linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Grant Likely <grant.likely@secretlab.ca>
To: Anton Vorontsov <avorontsov@ru.mvista.com>,
	Becky Bruce <Becky.Bruce@freescale.com>,
	Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@ozlabs.org, alsa-devel@alsa-project.org,
	Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Timur Tabi <timur@freescale.com>,
	Liam Girdwood <lrg@slimlogic.co.uk>
Subject: Re: [PATCH] ASoC: fsl_dma: Pass the proper device for dma mapping routines
Date: Sat, 4 Apr 2009 23:59:39 -0600	[thread overview]
Message-ID: <fa686aa40904042259h4c69e632x47a9e82393e8faef@mail.gmail.com> (raw)
In-Reply-To: <20090404183319.GA22203@oksana.dev.rtsoft.ru>

Becky & Kumar,

Considering these fixups, would it be advisable for the dma functions
to climb up the dev->parent linkage when dma_ops are NULL?

g.

On Sat, Apr 4, 2009 at 12:33 PM, Anton Vorontsov
<avorontsov@ru.mvista.com> wrote:
> The driver should pass a device that specifies internal DMA ops, but
> substream->pcm is just a logical device, and thus doesn't have arch-
> specific dma callbacks, therefore following bug appears:
>
> =A0Freescale Synchronous Serial Interface (SSI) ASoC Driver
> =A0------------[ cut here ]------------
> =A0kernel BUG at arch/powerpc/include/asm/dma-mapping.h:237!
> =A0Oops: Exception in kernel mode, sig: 5 [#1]
> =A0...
> =A0NIP [c02259c4] snd_malloc_dev_pages+0x58/0xac
> =A0LR [c0225c74] snd_dma_alloc_pages+0xf8/0x108
> =A0Call Trace:
> =A0[df02bde0] [df02be2c] 0xdf02be2c (unreliable)
> =A0[df02bdf0] [c0225c74] snd_dma_alloc_pages+0xf8/0x108
> =A0[df02be10] [c023a100] fsl_dma_new+0x68/0x124
> =A0[df02be20] [c02342ac] soc_new_pcm+0x1bc/0x234
> =A0[df02bea0] [c02343dc] snd_soc_new_pcms+0xb8/0x148
> =A0[df02bed0] [c023824c] cs4270_probe+0x34/0x124
> =A0[df02bef0] [c0232fe8] snd_soc_instantiate_card+0x1a4/0x2f4
> =A0[df02bf20] [c0233164] snd_soc_instantiate_cards+0x2c/0x68
> =A0[df02bf30] [c0234704] snd_soc_register_platform+0x60/0x80
> =A0[df02bf50] [c03d5664] fsl_soc_platform_init+0x18/0x28
> =A0...
>
> This patch fixes the issue by using card's device instead.
>
> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
> ---
> =A0sound/soc/fsl/fsl_dma.c | =A0 12 ++++++------
> =A01 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/sound/soc/fsl/fsl_dma.c b/sound/soc/fsl/fsl_dma.c
> index b3eb857..835e43c 100644
> --- a/sound/soc/fsl/fsl_dma.c
> +++ b/sound/soc/fsl/fsl_dma.c
> @@ -300,7 +300,7 @@ static int fsl_dma_new(struct snd_card *card, struct =
snd_soc_dai *dai,
> =A0 =A0 =A0 =A0if (!card->dev->coherent_dma_mask)
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0card->dev->coherent_dma_mask =3D fsl_dma_d=
mamask;
>
> - =A0 =A0 =A0 ret =3D snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->dev,
> + =A0 =A0 =A0 ret =3D snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, card->dev,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0fsl_dma_hardware.buffer_bytes_max,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0&pcm->streams[0].substream->dma_buffer);
> =A0 =A0 =A0 =A0if (ret) {
> @@ -310,7 +310,7 @@ static int fsl_dma_new(struct snd_card *card, struct =
snd_soc_dai *dai,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0return -ENOMEM;
> =A0 =A0 =A0 =A0}
>
> - =A0 =A0 =A0 ret =3D snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, pcm->dev,
> + =A0 =A0 =A0 ret =3D snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, card->dev,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0fsl_dma_hardware.buffer_bytes_max,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0&pcm->streams[1].substream->dma_buffer);
> =A0 =A0 =A0 =A0if (ret) {
> @@ -418,7 +418,7 @@ static int fsl_dma_open(struct snd_pcm_substream *sub=
stream)
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0return -EBUSY;
> =A0 =A0 =A0 =A0}
>
> - =A0 =A0 =A0 dma_private =3D dma_alloc_coherent(substream->pcm->dev,
> + =A0 =A0 =A0 dma_private =3D dma_alloc_coherent(substream->pcm->card->de=
v,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0sizeof(struct fsl_dma_private), &ld_buf_ph=
ys, GFP_KERNEL);
> =A0 =A0 =A0 =A0if (!dma_private) {
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0dev_err(substream->pcm->card->dev,
> @@ -445,7 +445,7 @@ static int fsl_dma_open(struct snd_pcm_substream *sub=
stream)
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0dev_err(substream->pcm->card->dev,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0"can't register ISR for IR=
Q %u (ret=3D%i)\n",
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0dma_private->irq, ret);
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 dma_free_coherent(substream->pcm->dev,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 dma_free_coherent(substream->pcm->card->dev=
,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0sizeof(struct fsl_dma_priv=
ate),
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0dma_private, dma_private->=
ld_buf_phys);
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0return ret;
> @@ -761,13 +761,13 @@ static int fsl_dma_close(struct snd_pcm_substream *=
substream)
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0free_irq(dma_private->irq,=
 dma_private);
>
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0if (dma_private->ld_buf_phys) {
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 dma_unmap_single(substream-=
>pcm->dev,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 dma_unmap_single(substream-=
>pcm->card->dev,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0dma_privat=
e->ld_buf_phys,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0sizeof(dma=
_private->link), DMA_TO_DEVICE);
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0}
>
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0/* Deallocate the fsl_dma_private structur=
e */
> - =A0 =A0 =A0 =A0 =A0 =A0 =A0 dma_free_coherent(substream->pcm->dev,
> + =A0 =A0 =A0 =A0 =A0 =A0 =A0 dma_free_coherent(substream->pcm->card->dev=
,
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0sizeof(struct fsl_dma_priv=
ate),
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0dma_private, dma_private->=
ld_buf_phys);
> =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0substream->runtime->private_data =3D NULL;
> --
> 1.5.6.5
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>



--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

  reply	other threads:[~2009-04-05  5:59 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-04 18:33 [PATCH] ASoC: fsl_dma: Pass the proper device for dma mapping routines Anton Vorontsov
2009-04-05  5:59 ` Grant Likely [this message]
2009-04-05  8:52   ` Anton Vorontsov
2009-04-05 14:39     ` Grant Likely
2009-04-05 14:59       ` Kumar Gala
2009-04-05 19:18         ` Timur Tabi
2009-04-06 21:06 ` Timur Tabi
2009-04-06 22:38   ` [alsa-devel] " Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=fa686aa40904042259h4c69e632x47a9e82393e8faef@mail.gmail.com \
    --to=grant.likely@secretlab.ca \
    --cc=Becky.Bruce@freescale.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=avorontsov@ru.mvista.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=galak@kernel.crashing.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=lrg@slimlogic.co.uk \
    --cc=timur@freescale.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).