.likely@secretlab.ca>
To: Jon Smirl <jonsmirl@gmail.com>
Cc: linuxppc-dev@ozlabs.org
Subject: Re: [PATCH] powerpc/mpc52xx: add Phytec phyCORE-MPC5200B-IO board (pcm032)
Date: Sun, 1 Mar 2009 18:07:33 -0700 [thread overview]
Message-ID: <fa686aa40903011707q3c142942w962c52abaf915629@mail.gmail.com> (raw)
In-Reply-To: <9e4733910903011646g43b151c2m7c6dfe80ac07e80a@mail.gmail.com>
On Sun, Mar 1, 2009 at 5:46 PM, Jon Smirl <jonsmirl@gmail.com> wrote:
> On Sun, Mar 1, 2009 at 7:37 PM, Jon Smirl <jonsmirl@gmail.com> wrote:
>> Just tried it on pcm030. If I uncomment the reg line the kernel won't
>> boot at all. I don't get any output.
>
> I hooked up a serial console instead of netcat.
>
> PCI: Probing PCI hardware
> PCI: Scanning bus 0000:00
> Machine check in kernel mode.
> Caused by (from SRR1=3D41030): Transfer error ack signal
> Oops: Machine check, sig: 7 [#1]
> dspeak01
Yeah, there current PCI driver in mainline expects the bootloader to
set stuff up for PCI to work. I've fixed some of it, and the fix is
queued up in Ben's -next tree. Can you try Ben's -next tree?
Thanks,
g.
> Modules linked in:
> NIP: c001be94 LR: c0158cb4 CTR: c001be04
> REGS: c3823de0 TRAP: 0200 =A0 Not tainted =A0(2.6.29-rc6-efika)
> MSR: 00041030 <ME,IR,DR> =A0CR: 28000022 =A0XER: 20000000
> TASK =3D c3824000[1] 'swapper' THREAD: c3822000
> GPR00: 80000000 c3823e90 c3824000 c3856000 00000000 00000000 00000004 c38=
23eb8
> GPR08: c03a9848 fcffc000 000008bc 0020213c 82000022 ffefffff 03ffe000 fff=
fffff
> GPR16: 00000001 00000000 007ffc00 00000000 00000000 03ff8838 00000000 000=
00004
> GPR24: 00000000 00000000 c3823eb8 00000000 00000004 00000000 c03c0000 c38=
56000
> NIP [c001be94] mpc52xx_pci_read_config+0x90/0xec
> LR [c0158cb4] pci_bus_read_config_dword+0x4c/0x74
> Call Trace:
> [c3823e90] [c0091238] ifind+0x18/0x6c (unreliable)
> [c3823eb0] [c0158cb4] pci_bus_read_config_dword+0x4c/0x74
> [c3823ee0] [c0278a90] pci_scan_single_device+0x24/0x4b0
> [c3823f10] [c0159d50] pci_scan_slot+0x2c/0x84
> [c3823f30] [c027b2d4] pci_scan_child_bus+0x40/0x108
> [c3823f50] [c0351c34] pcibios_init+0xdc/0x190
> [c3823f70] [c00038f4] do_one_initcall+0x58/0x19c
> [c3823fe0] [c034614c] kernel_init+0x74/0xe0
> [c3823ff0] [c00133d4] kernel_thread+0x4c/0x68
> Instruction dump:
> 817e0040 5400801e 7c004b78 5769063a 64008000 7d290378 7c0004ac 912b0000
> 7c0004ac 813e0044 7c0004ac 7d604c2c <0c0b0000> 4c00012c 2f9c0004 57601ef8
> ---[ end trace 31fd0ba7d8756001 ]---
> Kernel panic - not syncing: Attempted to kill init!
> Rebooting in 180 seconds..
>
>
> --
> Jon Smirl
> jonsmirl@gmail.com
>
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
next prev parent reply other threads:[~2009-03-02 1:07 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-25 15:32 [PATCH] powerpc/mpc52xx: add Phytec phyCORE-MPC5200B-IO board (pcm032) Wolfram Sang
2009-02-25 15:40 ` Wolfram Sang
2009-02-27 5:31 ` Grant Likely
2009-03-01 10:18 ` Wolfram Sang
2009-03-01 14:48 ` Grant Likely
2009-03-01 15:54 ` Jon Smirl
2009-03-01 22:47 ` Grant Likely
2009-03-02 0:37 ` Jon Smirl
2009-03-02 0:46 ` Jon Smirl
2009-03-02 1:07 ` Grant Likely [this message]
2009-03-02 2:15 ` Jon Smirl
2009-03-02 2:19 ` Jon Smirl
2009-03-02 4:33 ` Grant Likely
2009-03-03 8:12 ` Robert Schwebel
2009-03-07 2:01 ` Jon Smirl
2009-03-10 16:03 ` [PATCH v2] " Wolfram Sang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fa686aa40903011707q3c142942w962c52abaf915629@mail.gmail.com \
--to=grant.likely@secretlab.ca \
--cc=jonsmirl@gmail.com \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).